Dynamic analysis of lunar lander during soft landing using explicit finite element method

Abstract In this paper, the soft-landing analysis of a lunar lander spacecraft under three loading case was carried out in ABAQUS, using the Explicit Finite Element method. To ensure the simulation result's accuracy and reliability, the energy and mass balance criteria of the model was presented along with the theory and calculation method, and the results were benchmarked with other software (LS-DYNA) to get a validated model. The results from three loading case showed that the energy and mass of the models were conserved during soft landing, which satisfies the energy and mass balance criteria. The overloading response, structure steady state, and the crushing stroke of this lunar lander all met the design requirements of the lunar lander. The buffer energy-absorbing properties in this model have a good energy-absorbing capability, in which up to 84% of the initial energy could be dissipated. The design parameters of the model could guide the design of future manned landers or larger lunar landers.

[1]  H. W. Leonard,et al.  Dynamic model investigation of touchdown stability of lunar-landing vehicles , 1967 .

[2]  C. T. Wu,et al.  Three-dimensional concrete impact and penetration simulations using the smoothed particle Galerkin method , 2017 .

[3]  T. Belytschko,et al.  A uniform strain hexahedron and quadrilateral with orthogonal hourglass control , 1981 .

[4]  Ming Xiao,et al.  Explicit Dynamic DDA Method considering Dynamic Contact Force , 2016 .

[5]  P. Schlatter,et al.  Impact simulation and optimisation of elastic fuel tanks reinforced with exoskeleton for aerospace applications , 2017 .

[7]  Ravi Prakash,et al.  Verification and Validation of the Mars Science Laboratory/Curiosity Rover Entry, Descent, and Landing System , 2014 .

[8]  Zeng Fuming,et al.  Nonlinear finite element modeling and simulation for landing leg of lunar lander , 2013 .

[9]  Dong-Young Rew,et al.  Control system design of the Korean lunar lander demonstrator , 2014 .

[10]  Jinwu Xiang,et al.  A novel aircraft energy absorption strut system with corrugated composite plate to improve crashworthiness , 2018 .

[11]  M. S. Grahne,et al.  Development and evaluation of the mars pathfinder inflatable airbag landing system , 2002 .

[12]  Masahiro Nohmi,et al.  Modeling for Lunar Lander by Mechanical Dynamics Software , 2005 .

[13]  Chen Tianzhi.  Overview of Lunar Lander Soft Landing Dynamic Modeling and Analysis , 2011 .

[14]  Prus Cerzary.  Impact simulation of elastic fuel tanks reinforced with exoskeleton for aerospace applications , 2015 .

[15]  Rongqiang Liu,et al.  Touchdown dynamic modeling and simulation of lunar lander , 2010, 2010 3rd International Symposium on Systems and Control in Aeronautics and Astronautics.

[16]  W. F. Rogers.  Apollo experience report: Lunar module landing gear subsystem , 1972 .

[17]  Jinbao Chen,et al.  Modeling and Simulation of Lunar Lander Soft-Landing Using Transient Dynamics Approach , 2010, 2010 International Conference on Computational and Information Sciences.

[18]  Wang Jiajun,et al.  Performance optimization of lunar lander based on response surface methodology , 2014 .

[19]  T. Laursen,et al.  Contact—impact modeling in explicit transient dynamics , 2000 .

[20]  Ulrich Gabbert,et al.  Dynamic-explicit finite element simulation of complex problems in civil engineering by parallel computing , 1996 .