Amorphous Nb2O5 as a Selective and Reusable Catalyst for Furfural Production from Xylose in Biphasic Water and Toluene

Aqueous-phase dehydration of xylose into furfural was studied in the presence of amorphous Nb2O5 with water-compatible Bronsted and Lewis acid sites. Nb2O5 was determined as a more active and selective catalyst for xylose dehydration than typical homogeneous Bronsted and Lewis acid catalysts including HCl and Sc(OTf)3, and Nb2O5 converted 93% of xylose with 48% selectivity toward furfural in water at 393 K. No significant loss of the original catalytic activity was observed after Na+-exchange treatment, which indicates that the reaction proceeded only on Lewis acid sites. Isotope-labeling experiments using D2O and xylose suggested that furfural is formed through stepwise dehydration via a highly reactive dicarbonyl intermediate on Nb2O5, whereas typical Lewis acids such as CrCl3 and Sc(OTf)3 convert xylose to furfural in water through hydride transfer and subsequent dehydration via xylulose as a ketose-type intermediate. The difference in the reaction mechanism accounts for the lower activation energy (83...

[1]  Stephanie G. Wettstein,et al.  Small pore zeolite catalysts for furfural synthesis from xylose and switchgrass in a γ-valerolactone/water solvent , 2016 .

[2]  D. Vlachos,et al.  Reaction Pathways and Intermediates in Selective Ring Opening of Biomass-Derived Heterocyclic Compounds by Iridium , 2016 .

[3]  R. Moreno-Tost,et al.  Gas-phase hydrogenation of furfural to furfuryl alcohol over Cu/ZnO catalysts , 2016 .

[4]  Matthew W. Kanan,et al.  Carbon dioxide utilization via carbonate-promoted C–H carboxylation , 2016, Nature.

[5]  Bing Liu,et al.  Catalytic Conversion of Biomass into Chemicals and Fuels over Magnetic Catalysts , 2016 .

[6]  Michikazu Hara,et al.  Synergistic Catalysis by Lewis Acid and Base Sites on ZrO2 for Meerwein–Ponndorf–Verley Reduction , 2015 .

[7]  F. Pinna,et al.  Effects of synthetic parameters on the catalytic performance of Au/CeO 2 for furfural oxidative esterification , 2015 .

[8]  Michikazu Hara,et al.  Formation of 5-(Hydroxymethyl)furfural by Stepwise Dehydration over TiO2 with Water-Tolerant Lewis Acid Sites , 2015 .

[9]  Nitin Kumar,et al.  A review on biomass energy resources, potential, conversion and policy in India , 2015 .

[10]  C. Chen,et al.  Depolymerization of cellulose to glucose by oxidation–hydrolysis , 2015 .

[11]  J. Beltramini,et al.  Catalytic Conversion of Glucose to 5‐Hydroxymethyl‐furfural with a Phosphated TiO2 Catalyst , 2015 .

[12]  S. Ordóñez,et al.  One-pot aldol condensation and hydrodeoxygenation of biomass-derived carbonyl compounds for biodiesel synthesis. , 2014, ChemSusChem.

[13]  J. Jung,et al.  Solid Lewis acidity of boehmite γ-AlO(OH) and its catalytic activity for transformation of sugars in water , 2014 .

[14]  D. Sholl,et al.  Role of Lewis and Brønsted Acid Sites in the Dehydration of Glycerol over Niobia , 2014 .

[15]  Michikazu Hara,et al.  Selective glucose transformation by titania as a heterogeneous Lewis acid catalyst , 2014 .

[16]  Basudeb Saha,et al.  Advances in 5-hydroxymethylfurfural production from biomass in biphasic solvents , 2014 .

[17]  W. Jong,et al.  Mechanistic and kinetic aspects of pentose dehydration towards furfural in aqueous media employing homogeneous catalysis , 2014 .

[18]  Catherine Pinel,et al.  Conversion of biomass into chemicals over metal catalysts. , 2014, Chemical reviews.

[19]  K. Tomishige,et al.  One-pot selective conversion of furfural into 1,5-pentanediol over a Pd-added Ir–ReOx/SiO2 bifunctional catalyst , 2014 .

