论文信息 - Quasi-static hybrid position/force control of a flexible manipulator

Quasi-static hybrid position/force control of a flexible manipulator

A method is proposed whereby both the contact force exerted by a flexible manipulator and the position of the end effector while in contact with a surface are controlled. Exact dynamic equations for joint angles, vibration of the flexible link, and constraint force are derived by means of Hamilton's principle. A controller for the hybrid position/force control of the flexible manipulator is designed on the basis of the obtained model. A set of experiments for the hybrid control of the flexible manipulator using a force sensor has been carried out. Several experimental results are shown.<<ETX>>

[1] Fumitoshi Matsuno,et al. A simple model of flexible manipulators with six axes and vibration control by using accelerometers , 1990, J. Field Robotics.

[2] Bruno Siciliano,et al. A Singular Perturbation Approach to Control of Lightweight Flexible Manipulators , 1988, Int. J. Robotics Res..

[3] Mohsen Shahinpoor,et al. Dynamic stability analysis of a one-link force-controlled flexible manipulator , 1988, J. Field Robotics.

[4] N. H. McClamroch,et al. Feedback stabilization and tracking of constrained robots , 1988 .

[5] T. Fukuda. Flexibility control of elastic robotic arms , 1985 .

[6] Eduardo Bayo,et al. Inverse Dynamics and Kinematics of Multi- Link Elastic Robots: An Iterative Frequency Domain Approach , 1989, Int. J. Robotics Res..

[7] Toshio Fukuda,et al. Flexibility control of elastic robotic arms and its application to contouring control , 1984, ICRA.

[8] Tsuneo Yoshikawa,et al. Dynamic hybrid position/force control of robot manipulators--Description of hand constraints and calculation of joint driving force , 1986, IEEE Journal on Robotics and Automation.