Agglomeration and breakage of nanoparticles in stirred media mills : a comparison of different methods and models

Abstract The increasing industrial demand for nanoparticles challenges the application of stirred media mills to grind in the sub-micron size range. It was shown recently [ Mende et al., 2003 . Mechanical production and stabilization of submicron particles in stirred media mills. Powder Technology 132, 64–73] that the grinding behavior of particles in the sub-micron size range in stirred media mills and the minimum achievable particle size is strongly influenced by the suspension stability and thus the agglomeration behavior of the suspension. Therefore, an appropriate modeling of the process must include a superposition of the two opposing processes in the mill i.e., breakage and agglomeration which can be done by means of population balance models. Modeling must now include the influence of colloidal surface forces and hydrodynamic forces on particle aggregation and breakup. The superposition of the population balance models for agglomeration and grinding with the appropriate kernels leads to a system of partial differential equations, which can be solved in various ways numerically. Here a modified h-p Galerkin algorithm which is implemented in the commercially available software package PARSIVAL developed by CiT (CiT GmbH, Rastede, Germany) and the moment methodology according to [ Diemer and Olsen, 2002a . A moment methodology for coagulation and breakage problems: Part I—analytical solution of the steady-state population balance. Chemical Engineering Science 57 (12), 2193–2209; Diemer and Olsen, 2002b . A moment methodology for coagulation and breakage problems: Part II—moment models and distribution reconstruction. Chemical Engineering Science 57 (12), 2211–2288] are used and compared to explicit data on alumina. This includes a comparison of the derived particle size distributions, moments and its accuracy depending on the starting particle size distribution and the used agglomeration and breakage kernels. Finally, the computational effort of both methods in comparison to the prior mentioned parameters is evaluated in terms of practical application.

[1]  Leonard G. Austin,et al.  Kinetics of fine wet grinding in a laboratory ball mill , 2001 .

[2]  É. Schaer,et al.  Study of silica particle aggregation in a batch agitated vessel , 2001 .

[3]  Jörg Schwedes,et al.  Mechanical production and stabilization of submicron particles in stirred media mills , 2003 .

[4]  John A. Dodds,et al.  Modelling fine grinding in a fluidized bed opposed jet mill: Part II: Continuous grinding , 1999 .

[5]  Vanni,et al.  Approximate Population Balance Equations for Aggregation-Breakage Processes. , 2000, Journal of colloid and interface science.

[6]  Michael J. Hounslow,et al.  Growth and aggregation rates for calcite and calcium oxalate monohydrate , 1999 .

[7]  J. H. Olson,et al.  A moment methodology for coagulation and breakage problems: Part 1—analytical solution of the steady-state population balance , 2002 .

[8]  R. Diemer,et al.  A moment methodology for coagulation and breakage problems: Part 2 Moment models and distribution reconstruction , 2002 .

[9]  Ulrich Nieken,et al.  Modeling and simulation of crystallization processes using parsival , 2001 .

[10]  R. Hogg,et al.  Investigation of the grind limit in stirred-media milling , 1996 .

[11]  P. C. Kapur,et al.  Self-preserving size spectra of comminuted particles , 1972 .

[12]  S. Kaliaguine,et al.  Alumina trihydrate crystallization. Part 2. A model of agglomeration , 1976 .

[13]  M. Wulkow,et al.  The simulation of molecular weight distributions in polyreaction kinetics by discrete Galerkin methods , 1996 .

[14]  Benjamin Epstein,et al.  Logarithmico-Normal Distribution in Breakage of Solids , 1948 .

[15]  M. Hounslow,et al.  A discretized population balance for nucleation, growth, and aggregation , 1988 .

[16]  M. Hounslow,et al.  Adjustable discretized population balance for growth and aggregation , 1995 .

[17]  V. Oles.  Shear-induced aggregation and breakup of polystyrene latex particles , 1992 .

[18]  H. Berthiaux,et al.  Modelling fine grinding in a fluidized bed opposed jet mill: Part I: Batch grinding kinetics , 1999 .

[19]  Patrick T. Spicer,et al.  Coagulation and fragmentation: Universal steady‐state particle‐size distribution , 1996 .

[20]  Frank Müller,et al.  From the product and process requirements to the milling facility , 1999 .

[21]  C. Frances,et al.  Fine wet grinding of an alumina hydrate in a ball mill , 1998 .

[22]  J. D. Boadway.  Dynamics of Growth and Breakage of Alum Floc in Presence of Fluid Shear , 1978 .

[23]  D. Ramkrishna,et al.  On the solution of population balance equations by discretization—II. A moving pivot technique , 1996 .

[24]  P. Somasundaran,et al.  Modeling flocculation of colloidal mineral suspensions using population balances , 2003 .

[25]  H.J.C. Gommeren,et al.  Modelling and control of a jet mill plant , 2000 .

[26]  Michael Frenklach,et al.  Aerosol dynamics modeling using the method of moments , 1987 .