[20]  J. Clark,et al.  Direct microwave-assisted hydrothermal depolymerization of cellulose. , 2013, Journal of the American Chemical Society.

[21]  Michikazu Hara,et al.  Titania as an Early Transition Metal Oxide with a High Density of Lewis Acid Sites Workable in Water , 2013 .

[22]  Hirokazu Kobayashi,et al.  Synthesis and utilisation of sugar compounds derived from lignocellulosic biomass , 2013 .

[23]  W. Leitner,et al.  Mechanistic comparison of saccharide depolymerization catalyzed by dicarboxylic acids and glycosidases , 2013 .

[24]  K. Hara,et al.  High-Yielding One-Pot Synthesis of Glucose from Cellulose Using Simple Activated Carbons and Trace Hydrochloric Acid , 2013 .

[25]  Stephanie G. Wettstein,et al.  Conversion of hemicellulose into furfural using solid acid catalysts in γ-valerolactone. , 2013, Angewandte Chemie.

[26]  Q. Xin,et al.  Heterogeneous ceria catalyst with water-tolerant Lewis acidic sites for one-pot synthesis of 1,3-diols via Prins condensation and hydrolysis reactions. , 2013, Journal of the American Chemical Society.

[27]  D. Vlachos,et al.  Conversion of Xylose to Furfural Using Lewis and Brønsted Acid Catalysts in Aqueous Media , 2012 .

[28]  James A. Dumesic,et al.  Production of 5-Hydroxymethylfurfural from Glucose Using a Combination of Lewis and Brønsted Acid Catalysts in Water in a Biphasic Reactor with an Alkylphenol Solvent , 2012 .

[29]  Michael Tsapatsis,et al.  One-Pot Synthesis of 5-(Ethoxymethyl)furfural from Glucose using Sn-BEA and Amberlyst Catalysts , 2012 .

[30]  Jean-Paul Lange,et al.  Furfural--a promising platform for lignocellulosic biofuels. , 2012, ChemSusChem.

[31]  D. Vlachos,et al.  Xylose Isomerization to Xylulose and its Dehydration to Furfural in Aqueous Media , 2011 .

[32]  Kati Vilonen,et al.  Biorefining: heterogeneously catalyzed reactions of carbohydrates for the production of furfural and hydroxymethylfurfural. , 2011, ChemSusChem.

[33]  J. Luong,et al.  Synthesis of furfural from xylose by heterogeneous and reusable nafion catalysts. , 2011, ChemSusChem.

[34]  Yuguang Du,et al.  Tantalum compounds as heterogeneous catalysts for saccharide dehydration to 5-hydroxymethylfurfural. , 2011, Chemical communications.

[35]  Manuel Moliner,et al.  "One-pot" synthesis of 5-(Hydroxymethyl)furfural from carbohydrates using tin-Beta zeolite , 2011 .

[36]  Michikazu Hara,et al.  Nb2O5·nH2O as a heterogeneous catalyst with water-tolerant Lewis acid sites. , 2011, Journal of the American Chemical Society.

[37]  Ronald T. Raines,et al.  Synthesis of furfural from xylose and xylan. , 2010, ChemSusChem.

[38]  Mark Mascal,et al.  Towards the efficient, total glycan utilization of biomass. , 2009, ChemSusChem.

[39]  Regina Palkovits,et al.  Depolymerization of cellulose using solid catalysts in ionic liquids. , 2008, Angewandte Chemie.

[40]  Michikazu Hara,et al.  Hydrolysis of cellulose by amorphous carbon bearing SO3H, COOH, and OH groups. , 2008, Journal of the American Chemical Society.

[41]  V. Papangelakis,et al.  Optimum reactor configuration for prevention of gypsum scaling during continuous sulphuric acid neutralization , 2007 .

[42]  A. Corma,et al.  Chemical routes for the transformation of biomass into chemicals. , 2007, Chemical reviews.

[43]  K. Tanabe Catalytic Application of Niobium Compounds , 2003 .

[44]  S. Okazaki,et al.  VARIOUS REACTIONS CATALYZED BY NIOBIUM COMPOUNDS AND MATERIALS , 1995 .

[45]  Charles M. Cai,et al.  Integrated furfural production as a renewable fuel and chemical platform from lignocellulosic biomass , 2014 .