Anisotropic surface properties of micro/nanostructured a-C:H:F thin films with self-assembly applications

The singular properties of hydrogenated amorphous carbon (a-C:H) thin films deposited by pulsed DC plasma enhanced chemical vapor deposition (PECVD), such as hardness and wear resistance, make it suitable as protective coating with low surface energy for self-assembly applications. In this paper, we designed fluorine-containing a-C:H (a-C:H:F) nanostructured surfaces and we characterized them for self-assembly applications. Sub-micron patterns were generated on silicon through laser lithography while contact angle measurements, nanotribometer, atomic force microscopy (AFM), and scanning electron microscopy (SEM) were used to characterize the surface. a-C:H:F properties on lithographied surfaces such as hydrophobicity and friction were improved with the proper relative quantity of CH4 and CHF3 during deposition, resulting in ultrahydrophobic samples and low friction coefficients. Furthermore, these properties were enhanced along the direction of the lithography patterns (in-plane anisotropy). Finally, self...

[1]  J. Robertson.  Diamond-like amorphous carbon , 2002 .

[2]  C Van Hoof,et al.  Self-assembly from milli- to nanoscales: methods and applications , 2009, Journal of micromechanics and microengineering : structures, devices, and systems.

[3]  Ching-Ping Wong,et al.  Superhydrophobicity on two-tier rough surfaces fabricated by controlled growth of aligned carbon nanotube arrays coated with fluorocarbon. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[4]  R. Hauert.  An overview on the tribological behavior of diamond-like carbon in technical and medical applications , 2004 .

[5]  Enric Bertran,et al.  Influence of incident ion beam angle on dry etching of silica sub-micron particles deposited on Si substrates , 2009 .

[6]  Michael Newton,et al.  Progess in superhydrophobic surface development. , 2008, Soft matter.

[7]  Enric Bertran,et al.  Plasma parameters of pulsed-dc discharges in methane used to deposit diamondlike carbon films , 2009 .

[8]  J. Yeomans,et al.  Anisotropic drop morphologies on corrugated surfaces. , 2008, Langmuir : the ACS journal of surfaces and colloids.

[9]  A. Hieke,et al.  Variation of the wettability of DLC-coatings by network modification using silicon and oxygen , 1998 .

[10]  Enric Bertran,et al.  Tribological Properties of Fluorinated Amorphous Carbon Thin Films , 2011 .

[11]  Enric Bertran,et al.  Surface structuring of diamond-like carbon films by colloidal lithography with silica sub-micron particles , 2010 .

[12]  R. Hauert.  A review of modified DLC coatings for biological applications , 2003 .

[13]  Rui F. Silva,et al.  Mechanical properties evaluation of fluor-doped diamond-like carbon coatings by nanoindentation , 2004 .

[14]  Hala Zreiqat,et al.  DLC coatings: effects of physical and chemical properties on biological response. , 2007, Biomaterials.

[15]  Alfred Grill,et al.  Diamond-like carbon coatings as biocompatible materials—an overview , 2003 .

[16]  K. Komvopoulos,et al.  Scale-dependent nanomechanical behavior and anisotropic friction of nanotextured silicon surfaces , 2009 .

[17]  Sarah Kim,et al.  Nanomachining by colloidal lithography. , 2006, Small.

[18]  F. Richter,et al.  Comparative experimental analysis of the a-C:H deposition processes using CH4 and C2H2 as precursors , 2007 .

[19]  Enric Bertran,et al.  Effects of environmental conditions on fluorinated diamond-like carbon tribology , 2009 .

[20]  J. Robertson,et al.  Is stress necessary to stabilise sp3 bonding in diamond-like carbon? , 2002 .

[21]  Enric Bertran,et al.  Modifying surface properties of diamond-like carbon films via nanotexturing , 2011 .

[22]  R. K. Roy,et al.  Biomedical applications of diamond-like carbon coatings: a review. , 2007, Journal of biomedical materials research. Part B, Applied biomaterials.

[23]  M. Roy.  Surface Properties of Hard Fluorinated Amorphous Carbon Films Deposited by Pulsed-DC Discharges , 2010 .

[24]  Neelesh A Patankar,et al.  Anisotropy in the wetting of rough surfaces. , 2005, Journal of colloid and interface science.