Structural Test and Analysis of a Hybrid Inflatable Antenna

NASA is developing ultra-lightweight structures technology for communication antennas for space missions. One of the research goals is to evaluate the structural characteristics of inflatable and rigidizable antennas through test and analysis. Being able to test and analyze the structural characteristics of a full scale antenna is important to enable the simulation of various mission scenarios to determine system performance in space. Recent work completed to evaluate a Hybrid Inflatable Antenna concept will be discussed. Tests were completed on a 2-m prototype to optimize its static shape and identify its modal dynamics that are important for analytical model validation. These test results were used to evaluate a preliminary finite element model of the antenna, and this model development and correlation activity is also described in the paper.

[1]  James L. Gaspar,et al.  Nonlinear Structural Analysis Methodology and Dynamics Scaling of Inflatable Parabolic Reflector Antenna Concepts , 2007 .

[2]  W. Keith Belvin,et al.  Advances in Structures for Large Space Systems , 2004 .

[3]  John K. Lin,et al.  Advanced Precipitation Radar Antenna Singly Curved Parabolic Antenna Reflector Development , 2003 .

[4]  James Pearson,et al.  Precision Tooling for Membrane Concentrators , 2003 .

[5]  John K. Lin,et al.  A Hybrid Inflatable Dish Antenna System for Spacecraft , 2001 .

[6]  W. Keith Belvin,et al.  Finite-element-analysis model and preliminary ground testing of controls-structures interaction evolutionary model reflector , 1992 .

[7]  M. F. Card,et al.  Large space structures - Fantasies and facts , 1980 .

[8]  G. D. Bilyeu,et al.  Initial '80s Development of Inflated Antennas , 1983 .

[9]  Robert Engberg,et al.  Modal Survey Test of the SOTV 2X3 Meter Off-Axis Inflatable Concentrator , 2000 .

[10]  Thomas G. Campbell,et al.  The development of the 15-Meter Hoop Column deployable antenna system with structural and electromagnetic performance results , 1986 .

[11]  G. R. Veal,et al.  In step inflatable antenna description , 1995 .

[12]  S Pappa Richard,et al.  Structural Dynamics Experimental Activities in Ultra-Lightweight and Inflatable Space Structures , 2001 .

[13]  J. S. Archer,et al.  High-Performance Parabolic Antenna Reflectors , 1980 .

[14]  Gyula Greschik,et al.  APPROXIMATING PARABOLOIDS WITH AXISYMMETRIC PRESSURIZED MEMBRANES , 1998 .

[15]  J. Paxton,et al.  Material property effects on thin film solar concentrator for solar thermal propulsion , 1994 .

[16]  Yuli Huang,et al.  DESIGN TOOL FOR INFLATABLE SPACE STRUCTURES , 1997 .

[17]  J. Hedgepeth.  Critical requirements for the design of large space structures , 1981 .

[18]  Richard S. Pappa,et al.  Development of Modal Test Techniques for Validation of a Solar Sail Design , 2004 .

[19]  L. Anderson,et al.  Reflector surface deviations in large parabolic antennas , 1963 .

[20]  S. Milliken.  The development of high gain deployable antennas for communication satellites , 1966 .

[21]  James Moore,et al.  Design Optimization of Thin Film Solar Concentrators Using Non-Linear Deflection Modeling , 2001 .

[22]  Stuart Robson,et al.  Photogrammetry Methodology Development for Gossamer Spacecraft Structures , 2002 .

[23]  Clark W. Hawk,et al.  Material-Property Effects on a Thin-Film Solar Concentrator , 1995 .

[24]  John Hedgepeth.  Interaction between an inflated lenticular reflector and its rim support , 1995 .

[25]  W. Rusch.  The current state of the reflector antenna art , 1984 .

[26]  Dean M. Lester,et al.  Near term in-space demonstration of an inflatable concentrator , 1999 .

[27]  Harlan D. Mills.  Large Space Structures , 1966 .

[28]  D. Benton.  Thermal control of large spacecraft antenna reflectors , 1984 .

[29]  James D. Moore,et al.  EVALUATION OF CATENARY SUSPENSION FOR REDUCING SHAPE ERRORS IN INFLATED SOLAR CONCENTRATORS , 1998 .