CFD Simulation of Gas–Liquid–Liquid Three-Phase Flow in an Annular Centrifugal Contactor

A computational fluid dynamics (CFD) simulation of gas–liquid–liquid three-phase flow was carried out on an annular centrifugal contactor. An Euler–Euler, volume-of-fluid, multiphase-flow model was used for the three-phase flow simulation. The three-phase flow behaviors in the open and sealed inlet operation modes were investigated under various operating conditions. The location and morphology of the aqueous/organic interface were discussed in detail in light of the simulated pressure distribution. An interesting bistability phenomenon was observed in the simulation. The throughput of the annular centrifugal contactor was obtained from the simulation under various phase ratios and compared with experimental results. Excellent agreement was obtained, supporting the validity of the simulation method.

[1]  Expansion of a two-dimensional foam , 2002 .

[2]  Ralph A. Leonard,et al.  A SPREADSHEET ALGORITHM FOR STAGEWISE SOLVENT EXTRACTION , 1994 .

[3]  Ralph A. Leonard,et al.  Flow over circular weirs in a centrifugal field , 1980 .

[4]  G. Tryggvason,et al.  A front-tracking method for viscous, incompressible, multi-fluid flows , 1992 .

[5]  Ross E. Swaney,et al.  CFD Simulation of the Separation Zone of an Annular Centrifugal Contactor , 2009 .

[6]  Wuhua Duan,et al.  Development and Performance of a New Annular Centrifugal Contactor for Semi‐Industrial Scale , 2005 .

[7]  R. Boom,et al.  Lattice Boltzmann simulations of droplet formation in a T-shaped microchannel. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[8]  Jing Chen,et al.  APPLICATION OF MINIATURE CENTRIFUGAL CONTACTORS FOR TREATING HIGH-LEVEL LIQUID WASTE , 2001 .

[9]  Ross E. Swaney,et al.  Computational Fluid Dynamics (CFD) Study of the Flow in an Annular Centrifugal Contactor , 2006 .

[10]  Wuhua Duan,et al.  Extraction of Caffeine with Annular Centrifugal Contactors , 2006 .

[11]  Ross E. Swaney,et al.  Free surface flow in the mixing zone of an annular centrifugal contactor , 2008 .

[12]  Hans-Jörg Bart,et al.  Coupling of CFD with DPBM for an RDC extractor , 2009 .

[13]  Ralph A. Leonard,et al.  Recent Advances in Centrifugal Contactor Design , 1988 .

[14]  Hans-Jörg Bart,et al.  Droplet population balance modelling—hydrodynamics and mass transfer , 2006 .

[15]  Anna C Balazs,et al.  Periodic droplet formation in chemically patterned microchannels. , 2003, Physical review letters.

[16]  L. Yeo,et al.  Film drainage between two surfactant-coated drops colliding at constant approach velocity. , 2003, Journal of colloid and interface science.

[17]  Qisu Zou,et al.  Centrifugal Contactors: Separation of an Aqueous and an Organic Stream in the Rotor Zone (LA‐UR‐05‐7800) , 2006 .

[18]  Kent E. Wardle,et al.  Open-Source CFD Simulations of Liquid–Liquid Flow in the Annular Centrifugal Contactor , 2011 .

[19]  Wuhua Duan,et al.  Extraction of Hydrocortisone from the Fermentation Liquor with Annular Centrifugal Contactors , 2006 .

[20]  Jyeshtharaj B. Joshi,et al.  Residence Time Distribution and Flow Patterns in the Single-Phase Annular Region of Annular Centrifugal Extractor , 2009 .

[21]  J. Sethian,et al.  Fronts propagating with curvature-dependent speed: algorithms based on Hamilton-Jacobi formulations , 1988 .

[22]  Wuhua Duan,et al.  Application of annular centrifugal contactors in the extraction flowsheet for producing high purity yttrium , 2007 .

[23]  Jyeshtharaj B. Joshi,et al.  Flow Visualization and Three-Dimensional CFD Simulation of the Annular Region of an Annular Centrifugal Extractor , 2008 .

[24]  Jiazhen Zhou,et al.  Development of a ϕ20 mm annular centrifugal contactor for the hot test of the total TRPO process , 2009 .

[25]  Ralph A. Leonard,et al.  Liquid‐Liquid dispersion in turbulent couette flow , 1981 .

[26]  Jianchen Wang,et al.  Application of 70-mm-dia Centrifugal Contactors in Pilot Plant Tests of Two Simplified TRPO Processes with Simulated High Level Waste , 2009 .

[27]  Robin Shandas,et al.  Computational fluid dynamics analysis of microbubble formation in microfluidic flow-focusing devices , 2007 .

[28]  Liang-Shih Fan,et al.  Experiment and lattice Boltzmann simulation of two-phase gas–liquid flows in microchannels , 2007 .

[29]  G. J. Bernstein,et al.  A High-Capacity Annular Centrifugal Contactor , 1973 .

[30]  Ross E. Swaney,et al.  Analysis of the effect of mixing vane geometry on the flow in an annular centrifugal contactor , 2009 .

[31]  D. B. Chamberlain,et al.  Centrifugal Contactors for Laboratory-Scale Solvent Extraction Tests , 1995 .

[32]  Mario De Menech.  Modeling of droplet breakup in a microfluidic T-shaped junction with a phase-field model , 2006 .

[33]  Jianchen Wang,et al.  Application of φ70 mm Centrifugal Contactors in a Pilot Test of the Total Partitioning Process Using Simulated High‐Level Waste , 2008 .

[34]  Mitsuhiro Ohta,et al.  Numerical analysis of a single drop formation process under pressure pulse condition , 1995 .

[35]  Hans-Jörg Bart,et al.  Numerical solution of the bivariate population balance equation for the interacting hydrodynamics and mass transfer in liquid¿liquid extraction columns , 2006 .

[36]  S. Osher,et al.  A level set approach for computing solutions to incompressible two-phase flow , 1994 .

[37]  Ralph A. Leonard.  Use of Electronic Worksheets for Calculation of Stagewise Solvent Extraction Processes , 1987 .

[38]  Jyeshtharaj B. Joshi,et al.  Computational Flow Modeling and Visualization in the Annular Region of Annular Centrifugal Extractor , 2007 .