Efficiency of Cs-free materials for negative ion production in H2 and D2 plasmas

High power negative ion sources use caesium to reduce the work function of the converter surface which significantly increases the negative ion yield. Caesium, however, is a very reactive alkali-metal and shows complex redistribution dynamics in consequence of plasma-surface-interaction. Thus, maintaining a stable and homogenous low work function surface is a demanding task, which is not easily compatible with the RAMI issues (reliability, availability, maintainability, inspectability) for a future DEMO fusion reactor. Hence, Cs-free alternative materials for efficient negative ion formation are desirable. At the laboratory experiment HOMER materials which are referred to as promising are investigated under identical and ion source relevant parameters: the refractory metals Ta and W, non-doped and boron-doped diamond as well as materials with inherent low work function (lanthanum-doped molybdenum, MoLa and lanthanum hexaboride, LaB6). The results are compared to the effect of in-situ caesiation, which at HOMER leads to a maximal increase of the negative ion density by a factor of 2.5. Among the examined samples low work function materials are most efficient. In particular, MoLa leads to an increase of almost 50 % compared to pure volume formation. The difference to a caesiated surface can be attributed to the still higher work function of MoLa, which is expected to be slightly below 3 eV. Using deuterium instead of hydrogen leads to increased atomic and positive ion densities, while comparable negative ion densities are achieved. In contrast to the low work function materials, bulk samples of the refractory metals as well as carbon based materials have no enhancing effect on H−, where the latter materials furthermore show severe erosion due to the hydrogen plasma.High power negative ion sources use caesium to reduce the work function of the converter surface which significantly increases the negative ion yield. Caesium, however, is a very reactive alkali-metal and shows complex redistribution dynamics in consequence of plasma-surface-interaction. Thus, maintaining a stable and homogenous low work function surface is a demanding task, which is not easily compatible with the RAMI issues (reliability, availability, maintainability, inspectability) for a future DEMO fusion reactor. Hence, Cs-free alternative materials for efficient negative ion formation are desirable. At the laboratory experiment HOMER materials which are referred to as promising are investigated under identical and ion source relevant parameters: the refractory metals Ta and W, non-doped and boron-doped diamond as well as materials with inherent low work function (lanthanum-doped molybdenum, MoLa and lanthanum hexaboride, LaB6). The results are compared to the effect of in-situ caesiation, which at ...

[1]  U. Fantz,et al.  Influence of H2 and D2 plasmas on the work function of caesiated materials , 2017 .

[2]  U. Fantz,et al.  Investigations on Cs-free alternatives for negative ion formation in a low pressure hydrogen discharge at ion source relevant parameters , 2017 .

[3]  C. Wimmer,et al.  Extraction of negative charges from an ion source: Transition from an electron repelling to an electron attracting plasma close to the extraction surface , 2016 .

[4]  R. Friedl.  Enhancing the accuracy of the Fowler method for monitoring non-constant work functions. , 2016, The Review of scientific instruments.

[5]  C. Wimmer,et al.  Investigation of the boundary layer during the transition from volume to surface dominated H⁻ production at the BATMAN test facility. , 2016, The Review of scientific instruments.

[6]  M. Bacal,et al.  Negative hydrogen ion production mechanisms , 2015 .

[7]  U. Fantz,et al.  Comparison of measured and modelled negative hydrogen ion densities at the ECR-discharge HOMER , 2015 .

[8]  U. Fantz,et al.  Temperature dependence of the work function of caesiated materials under ion source conditions , 2015 .

[9]  U. Fantz,et al.  Investigations on Caesium-free Alternatives for H- Formation at Ion Source Relevant Parameters , 2015 .

[10]  Pravin Kumar,et al.  Negative-ion production on carbon materials in hydrogen plasma: influence of the carbon hybridization state and the hydrogen content on H− yield , 2014 .

[11]  U. Fantz,et al.  Fundamental studies on the Cs dynamics under ion source conditions. , 2014, The Review of scientific instruments.

[12]  U. Fantz,et al.  Development of negative hydrogen ion sources for fusion: Experiments and modelling , 2012 .

[13]  C. Wimmer,et al.  Work function measurements during plasma exposition at conditions relevant in negative ion sources for the ITER neutral beam injection. , 2011, The Review of scientific instruments.

[14]  S. Dietrich,et al.  Application of a collisional radiative model to atomic hydrogen for diagnostic purposes , 2009 .

[15]  H. Kwon,et al.  Surface production of H− ions by backscattering of H+and H+2 ions in the 3–50 eV ion energy range , 2008 .

[16]  O. Delferrière,et al.  Status of the Negative Hydrogen Ion Test Stand at CEA Saclay , 2005 .

[17]  M. Sasao,et al.  Contribution of wall material to the vibrational excitation and negative ion formation in hydrogen negative ion sources (invited) , 2004 .

[18]  D. Reiter,et al.  Collision processes in low-temperature hydrogen plasmas , 2003 .

[19]  Mario Capitelli,et al.  CROSS SECTION DATA FOR ELECTRON-IMPACT INELASTIC PROCESSES OF VIBRATIONALLY EXCITED MOLECULES OF HYDROGEN AND ITS ISOTOPES , 2001 .

[20]  G. Dollinger,et al.  Electron stimulated desorption on diamond (100) as a negative hydrogen source , 1999 .

[21]  U. Fantz,et al.  Spectroscopic diagnostics of the vibrational population in the ground state of and molecules , 1998 .

[22]  P. Wurz,et al.  Hydrogen and oxygen negative ion production by surface ionization using diamond surfaces , 1997 .

[23]  Brian S. Lee,et al.  Surface production of H− ions by hyperthermal hydrogen atoms , 1992 .

[24]  J. W. Stearns,et al.  Operation of a Dudnikov type Penning source with LaB6 cathodes , 1987 .

[25]  K. W. Ehlers,et al.  Effect of wall material on H− production in a multicusp source , 1985 .

[26]  V. Dudnikov,et al.  A powerful injector of neutrals with a surface-plasma source of negative ions , 1974 .