The Effect of Sandblasting on the Initiation of Stress Corrosion Cracking in Unidirectional E-Glass/Polymer Composites Used in High Voltage Composite (Non-Ceramic) Insulators
暂无分享,去创建一个
[1] Maciej Kumosa,et al. Boron-free fibers for prevention of acid induced brittle fracture of composite insulator GRP rods , 2003 .
[2] Maciej Kumosa,et al. The Stress Corrosion Experiments on an E-Glass/Epoxy Unidirectional Composite , 2000 .
[3] R. Brückner,et al. Structure sensitive measurements on e-glass fibers , 1982 .
[4] Qiong Qiu. Brittle fracture mechanisms of glass-fiber reinforced polymer insulators , 1995 .
[5] Maciej Kumosa,et al. An evaluation of the critical conditions for the initiation of stress corrosion cracking in unidirectional E-glass/polymer composites , 2001 .
[6] Maciej Kumosa,et al. Evaluation of Stress Corrosion Properties of Pultruded Glass Fiber/Polymer Composite Materials , 2001 .
[7] Maciej Kumosa,et al. Corrosion of E-glass fibers in acidic environments , 1997 .
[8] Maciej Kumosa,et al. Brittle Fracture of Non-Ceramic Suspension Insulators with Epoxy Cone End-Fittings , 1997 .
[9] Maciej Kumosa,et al. Chemical analysis of a field-failed composite suspension insulator , 1998 .
[10] Maciej Kumosa,et al. Initiation of Stress Corrosion Cracking in Unidirectional Glass/Polymer Composite Materials , 2001 .
[11] Maciej Kumosa,et al. An investigation of brittle fracture of composite insulator rods in an acid environment with either static or cyclic loading , 2000 .