Characterization of Potential Exposures to Nanoparticles and Fibers during Manufacturing and Recycling of Carbon Nanotube Reinforced Polypropylene Composites.

Carbon nanotube (CNT) polymer composites are widely used as raw materials in multiple industries because of their excellent properties. This expansion, however, is accompanied by realistic concerns over potential release of CNTs and associated nanoparticles during the manufacturing, recycling, use, and disposal of CNT composite products. Such data continue to be limited, especially with regards to post-processing of CNT-enabled products, recycling and handling of nanowaste, and end-of-life disposal. This study investigated for the first time airborne nanoparticle and fibers exposures during injection molding and recycling of CNT polypropylene composites (CNT-PP) relative to that of PP. Exposure characterization focused on source emissions during loading, melting, molding, grinding, and recycling of scrap material over 20 cycles and included real-time characterization of total particle number concentration and size distribution, nanoparticle and fiber morphology, and fiber concentrations near the operator. Total airborne nanoparticle concentration emitted during loading, melting, molding, and grinding of CNT-PP had geometric mean ranging from 1.2 × 10(3) to 4.3 × 10(5) particles cm(-3), with the highest exposures being up to 2.9 and 300.7 times above the background for injection molding and grinding, respectively. Most of these emissions were similar to PP synthesis. Melting and molding of CNT-PP and PP produced exclusively nanoparticles. Grinding of CNT-PP but not PP generated larger particles with encapsulated CNTs, particles with CNT extrusions, and respirable fiber (up to 0.2 fibers cm(-3)). No free CNTs were found in any of the processes. The number of recycling runs had no significant impact on exposures. Further research into the chemical composition of the emitted nanoparticles is warranted. In the meanwhile, exposure controls should be instituted during processing and recycling of CNT-PP.

[1]  Y. Liu,et al.  Understanding the toxicity of carbon nanotubes. , 2013, Accounts of chemical research.

[2]  Chris Keen,et al.  Airborne emissions of carcinogens and respiratory sensitizers during thermal processing of plastics. , 2013, The Annals of occupational hygiene.

[3]  A. Hart,et al.  Exposure to nanoscale particles and fibers during machining of hybrid advanced composites containing carbon nanotubes , 2009 .

[4]  Jae Hong Park,et al.  Evaluation of airborne particle emissions from commercial products containing carbon nanotubes , 2012, Journal of Nanoparticle Research.

[5]  Per Axel Clausen,et al.  Long, needle-like carbon nanotubes and asbestos activate the NLRP3 inflammasome through a similar mechanism. , 2011, ACS nano.

[6]  Zaiping Guo,et al.  Preparation and characterization of spinel Li4Ti5O12 nanoparticles anode materials for lithium ion battery , 2012, Journal of Nanoparticle Research.

[7]  Wendel Wohlleben,et al.  Release characteristics of selected carbon nanotube polymer composites , 2014 .

[8]  B. van Ravenzwaay,et al.  Inhalation toxicity of multiwall carbon nanotubes in rats exposed for 3 months. , 2009, Toxicological sciences : an official journal of the Society of Toxicology.

[9]  Alexei P. Sokolov,et al.  Microscopic Mechanism of reinforcement in single-wall carbon nanotube/polypropylene nanocomposite , 2005 .

[10]  C. Santeufemio,et al.  Characterization of Exposures To Nanoscale Particles and Fibers During Solid Core Drilling of Hybrid Carbon Nanotube Advanced Composites , 2010, International journal of occupational and environmental health.

[11]  Kathryn M. Butler,et al.  Thermal and flammability properties of polypropylene/carbon nanotube nanocomposites , 2004 .

[12]  Martin Mohr,et al.  Oxidative stress and inflammation response after nanoparticle exposure: differences between human lung cell monocultures and an advanced three-dimensional model of the human epithelial airways , 2010, Journal of The Royal Society Interface.

[13]  Christof Asbach,et al.  Nanoparticle exposure at nanotechnology workplaces: A review , 2011, Particle and Fibre Toxicology.

