Guidelines to Avoid Mould Growth in Buildings

Abstract There is now widespread acceptance that mould growth in buildings should be avoided as it may lead to adverse health effects. Consequently, it is critically important to have appropriate guidelines that address this issue. As well as reviewing the existing literature with regard to the state of the art of relevant mould-related research, this chapter reports on work aimed at developing mould-related Building Regulation guidance for dwellings in England and Wales. The major findings are, first, that although the factors that influence mould growth are well known, in buildings the variation and interrelationships of and between those are complex and, second, to deal with this complexity there is a fundamental choice between setting specific moisture performance criteria or using a ‘mould model’ to demonstrate compliance with regulations. At present, for England and Wales, the setting of moisture criteria is preferable and this chapter makes relevant suggestions for such criteria.

[1]  A. Nevalainen,et al.  Laboratory studies on the relationship between fungal growth and atmospheric temperature and humidity , 1991 .

[2]  Ruut Hannele Peuhkuri,et al.  Development of an improved model for mould growth: Laboratory and field experiments , 2008 .

[3]  Joseph Andrew Clarke,et al.  A technique for the prediction of the conditions leading to mould growth in buildings , 1999 .

[4]  Ian Ridley,et al.  Condensation risk – impact of improvements to Part L and robust details on Part C Final report: BD2414 , 2011 .

[5]  Godfried Augenbroe,et al.  EVALUATION OF HYGROTHERMAL MODELS FOR MOLD GROWTH AVOIDANCE PREDICTION , 2003 .

[6]  Sung H. Hong,et al.  Vapour pressure excess in living rooms and bedrooms of English dwellings: Analysis of the Warm Front dataset , 2007 .

[7]  G. Ayerst,et al.  The effects of moisture and temperature on growth and spore germination in some fungi. , 1969 .

[8]  A. F. Bravery,et al.  The moisture requirements of moulds isolated from domestic dwellings , 1989 .

[9]  Ian Ridley,et al.  Asthma / dust mite study - Final report: sensitivity of humidity and mould growth to occupier behaviour in dwellings designed to the new air tightness requirements , 2006 .

[10]  Arnold Janssens,et al.  Development of indoor climate classes to assess humidity in dwellings , 2003 .

[11]  Ian Ridley,et al.  Mould and Winter Indoor Relative Humidity in Low Income Households in England , 2006 .

[12]  J. Bonner,et al.  A study of the temperature and humidity requirements of Aspergillus niger. , 1948, Mycologia.

[13]  Tadj Oreszczyn,et al.  Condensation Targeter II: Modelling surface relative humidity to predict mould growth in dwellings , 1999 .

[14]  Jim White,et al.  The Influence of House Characteristics in a Canadian Community on Microbiological Contamination , 1998 .

[15]  Ocg Olaf Adan,et al.  On the fungal defacement of interior finishes , 1994 .

[16]  K. Nielsen,et al.  Mould growth on building materials under low water activities: Influence of humidity and temperature on fungal growth and secondary metabolism , 2004 .

[17]  Rachel Becker.  Condensation and mould growth in dwellings—parametric and field study , 1984 .

[18]  H. Viitanen,et al.  A mathematical model of mould growth on wooden material , 1999, Wood Science and Technology.

[19]  E. Hasselaar,et al.  Housing characteristics predicting mould growth in bathrooms , 2005 .

[20]  Neil J. Rowan,et al.  Prediction of Toxigenic Fungal Growth in Buildings by Using a Novel Modelling System , 1999, Applied and Environmental Microbiology.

[21]  Pentti Kalliokoski,et al.  Fungal growth and survival in building materials under fluctuating moisture and temperature conditions , 2000 .

[22]  R. G. Tomkins.  Studies of the Growth of Moulds.--I , 1929 .

[23]  Ian Ridley,et al.  The Reduction in Air Infiltration due to Window Replacement in UK Dwellings: Results of a Field Study and Telephone Survey , 2005 .