Effect of grain size on the microstructure and mechanical properties of friction stir welded non-combustive magnesium alloys

[1]  B. Carlson,et al.  Effect of texture on the mechanical behavior of ultrafine grained magnesium alloy , 2011 .

[2]  Zhili Feng,et al.  Influence of thermo-mechanical parameters on texture and tensile behavior of friction stir processed Mg alloy , 2010 .

[3]  H. Somekawa,et al.  Texture and mechanical properties of superplastically deformed magnesium alloy rod , 2010 .

[4]  H. Imai,et al.  Microstructure and mechanical properties of hot extruded Mg-Al-Mn-Ca alloy produced by rapid solidification powder metallurgy , 2010 .

[5]  H. Imai,et al.  Microstructures and Mechanical Responses of Powder Metallurgy Noncombustive Magnesium Extruded Alloy by Rapid Solidification Process in Mass Production , 2010 .

[6]  N. Tsuji,et al.  Effect of initial grain size on the joint properties of friction stir welded aluminum , 2009 .

[7]  H. Kokawa,et al.  Grain structure evolution during friction-stir welding of AZ31 magnesium alloy , 2009 .

[8]  V. Balasubramanian,et al.  Selection of FSW tool pin profile, shoulder diameter and material for joining AZ31B magnesium alloy – An experimental approach , 2009 .

[9]  K. Nakata,et al.  Effect of Dispersed Intermetallic Particles on Microstructural Evolution in the Friction Stir Weld of a Fine-Grained Magnesium Alloy , 2009 .

[10]  K. Nakata,et al.  Microstructural modification and mechanical property improvement in friction stir zone of thixo-molded AE42 Mg alloy , 2009 .

[11]  T. Langdon,et al.  Principles of grain refinement and superplastic flow in magnesium alloys processed by ECAP , 2009 .

[12]  T. Kakiuchi,et al.  High Cycle Fatigue Property of Extruded Non-Combustible Mg Alloy AMCa602 , 2008 .

[13]  K. Nogi,et al.  Fullerene/A5083 composites fabricated by material flow during friction stir processing , 2007 .

[14]  J. C. Huang,et al.  The role of twinning and untwinning in yielding behavior in hot-extruded Mg–Al–Zn alloy , 2007 .

[15]  K. Maruyama,et al.  Microstructural evolution of a heat-resistant magnesium alloy due to friction stir welding , 2005 .

[16]  Yutaka S. Sato,et al.  Effect of micro-texture on fracture location in friction stir weld of Mg alloy AZ61 during tensile test , 2003 .

[17]  W. Kim,et al.  Texture development and its effect on mechanical properties of an AZ61 Mg alloy fabricated by equal channel angular pressing , 2003 .

[18]  Yutaka S. Sato,et al.  Basal plane texture and flow pattern in friction stir weld of a magnesium alloy , 2003 .

[19]  T. Mukai,et al.  Ductility enhancement in AZ31 magnesium alloy by controlling its grain structure , 2001 .

[20]  G. Gottstein,et al.  Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK60 , 2001 .

[21]  F. J. Humphreys,et al.  Recrystallization and Related Annealing Phenomena , 1995 .

[22]  Jean-Eric Masse,et al.  Friction stir welding of AZ31 magnesium alloy rolled sheets: Influence of processing parameters , 2009 .

[23]  N. Tsuji,et al.  Friction stir welding of ultrafine grained interstitial free steels , 2006 .

[24]  Yutaka S. Sato,et al.  Friction stir welding of ultrafine grained Al alloy 1100 produced by accumulative roll-bonding , 2004 .