Core and panel types affect the mechanical properties and failure modes of the wood-based XX-type lattice sandwich structure

[1]  Lifeng Wang,et al.  Compression behaviour of the wood-based X-type lattice sandwich structure , 2020 .

[2]  Yingcheng Hu,et al.  Short beam shear properties and failure modes of the wood-based X-type lattice sandwich structure , 2020, Journal of Forestry Research.

[3]  Yingcheng Hu,et al.  Mechanical properties of the wood-based X-type lattice sandwich structure , 2020 .

[4]  Yingcheng Hu,et al.  Compressive behavior and failure modes of the wood-based double X-type lattice sandwich structure , 2020 .

[5]  Yingcheng Hu,et al.  Core configuration and panel reinforcement affect compression properties of wood-based 2-D straight column lattice truss sandwich structure , 2019, European Journal of Wood and Wood Products.

[6]  M. Irle,et al.  Wood-based litter in poultry production: a review , 2019, World's Poultry Science Journal.

[7]  C. Brischke,et al.  Performance of wood in the Franja partisan hospital , 2019 .

[8]  E. Bonnin,et al.  Advanced recycling of post-consumer solid wood and MDF , 2019 .

[9]  S. Hedjazi,et al.  Exploring the potential of milkweed stalk in wood plastic manufacture , 2019 .

[10]  B. Wang,et al.  Design and Compressive Behavior of a Photosensitive Resin-Based 2-D Lattice Structure with Variable Cross-Section Core , 2019, Polymers.

[11]  Jie Liu,et al.  On sound insulation of pyramidal lattice sandwich structure , 2018, Composite Structures.

[12]  Yingcheng Hu,et al.  Optimization and compressive behavior of composite 2-D lattice structure , 2018, Mechanics of Advanced Materials and Structures.

[13]  Dongxia Yang,et al.  Compression behaviors of wood-based lattice sandwich structures , 2018, BioResources.

[14]  Li Ma,et al.  Mechanical properties and failure behavior of the sandwich structures with carbon fiber-reinforced X-type lattice truss core , 2018 .

[15]  Dan Rosu,et al.  Epoxy and succinic anhydride functionalized soybean oil for wood protection against UV light action , 2016 .

[16]  Li Ma,et al.  High temperature indentation behaviors of carbon fiber composite pyramidal truss structures , 2015 .

[17]  Yingcheng Hu,et al.  Compressive and bending behaviours of wood-based two-dimensional lattice truss core sandwich structures , 2015 .

[18]  Lin-zhi Wu,et al.  Mechanical behavior of carbon fiber reinforced polymer composite sandwich panels with 2-D lattice truss cores , 2014 .

[19]  A. Manalo.  Behaviour of fibre composite sandwich structures under short and asymmetrical beam shear tests , 2013 .

[20]  Lin-zhi Wu,et al.  Hybrid truss concepts for carbon fiber composite pyramidal lattice structures , 2012 .

[21]  Lin-zhi Wu,et al.  Low-velocity impact characteristics and residual tensile strength of carbon fiber composite lattice core sandwich structures , 2011 .

[22]  S. Tu,et al.  Numerical modelling and nanoindentation experiment to study the brazed residual stresses in an X-type lattice truss sandwich structure , 2011 .

[23]  Lin-zhi Wu,et al.  Experimental investigation of 3D sandwich structure with core reinforced by composite columns , 2010 .

[24]  Ajit K. Roy,et al.  Micromechanics model for three-dimensional open-cell foams using a tetrakaidecahedral unit cell and Castigliano's second theorem , 2003 .

[25]  Anthony G. Evans,et al.  Lightweight Materials and Structures , 2001 .

[26]  M. Ashby,et al.  Effective properties of the octet-truss lattice material , 2001 .

[27]  M. Ashby,et al.  FOAM TOPOLOGY BENDING VERSUS STRETCHING DOMINATED ARCHITECTURES , 2001 .

[28]  Michael F. Ashby,et al.  Drivers for material development in the 21st century , 2001 .

[29]  M. Ashby,et al.  The topological design of multifunctional cellular metals , 2001 .