Numerical modelling of impulse wave generated by fast landslides

The damage caused by impulse waves generated in water bodies by fast landslides can be very high in terms of human lives and economic losses. The complex phenomena taking place in this highly unsteady process are difficult to model because three interacting phases: air, water and soil are involved. Solutions currently available are based on either closed form equations supported experimentally or the depth integrated Navier–Stokes equations. The latter, although of more general applicability, requires knowledge of the evolution of the bathimetry and slide drag forces and their applicability may be restricted by the steep slopes existing in most real cases. To avoid these limitations, the authors propose the solution of the full Navier–Stokes equations, using indicator functions to assign the material properties to each spatial point in the domain. The method performance is illustrated by comparison against the experimental results obtained in a physical model of an actual case. Copyright © 2004 John Wiley & Sons, Ltd.

[1]  Erik G. Thompson,et al.  Use of pseudo‐concentrations to follow creeping viscous flows during transient analysis , 1986 .

[2]  S. Osher,et al.  A level set approach for computing solutions to incompressible two-phase flow , 1994 .

[3]  T. Belytschko,et al.  An Extended Finite Element Method for Two-Phase Fluids , 2003 .

[4]  S. Osher,et al.  Computing interface motion in compressible gas dynamics , 1992 .

[5]  S. Osher,et al.  A Non-oscillatory Eulerian Approach to Interfaces in Multimaterial Flows (the Ghost Fluid Method) , 1999 .

[6]  Djamel Lakehal,et al.  Interface tracking towards the direct simulation of heat and mass transfer in multiphase flows , 2002 .

[7]  M. Jaeger,et al.  NUMERICAL SIMULATION OF INCOMPRESSIBLE FLOWS WITH MOVING INTERFACES , 1997 .

[8]  Richard M. Iverson,et al.  Flow of variably fluidized granular masses across three‐dimensional terrain: 1. Coulomb mixture theory , 2001 .

[9]  R. Codina.  Comparison of some finite element methods for solving the diffusion-convection-reaction equation , 1998 .

[10]  Asif Usmani,et al.  Efficient mould filling simulation in castings by an explicit finite element method , 1995 .

[11]  F. Brezzi.  On the existence, uniqueness and approximation of saddle-point problems arising from lagrangian multipliers , 1974 .

[12]  I. Babuska.  The finite element method with Lagrangian multipliers , 1973 .

[13]  M. Quecedo,et al.  Application of the level set method to the finite element solution of two-phase flows , 2001 .

[14]  C. Ling,et al.  Granular-Flow Rheology: Role of Shear-Rate Number in Transition Regime , 1996 .