A novel approach based on ALE and delamination fracture mechanics for multilayered composite beams

Abstract A novel approach able to predict debonding or fracture phenomena in multilayered composite beams is proposed. The structural model is based on the first-order shear deformable laminated beam theory and moving mesh strategy developed in the framework of Arbitrary Lagrangian–Eulerian (ALE) formulation. The former is utilized to evaluate fracture parameters by using a multilayer approach, in which a low number of interface elements are introduced along the thickness, whereas the latter is utilized to reproduce crack tip motion due to the crack extension produced by moving boundaries. The model is able to avoid computational complexities introduced by an explicit crack representation in bi-dimensional structures, in which typically high computational efforts are expected for handling moving boundaries. To this aim, a moving mesh strategy is proposed for the first time in the context of beam modeling based on a multilayered configuration. Such an approach, essentially based on ALE formulation, is able to reproduce interfacial crack paths by using a low number of computational elements. The numerical method is proposed in the framework of the finite element formulation for a quasi-static or dynamic evolution of the crack tip front. In order to investigate the accuracy and to validate the proposed methodology, comparisons with experimental data and existing formulations available from the literature are developed. Moreover, a parametric study in the framework of dynamic fracture is developed to investigate the capability of the proposed model to reproduce more complex loading cases.

[1]  Krishnaswa Ravi-Chandar,et al.  Experimental Challenges in the Investigation of Dynamic Fracture of Brittle Materials , 2001 .

[2]  Domenico Bruno,et al.  Computation of Energy Release Rate and Mode Separation in Delaminated Composite Plates by Using Plate and Interface Variables , 2005 .

[3]  Hamouine Abdelmadjid,et al.  A state-of-the-art review of the X-FEM for computational fracture mechanics , 2009 .

[4]  E. Barbero,et al.  Interlaminar Damage Model for Polymer Matrix Composites , 2003 .

[5]  Domenico Bruno,et al.  A coupled interface-multilayer approach for mixed mode delamination and contact analysis in laminated composites , 2003 .

[6]  Domenico Bruno,et al.  A fracture-ALE formulation to predict dynamic debonding in FRP strengthened concrete beams , 2013 .

[7]  F. L. Matthews,et al.  Predicting Progressive Delamination of Composite Material Specimens via Interface Elements , 1999 .

[8]  Horacio Dante Espinosa,et al.  Mechanical characterization of materials at small length scales , 2012 .

[9]  F. Greco,et al.  Mixed mode dynamic delamination in fiber reinforced composites , 2009 .

[10]  De Xie,et al.  Calculation of transient strain energy release rates under impact loading based on the virtual crack closure technique , 2007 .

[11]  Paolo Lonetti,et al.  Dynamic propagation phenomena of multiple delaminations in composite structures , 2010 .

[12]  P. Camanho,et al.  Numerical Simulation of Mixed-Mode Progressive Delamination in Composite Materials , 2003 .

[13]  Oded Rabinovitch,et al.  Cohesive Interface Modeling of Debonding Failure in FRP Strengthened Beams , 2008 .

[14]  P. Feraboli,et al.  A crack length control scheme for solving nonlinear finite element equations in stable and unstable delamination propagation analysis , 2014 .

[15]  Domenico Bruno,et al.  Dynamic Mode I and Mode II Crack Propagation in Fiber Reinforced Composites , 2009 .

[16]  Marc Duflot,et al.  Meshless methods: A review and computer implementation aspects , 2008, Math. Comput. Simul..

[17]  Jr. J. Crews,et al.  Mixed-Mode Bending Method for Delamination Testing , 1990 .

[18]  L. Lorenzis,et al.  Coupled mixed-mode cohesive zone modeling of interfacial debonding in simply supported plated beams , 2013 .

[19]  Lorenzo Leonetti,et al.  Mixed-mode fracture in lightweight aggregate concrete by using a moving mesh approach within a multiscale framework , 2015 .

[20]  Bhushan Lal Karihaloo,et al.  Improving the accuracy of XFEM crack tip fields using higher order quadrature and statically admissible stress recovery , 2006 .

[21]  Raffaele Zinno,et al.  An analytical delamination model for laminated plates including bridging effects , 2002 .

[22]  R. Luciano,et al.  A theoretical and numerical stability analysis for composite micro-structures by using homogenization theory , 2011 .

[23]  E. Barbero.  Introduction to Composite Materials Design , 1998 .

[24]  Lorenzo Iannucci,et al.  Dynamic delamination modelling using interface elements , 2006 .

[25]  I. Sattari-far,et al.  Finite Element Simulation of Dynamic Crack Propagation for Complex Geometries Without Remeshing , 2006 .

[26]  John H. Crews,et al.  The mixed-mode bending method for delamination testing , 1989 .

[27]  S. Rahman,et al.  An enriched meshless method for non‐linear fracture mechanics , 2004 .

[28]  Oded Rabinovitch,et al.  Debonding analysis of fiber-reinforced-polymer strengthened beams : Cohesive zone modeling versus a linear elastic fracture mechanics approach , 2008 .

[29]  I. Iordanoff,et al.  Using the discrete element method to simulate brittle fracture in the indentation of a silica glass with a blunt indenter , 2013 .

[30]  Antonio Huerta,et al.  Arbitrary Lagrangian–Eulerian (ALE) formulation for hyperelastoplasticity , 2002 .

[31]  Horacio Dante Espinosa,et al.  Modeling dynamic crack propagation in fiber reinforced composites including frictional effects , 2003 .

[32]  Ronald C. Averill,et al.  A mesh-independent interface technology for simulation of mixed-mode delamination growth , 2004 .

[33]  Michael Ortiz,et al.  Quasicontinuum simulation of fracture at the atomic scale , 1998 .

[34]  M. Aliabadi,et al.  Decomposition of the mixed-mode J-integral—revisited , 1998 .

[35]  Domenico Bruno,et al.  Influence of micro-cracking and contact on the effective properties of composite materials , 2008, Simul. Model. Pract. Theory.