Cement substitution by a combination of metakaolin and limestone

This study investigates the coupled substitution of metakaolin and limestone in Portland cement (PC). The mechanical properties were studied in mortars and the microstructural development in pastes by X-ray diffraction, thermogravimetry analysis, mercury intrusion porosimetry and isothermal calorimetry. We show that 45% of substitution by 30% of metakaolin and 15% of limestone gives better mechanical properties at 7 and 28 days than the 100% PC reference. Our results show that calcium carbonate reacts with alumina from the metakaolin, forming supplementary AFm phases and stabilizing ettringite. Using simple mass balance calculations derived from thermogravimetry results, we also present the thermodynamic simulation for the system, which agrees fairly well with the experimental observations. It is shown that gypsum addition should be carefully balanced when using calcined clays because it considerably influences the early age strength by controlling the very rapid reaction of aluminates.

[1]  J. Marchand,et al.  Solvent Replacement Studies of Hydrated Portland Cement Systems: The Role of Calcium Hydroxide , 1998 .

[2]  M. F. Carrasco,et al.  Strength Optimization of "Tailor-Made Cement" with Limestone Filler and Blast Furnace Slag , 2005 .

[3]  W. McWhinnie,et al.  The solid state chemistry of metakaolin-blended ordinary Portland cement , 2000 .

[4]  G. Saoût,et al.  Hydration mechanisms of ternary Portland cements containing limestone powder and fly ash , 2011 .

[5]  E. F. Irassar,et al.  Strength development of ternary blended cement with limestone filler and blast-furnace slag , 2003 .

[6]  Duncan Herfort,et al.  Thermodynamics and cement science , 2011 .

[7]  M. Murat,et al.  Hydration reaction and hardening of calcined clays and related minerals III. Influence of calcination process of kaolinite on mechanical strengths of hardened metakaolinite , 1983 .

[8]  G. Saoût,et al.  Influence of limestone on the hydration of Portland cements , 2008 .

[9]  Emil Makovicky,et al.  Pozzolanic reactions of six principal clay minerals: Activation, reactivity assessments and technological effects , 1995 .

[10]  P. Souza,et al.  Viability of using calcined clays, from industrial by-products, as pozzolans of high reactivity , 2005 .

[11]  Dmitrii A. Kulik,et al.  Aqueous Solubility Diagrams for Cementitious Waste Stabilization Systems: II, End‐Member Stoichiometries of Ideal Calcium Silicate Hydrate Solid Solutions , 2001 .

[12]  B. Lothenbach,et al.  Supplementary cementitious materials , 2011 .

[13]  Y. Yue,et al.  Physical performances of blended cements containing calcium aluminosilicate glass powder and limestone , 2011 .

[14]  R. Fischer,et al.  Reinvestigation of the system C4A.nH2O C4A.Co2.nH2O , 1982 .

[15]  B. Lothenbach,et al.  The Role of Calcium Carbonate in Cement Hydration , 2007 .

[16]  B. Marsh,et al.  Pozzolanic and cementitious reactions of fly ash in blended cement pastes , 1988 .

[17]  I. Richardson,et al.  Composition and structure of C–S–H in white Portland cement–20% metakaolin pastes hydrated at 25 °C , 2007 .

[18]  Said Kenai,et al.  Mechanical properties and durability of mortar and concrete containing natural pozzolana and limestone blended cements , 2007 .

[19]  Karen Scrivener,et al.  The origin of the pozzolanic activity of calcined clay minerals: A comparison between kaolinite, illite and montmorillonite , 2011 .

[20]  Ahmed Loukili,et al.  Improvement of the early-age reactivity of fly ash and blast furnace slag cementitious systems using limestone filler , 2011 .

[21]  J. Bai,et al.  Metakaolin and calcined clays as pozzolans for concrete: a review , 2001 .