High-Step-Down DC–DC Converter With Continuous Output Current Using Coupled-Inductors

This paper proposes a high-step-down dc–dc converter with continuous output current which utilizes coupled-inductors. Another main feature of this converter is applying the same number of switches as the synchronous buck converter. The introduced converter is suitable for non-isolated low-voltage high-current applications, especially voltage regulator modules (VRMs) with 12-V-input. Owing to extension of the duty cycle, the main mosfet current stress and the synchronous rectifier switch voltage stress are significantly reduced. However, the discharge of the leakage inductance energy increases the main mosfet voltage stress. By employing a simple lossless clamp/snubber circuit the leakage inductance energy is recovered, the voltage spike across the main mosfet is clamped, and the turn-off switching losses are reduced. There is at least one inductor in all current paths which creates an intrinsic protection against current shoot-through and provides zero-current-switching (ZCS) turn-on for the main mosfet. High efficiency is attained by the proposed converter due to extended duty cycle, low number of switches, and soft switching operation while the converter driver is just like the conventional buck converter. Due to the single-phase structure of the proposed converter, this converter is a viable alternative to the buck VRM. Similar to the other converters using coupled-inductors, the complexity of coupled-inductors design and the space occupied by coupled-inductors can be considered as drawbacks. A prototype of the proposed converter is implemented to verify the converter operation and the theoretical analysis.