Optimization of Flow Distribution by Topological Description and Machine Learning in Solution Growth of SiC

The macroscopic distribution of fluid flows, which affect the quality of final products for various kinds of materials, is often difficult to describe in mathematical formulae and hinders the implementation of empirical knowledge in scaling up. In the present study, the characteristics of the flow distribution in silicon carbide (SiC) solution growth are described by using the position of the saddle point and the solution growth conditions are optimized by computational fluid dynamics simulation, machine learning, and a genetic algorithm. As a result, the candidates of the optimal condition for the solution growth of 6‐in. SiC crystals are successfully obtained from the empirical knowledge gained from 3‐in. crystal growth, by adding the topological description to the objective function. The present design of the objective function using the topological description can possibly be applied to other crystal growth or materials processing problems and to overcome scale‐up difficulties, which can facilitate the rapid development of functional materials such as SiC wafers for power device applications.

[1]  D. Chaussende,et al.  A sessile drop approach for studying 4H-SiC/liquid silicon high-temperature interface reconstructions , 2022, Journal of Materials Science.

[2]  S. Maruyama,et al.  Direct Visualization of Kinetic Reversibility of Crystallization and Dissolution Behavior at Solution Growth Interface of SiC in Si-Cr Solvent , 2021, Surfaces and Interfaces.

[3]  M. Tagawa,et al.  Numerical Investigation of Solute Evaporation in Crystal Growth from Solution: A Case Study of SiC Growth by TSSG Method , 2021, Journal of Crystal Growth.

[4]  H. Shibata,et al.  Suppressing solvent compositional change during solution growth of SiC using SiC/C gradient crucible , 2021, Journal of Crystal Growth.

[5]  Tomohisa Kato,et al.  Reduction of threading screw dislocations in 4H-SiC crystals by a hybrid method with solution growth and physical vapor transport growth , 2021 .

[6]  Stephan Hoyer,et al.  Machine learning–accelerated computational fluid dynamics , 2021, Proceedings of the National Academy of Sciences.

[7]  H. Shibata,et al.  Availability of Cr-rich Cr-Si solvent for rapid solution growth of 4H-SiC , 2020 .

[8]  Lei Wang,et al.  Optimal Control of SiC Crystal Growth in the RF-TSSG System Using Reinforcement Learning , 2020, Crystals.

[9]  Yue Yu,et al.  Influence of silicon melt convection on interface instability in large-size silicon carbide solution growth , 2019 .

[10]  Sun-Young Park,et al.  Effect of Hot-zone Aperture on the Growth Behavior of SiC Single Crystal Produced via Top-seeded Solution Growth Method , 2019 .

[11]  Jan Winkler,et al.  Fast forecasting of VGF crystal growth process by dynamic neural networks , 2019, Journal of Crystal Growth.

[12]  Myung-Hyun Lee,et al.  Effects of the Temperature Gradient Near the Crystal‐Melt Interface in Top Seeded Solution Growth of SiC Crystal , 2018 .

[13]  S. Kawanishi,et al.  Mechanism of Replicating 4H-SiC Polytype during Solution Growth on Concave Surface , 2018 .

[14]  V. Kalaev,et al.  Numerical investigation of the effect of shape change in graphite crucible during top-seeded solution growth of SiC , 2017 .

[15]  S. Dost,et al.  Numerical investigation of the transport phenomena occurring in the growth of SiC by the induction heating TSSG method , 2017 .

[16]  Martin Holena,et al.  Optimization of magnetically driven directional solidification of silicon using artificial neural networks and Gaussian process models , 2017 .

[17]  S. Dost,et al.  Global simulation of the induction heating TSSG process of SiC for the effects of Marangoni convection, free surface deformation and seed rotation , 2017 .

[18]  M. Tagawa,et al.  Conversion Behavior of Threading Screw Dislocations on C Face with Different Surface Morphology During 4H-SiC Solution Growth , 2016 .

[19]  D. Chaussende,et al.  Analysis of Macrostep Formation during Top Seeded Solution Growth of 4H-SiC , 2016 .

[20]  K. Kamei,et al.  Solution Growth on Concave Surface of 4H-SiC Crystal , 2016 .

[21]  H. Okumura,et al.  Effect of aluminum addition on the surface step morphology of 4H–SiC grown from Si–Cr–C solution , 2015 .

[22]  M. Tagawa,et al.  Different behavior of threading edge dislocation conversion during the solution growth of 4H–SiC depending on the Burgers vector , 2014 .

[23]  K. Kamei,et al.  Top-seeded solution growth of three-inch-diameter 4H-SiC using convection control technique , 2014 .

[24]  M. Tagawa,et al.  Evolution of threading screw dislocation conversion during solution growth of 4H-SiC , 2013 .

[25]  M. Tagawa,et al.  Influence of Solution Flow on Step Bunching in Solution Growth of SiC Crystals , 2013 .

[26]  Alexander,et al.  Polytype Transformation by Replication of Stacking Faults Formed by Two-Dimensional Nucleation on Spiral Steps during SiC Solution Growth , 2012 .

[27]  Ling Wang,et al.  A hybrid genetic algorithm-neural network strategy for simulation optimization , 2005, Appl. Math. Comput..

[28]  Kalyanmoy Deb,et al.  A fast and elitist multiobjective genetic algorithm: NSGA-II , 2002, IEEE Trans. Evol. Comput..

[29]  Y. Jaluria.  Fluid Flow Phenomena in Materials Processing—The 2000 Freeman Scholar Lecture , 2001 .

[30]  Tomohisa Kato,et al.  Massive reduction of threading screw dislocations in 4H-SiC crystals grown by a hybrid method combined with solution growth and physical vapor transport growth on higher off-angle substrates , 2021 .

[31]  D. Birchall,et al.  Computational Fluid Dynamics , 2020, Radial Flow Turbocompressors.

[32]  Ulrich Hirsch,et al.  Introduction to the Geometry of Foliations, Part A , 1981 .