Single Microdroplet Breakup-Assisted Viscosity Measurement

Recently, with the development of biomedical fields, the viscosity of prepolymer fluids, such as hydrogels, has played an important role in determining the mechanical properties of the extracellular matrix (ECM) or being closely related to cell viability in ECM. The technology for measuring viscosity is also developing. Here, we describe a method that can measure the viscosity of a fluid with trace amounts of prepolymers based on a simple flow-focused microdroplet generator. We also propose an equation that could predict the viscosity of a fluid. The viscosity of the prepolymer was predicted by measuring and calculating various lengths of the disperse phase at the cross junction of two continuous-phase channels and one disperse-phase channel. Bioprepolymer alginates and gelatin methacryloyl (GelMA) were used to measure the viscosity at different concentrations in a microdroplet generator. The break-up length of the dispersed phase at the cross junction of the channel gradually increased with increasing flow rate and viscosity. Additional viscosity analysis was performed to validate the standard viscosity calculation formula depending on the measured length. The viscosity formula derived based on the length of the alginate prepolymer was applied to GelMA. At a continuous phase flow rate of 400 uL/h, the empirical formula of alginate showed an error within about 2%, which was shown to predict the viscosity very well in the viscometer. Results of this study are expected to be very useful for hydrogel tuning in biomedical and tissue regeneration fields by providing a technology that can measure the dynamic viscosity of various prepolymers in a microchannel with small amounts of sample.

[1]  B. Kim,et al.  Advanced Strategies for 3D Bioprinting of Tissue and Organ Analogs Using Alginate Hydrogel Bioinks , 2021, Marine drugs.

[2]  Puxiang Lai,et al.  A low-consumption photoacoustic method to measure liquid viscosity , 2021, Biomedical Optics Express.

[3]  N. Morgan,et al.  Microfluidic Chip Device for In Situ Mixing and Fabrication of Hydrogel Microspheres via Michael-Type Addition. , 2021, Langmuir : the ACS journal of surfaces and colloids.

[4]  Sumana Bhattacharjee,et al.  Design and Fabrication of a Microfluidic System with Nozzle/Diffuser Micropump and Viscosity , 2021, ArXiv.

[5]  C. Dutcher,et al.  Droplet Interfacial Tensions and Phase Transitions Measured in Microfluidic Channels. , 2021, Annual review of physical chemistry.

[6]  A. Panteleyev,et al.  Sodium alginate-based composites as a collagen substitute for skin bioengineering , 2020, Biomedical materials.

[7]  Raymond H. W. Lam,et al.  Microfluidic Viscometer Using a Suspending Micromembrane for Measurement of Biosamples , 2020, Micromachines.

[8]  M. Nazari,et al.  Droplet size prediction in a microfluidic flow focusing device using an adaptive network based fuzzy inference system , 2020, Biomedical Microdevices.

[9]  Pere Miribel-Catala,et al.  An Integrated Detection Method for Flow Viscosity Measurements in Microdevices , 2020, IEEE Transactions on Biomedical Engineering.

[10]  M. Burns,et al.  A droplet-based microfluidic viscometer for the measurement of blood coagulation. , 2020, Biomicrofluidics.

[11]  B. Kandasubramanian,et al.  Review of alginate-based hydrogel bioprinting for application in tissue engineering , 2019, Biofabrication.

[12]  Ning Hu,et al.  3D Bioprinting: from Benches to Translational Applications. , 2019, Small.

[13]  Hossein Hosseinkhani,et al.  Nanomaterials in Advanced Medicine , 2019 .

[14]  R. Rahbarghazi,et al.  Tissue engineering strategies for the induction of angiogenesis using biomaterials , 2018, Journal of biological engineering.

[15]  R. Superfine,et al.  Microfluidic viscometry using magnetically actuated micropost arrays , 2018, PloS one.

[16]  Udayabhanu M. Jammalamadaka,et al.  Recent Advances in Biomaterials for 3D Printing and Tissue Engineering , 2018, Journal of functional biomaterials.

[17]  M. Packirisamy,et al.  3D Suspended Polymeric Microfluidics (SPMF3) with Flow Orthogonal to Bending (FOB) for Fluid Analysis through Kinematic Viscosity , 2017 .

[18]  Hossam Haick,et al.  Advanced Materials for Health Monitoring with Skin‐Based Wearable Devices , 2017, Advanced healthcare materials.

[19]  Randy Deutsch Design and Fabrication , 2017 .

[20]  Murat Guvendiren,et al.  Recent Advances in Bioink Design for 3D Bioprinting of Tissues and Organs , 2017, Front. Bioeng. Biotechnol..

[21]  Jae Young Lee,et al.  Cell-laden 3D bioprinting hydrogel matrix depending on different compositions for soft tissue engineering: Characterization and evaluation. , 2017, Materials science & engineering. C, Materials for biological applications.

[22]  Qing Gao,et al.  Research on the printability of hydrogels in 3D bioprinting , 2016, Scientific Reports.

[23]  M. Mushrush,et al.  A Novel High-Throughput Viscometer. , 2016, ACS combinatorial science.

[24]  Abhishek Sharma,et al.  Rapid and Automated Measurement of Milk Adulteration Using a 3D Printed Optofluidic Microviscometer (OMV) , 2016, IEEE Sensors Journal.

[25]  Adam E Jakus,et al.  Advancing the field of 3D biomaterial printing , 2016, Biomedical materials.

[26]  M. Shokrgozar,et al.  Silk as a potential candidate for bone tissue engineering. , 2015, Journal of controlled release : official journal of the Controlled Release Society.

[27]  Deepak E. Solomon,et al.  Multiplexed microfluidic viscometer for high-throughput complex fluid rheology , 2014 .

[28]  H. Baharvand,et al.  Galactosylated collagen matrix enhanced in vitro maturation of human embryonic stem cell-derived hepatocyte-like cells , 2014, Biotechnology Letters.

[29]  Ali Khademhosseini,et al.  Microfluidics-Assisted Fabrication of Gelatin-Silica Core–Shell Microgels for Injectable Tissue Constructs , 2013, Biomacromolecules.

[30]  H. Pastoriza,et al.  A single channel capillary microviscometer , 2013 .

[31]  J. Chevalier,et al.  Microfluidic on chip viscometers. , 2008, The Review of scientific instruments.

[32]  D. Weitz,et al.  Dripping to jetting transitions in coflowing liquid streams. , 2007, Physical review letters.

[33]  Erich J. Windhab,et al.  Drop formation in a co-flowing ambient fluid , 2004 .