Laser metal deposition of TiC/Inconel 718 composites with tailored interfacial microstructures

[1]  Tribological behavior of inconel 718 in sodium cooled reactor environments , 1976 .

[2]  P. Threadgill,et al.  PROGRESS IN JOINING OF ADVANCED MATERIALS , 1991 .

[3]  M. Aksoy,et al.  The effect of strong carbide-forming elements such as Mo, Ti, V and Nb on the microstructure of ferritic stainless steel , 1998 .

[4]  Yunliu Yang,et al.  High temperature creep behavior of in-situ TiC particulate reinforced Fe–Cr–Ni matrix composite , 2000 .

[5]  Noboru Kikuchi,et al.  Closed loop direct metal deposition : art to part , 2000 .

[6]  H. Goldenstein,et al.  Solidification of high speed steels , 2001 .

[7]  J. Llorca.  Fatigue of particle-and whisker-reinforced metal-matrix composites , 2002 .

[8]  Andrew J. Pinkerton,et al.  Multiple-layer cladding of stainless steel using a high-powered diode laser: An experimental investigation of the process characteristics and material , 2004 .

[9]  Jing Liang,et al.  Microstructures of laser-deposited Ti–6Al–4V , 2004 .

[10]  Lin Yang,et al.  Laser direct manufacturing of tungsten nickel collimation component , 2004 .

[11]  Lin Li,et al.  Effects of wire feeding direction and location in multiple layer diode laser direct metal deposition , 2005 .

[12]  J. Choi,et al.  Characteristics of laser aided direct metal/material deposition process for tool steel , 2005 .

[13]  R. Poprawe,et al.  Qualifizieren des Laserstrahl-Auftragschweißens von BLISKs aus Nickel- und Titanbasislegierungen , 2006 .

[14]  Kenneth C. Mills,et al.  Review of surface tension data for metallic elements and alloys: Part 1 – Pure metals , 2006 .

[15]  A. Nath,et al.  Investigating laser rapid manufacturing for Inconel-625 components , 2007 .

[16]  Xinhua Wu,et al.  A review of laser fabrication of metallic engineering components and of materials , 2007 .

[17]  J. Moya,et al.  The challenge of ceramic/metal microcomposites and nanocomposites , 2007 .

[18]  Peter Loosen,et al.  The future of high power laser techniques , 2007, International Symposium on High Power Laser Systems and Applications.

[19]  Robert P. Mudge,et al.  Laser engineered net shaping advances additive manufacturing and repair , 2007 .

[20]  Zhu Liu,et al.  Improving corrosion and wear performance of HVOF-sprayed Inconel 625 and WC-Inconel 625 coatings by high power diode laser treatments , 2007 .

[21]  Sie Chin Tjong,et al.  Novel Nanoparticle‐Reinforced Metal Matrix Composites with Enhanced Mechanical Properties , 2007 .

[22]  Yifu Shen,et al.  Direct laser sintered WC-10Co/Cu nanocomposites , 2008 .

[23]  I. R. Pashby,et al.  Microstructure formation in Waspaloy multilayer builds following direct metal deposition with laser and wire , 2008 .

[24]  Weidong Huang,et al.  Study on microstructure and mechanical properties of laser rapid forming Inconel 718 , 2008 .

[25]  Weidong Huang,et al.  Composition control for laser solid forming from blended elemental powders , 2009 .

[26]  J. Mazumder,et al.  Laser aided direct metal deposition of Inconel 625 superalloy: Microstructural evolution and thermal stability , 2009 .

[27]  M. Preuss,et al.  Crystallographic texture and microstructure of pulsed diode laser-deposited Waspaloy , 2009 .

[28]  Yifu Shen,et al.  Effects of processing parameters on consolidation and microstructure of W–Cu components by DMLS , 2009 .

[29]  Sundeep Gopagoni,et al.  Microstructure Evolution in Laser Deposited Nickel-Titanium-Carbon in situ Metal Matrix Composite , 2010 .

[30]  Vamsi Krishna Balla,et al.  Laser processing of SiC-particle-reinforced coating on titanium , 2010 .

[31]  H. M. Wang,et al.  Microstructure and mechanical properties of rapid directionally solidified Ni-base superalloy Rene′41 by laser melting deposition manufacturing , 2010 .

[32]  Bengt Lennartson,et al.  Increased stability in laser metal wire deposition through feedback from optical measurements , 2010 .

[33]  Minlin Zhong,et al.  Laser surface cladding: The state of the art and challenges , 2010 .

[34]  Baolong Zheng,et al.  The Influence of Ni-Coated TiC on Laser-Deposited IN625 Metal Matrix Composites , 2010 .

[35]  D. Zuo,et al.  Hot corrosion behaviour of low Al NiCoCrAlY cladded coatings reinforced by nano-particles on a Ni-base super alloy , 2010 .

[36]  M. Brandt,et al.  Direct metal deposition (DMD) of H13 tool steel on copper alloy substrate: evaluation of mechanical properties , 2011 .

[37]  Sandip Bysakh,et al.  Microstructure, mechanical and wear properties of laser processed SiC particle reinforced coatings on titanium , 2011 .

[38]  R. Moat,et al.  A comparative study of laser direct metal deposition characteristics using gas and plasma-atomized Ti–6Al–4V powders , 2011 .

[39]  Jingchao Sun,et al.  Characterization of (TiB + TiC)/TC4 in situ titanium matrix composites prepared by laser direct deposition , 2011 .

[40]  A. K. Dasgupta,et al.  Microstructure evolution during laser-aided direct metal deposition of alloy tool steel , 2011 .

[41]  M. Preuss,et al.  Residual stresses in laser direct metal deposited Waspaloy , 2011 .

[42]  Weidong Huang,et al.  Microstructure and residual stress of laser rapid formed Inconel 718 nickel-base superalloy , 2011 .

[43]  S. Sankaré,et al.  Influence of powder characteristics in laser direct metal deposition of SS316L for metallic parts manufacturing , 2012 .

[44]  Reinhart Poprawe,et al.  Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium , 2012 .

[45]  Rui-di Li,et al.  Development and characterization of laser surface cladding (Ti,W)C reinforced Ni–30Cu alloy composite coating on copper , 2012 .

[47]  Dichen Li,et al.  The influence of laser and powder defocusing characteristics on the surface quality in laser direct metal deposition , 2012 .

[48]  R. Poprawe,et al.  Laser additive manufacturing of metallic components: materials, processes and mechanisms , 2012 .

[49]  Xiaoyan Zeng,et al.  Control of shape and performance for direct laser fabrication of precision large-scale metal parts with 316L Stainless Steel , 2013 .

[50]  Remy Fabbro,et al.  Influence of various process conditions on surface finishes induced by the direct metal deposition laser technique on a Ti-6Al-4V alloy , 2013 .

[51]  Weidong Huang,et al.  Effect of overlap rate on recrystallization behaviors of Laser Solid Formed Inconel 718 superalloy , 2013 .