Dependence of crack growth kinetics on dendrite orientation and water chemistry for Alloy 182 weld metal in high-temperature water

[1]  Y. Takeda,et al.  Effects of water chemistry on stress corrosion cracking of 316NG weld metals in high temperature water , 2015 .

[2]  P. Scott.  An Overview of Internal Oxidation as a Possible Explanation of Intergranular Stress Corrosion Cracking of Alloy 600 in PWRS , 2013 .

[3]  C. Fu,et al.  Deterministic Formulation of the Effect of Stress Intensity Factor on PWSCC of Ni-Base Alloys and Weld Metals , 2013 .

[4]  K. Ogawa,et al.  Characterization of microstructure, local deformation and microchemistry in Alloy 600 heat-affected zone and stress corrosion cracking in high temperature water , 2012 .

[5]  C. Fu,et al.  Synergistic effects of local strain-hardening and dissolved oxygen on stress corrosion cracking of 316NG weld heat-affected zones in simulated BWR environments , 2012 .

[6]  Y. Takeda,et al.  Characterization of microstructure and local deformation in 316NG weld heat-affected zone and stress corrosion cracking in high temperature water , 2011 .

[7]  Y. Qiu,et al.  Effect of dissolved hydrogen on the electrochemical behaviour of Alloy 600 in simulated PWR primary water at 290 °C , 2011 .

[8]  Y. Qiu,et al.  Effects of water chemistry and loading conditions on stress corrosion cracking of cold-rolled 316NG stainless steel in high temperature water , 2011 .

[9]  Y. Qiu,et al.  The effect of roll-processing orientation on stress corrosion cracking of warm-rolled 304L stainless steel in oxygenated and deoxygenated high temperature pure water , 2010 .

[10]  T. Shoji,et al.  Formulating stress corrosion cracking growth rates by combination of crack tip mechanics and crack tip oxidation kinetics , 2010 .

[11]  T. Shoji,et al.  Crack Branching and Its Effect on Environmentally Assisted Cracking in High Temperature Water Environments , 2010 .

[12]  Peter L. Andresen,et al.  IGSCC of non-sensitized stainless steels in high temperature water , 2008 .

[13]  Peter L. Andresen,et al.  Effects of Hydrogen on Stress Corrosion Crack Growth Rate of Nickel Alloys in High-Temperature Water , 2008 .

[14]  Y. Takeda,et al.  Effects of loading mode and water chemistry on stress corrosion crack growth behavior of 316L HAZ and weld metal materials in high temperature pure water , 2008 .

[15]  Y. Takeda,et al.  The dependency of the crack growth rate on the loading pattern and temperature in stress corrosion cracking of strain-hardened 316L stainless steels in a simulated BWR environment , 2008 .

[16]  Y. Takeda,et al.  Transient and steady state crack growth kinetics for stress corrosion cracking of a cold worked 316L stainless steel in oxygenated pure water at different temperatures , 2008 .

[17]  C. Fu,et al.  Deterministic Prediction of Stress Corrosion Crack Growth Rates in High Temperature Water by Combination of Interface Oxidation Kinetics and Crack Tip Asymptotic Field , 2008 .

[18]  Y. Takeda,et al.  Effects of Loading Mode and Temperature on Stress Corrosion Crack Growth Rates of a Cold-Worked Type 316L Stainless Steel in Oxygenated Pure Water , 2007 .

[19]  H. Deguchi,et al.  Influence of Dissolved Hydrogen on Structure of Oxide Film on Alloy 600 Formed in Primary Water of Pressurized Water Reactors , 2003 .

[20]  Steven A. Attanasio,et al.  Measurement of the Nickel/Nickel Oxide Transition in Ni-Cr-Fe Alloys and Updated Data and Correlations to Quantify the Effect of Aqueous Hydrogen on Primary Water SCC , 2003 .

[21]  T. Matsunaga,et al.  ICONE11-36056 STRESS CORROSION CRACKING OF CRD STUB TUBE JOINT AND REPAIR AT HAMAOKA UNIT 1 , 2003 .

[22]  F. P. Ford.  Quantitative Prediction of Environmentally Assisted Cracking , 1996 .

[23]  R. Newman.  Developments in the slip-dissolution model of stress corrosion cracking , 1994 .

[24]  Peter L. Andresen,et al.  Life prediction by mechanistic modeling and system monitoring of environmental cracking of iron and nickel alloys in aqueous systems , 1988 .

[25]  P. Andresen.  Observation and Prediction of the Effects of Water Chemistry and Mechanics on Environmentally Assisted Cracking of Inconels 182 Weld Metal and 600 , 1988 .

[26]  C. Briant,et al.  The Microstructural Causes of Intergranular Corrosion of Alloys 82 and 182 , 1987 .

[27]  C. Shih,et al.  Plastic near-tip fields for branched cracks , 1986 .

[28]  E. M. Morozov,et al.  Elastic-plastic fracture mechanics , 1978 .

[29]  V. Vitek,et al.  Plane strain stress intensity factors for branched cracks , 1977, International Journal of Fracture.

[30]  V. Vitek,et al.  A theory of the initiation of creep crack growth , 1977 .