[14]  Jose Maria Kenny,et al.  Thermal and mechanical properties of single-walled carbon nanotubes–polypropylene composites prepared by melt processing , 2005 .

[15]  Emmanuel Flahaut,et al.  Double-walled carbon nanotubes trigger IL-1β release in human monocytes through Nlrp3 inflammasome activation. , 2012, Nanomedicine : nanotechnology, biology, and medicine.

[16]  Dhimiter Bello,et al.  Biological oxidative damage by carbon nanotubes: Fingerprint or footprint? , 2012, Nanotoxicology.

[17]  Dhimiter Bello,et al.  Screening for Oxidative Stress Elicited by Engineered Nanomaterials: Evaluation of Acellular DCFH Assay , 2012, Dose-response : a publication of International Hormesis Society.

[18]  Peihua Wangyang,et al.  Roles of Ag in fabricating Si nanowires by the electroless chemical etching technique , 2012, Journal of Nanoparticle Research.

[19]  M. Shafer,et al.  Physicochemical and morphological characterisation of nanoparticles from photocopiers: implications for environmental health , 2013, Nanotoxicology.

[20]  Dominique Fleury,et al.  Identification of the main exposure scenarios in the production of CNT-polymer nanocomposites by melt-moulding process , 2013 .

[21]  W. Wohlleben,et al.  On the lifecycle of nanocomposites: comparing released fragments and their in-vivo hazards from three release mechanisms and four nanocomposites. , 2011, Small.

[22]  Suryasarathi Bose,et al.  Carbon Nanotube Based Composites- A Review , 2005 .

[23]  Frank Nüesch,et al.  Release of carbon nanotubes from an epoxy-based nanocomposite during an abrasion process. , 2012, Environmental science & technology.

[24]  Philip Demokritou,et al.  Screening for oxidative damage by engineered nanomaterials: a comparative evaluation of FRAS and DCFH , 2014, Journal of Nanoparticle Research.

[25]  L. Cena,et al.  Characterization and Control of Airborne Particles Emitted During Production of Epoxy/Carbon Nanotube Nanocomposites , 2011, Journal of occupational and environmental hygiene.

[26]  Peter Wick,et al.  A comparison of acute and long-term effects of industrial multiwalled carbon nanotubes on human lung and immune cells in vitro. , 2011, Toxicology letters.

[27]  Mark D. Hoover,et al.  Identification and Characterization of Potential Sources of Worker Exposure to Carbon Nanofibers During Polymer Composite Laboratory Operations , 2007, Journal of occupational and environmental hygiene.

[28]  S. Garantziotis,et al.  Inflammasome activation in airway epithelial cells after multi-walled carbon nanotube exposure mediates a profibrotic response in lung fibroblasts , 2014, Particle and Fibre Toxicology.

[29]  C. Geraci,et al.  Evaluation of the Potential Airborne Release of Carbon Nanofibers During the Preparation, Grinding, and Cutting of Epoxy-Based Nanocomposite Material , 2012, Journal of occupational and environmental hygiene.

[30]  Dhimiter Bello,et al.  Mapping the biological oxidative damage of engineered nanomaterials. , 2013, Small.

[31]  M. Schubauer-Berigan,et al.  Occupational exposure assessment in carbon nanotube and nanofiber primary and secondary manufacturers: mobile direct-reading sampling. , 2013, The Annals of occupational hygiene.

[32]  W. Stark,et al.  The degree and kind of agglomeration affect carbon nanotube cytotoxicity. , 2007, Toxicology letters.

[33]  F. Tardif,et al.  Release-ability of nano fillers from different nanomaterials (toward the acceptability of nanoproduct) , 2011, Journal of Nanoparticle Research.

[34]  K. Saito,et al.  Potential release of carbon nanotubes from their composites during grinding , 2013 .

[35]  P. Borm,et al.  Testing Strategies to Establish the Safety of Nanomaterials: Conclusions of an ECETOC Workshop , 2007, Inhalation toxicology.

[36]  T. Peijs,et al.  Effect of melting and crystallization on the conductive network in conductive polymer composites , 2009 .