Integrated characterization of wormhole growth and propagation dynamics in CHOPS reservoirs with a unified and consistent ensemble-based framework

[1]  Daoyong Yang,et al.  Integrated Optimization of Hybrid Steam-Solvent Processes in A Post-CHOPS Reservoir with Consideration of Wormhole Networks , 2022, Journal of Energy Resources Technology.

[2]  Daoyong Yang,et al.  Integrated characterization of wormhole network by use of a modified pressure-gradient-based (PGB) sand failure criterion and ensemble-based history matching during CHOPS processes , 2021, Journal of Petroleum Science and Engineering.

[3]  Daoyong Yang,et al.  Performance Evaluation of Hybrid Steam-Solvent Processes in a Post-CHOPS Reservoir With Consideration of Wormhole Network , 2021, Journal of Energy Resources Technology.

[4]  Daoyong Yang,et al.  A modified pressure-gradient-based (PGB) sand failure criterion for dynamically and preferentially characterizing wormhole growth and propagation during CHOPS processes , 2020 .

[5]  J. Leung,et al.  A Sand-Arch Stability Constrained Dynamic Fractal Wormhole Growth Model for Simulating Cold Heavy-Oil Production with Sand , 2020 .

[6]  Daoyong Yang,et al.  Characterization of Multiphase Flow in CHOPS Processes Using a Systematic Framework , 2020 .

[7]  Daoyong Yang,et al.  Quantification of gas exsolution of alkane solvents-CO2 mixture in heavy oil with consideration of individual interfacial resistance under nonequilibrium conditions , 2019, Journal of Petroleum Science and Engineering.

[8]  Daoyong Yang,et al.  Quantification of Sand Production Using a Pressure-Gradient-Based Sand-Failure Criterion , 2019, SPE Journal.

[9]  Xiaoli Li,et al.  Estimation of Relative Permeability and Capillary Pressure for PUNQ-S3 Model Using a Modified Iterative Ensemble Smoother , 2018, Journal of Energy Resources Technology.

[10]  Daoyong Yang,et al.  Experimental and Theoretical Quantification of Nonequilibrium Phase Behavior and Physical Properties of Foamy Oil Under Reservoir Conditions , 2017 .

[11]  Yin Zhang,et al.  Estimation of Three-Phase Relative Permeabilities for a Water-Alternating-Gas Process by Use of an Improved Ensemble Randomized Maximum-Likelihood Algorithm , 2016 .

[12]  Xiaodong Luo,et al.  An Ensemble 4D Seismic History Matching Framework with Sparse Representation Based on Wavelet Multiresolution Analysis , 2016, 1603.04577.

[13]  Daoyong Yang,et al.  A damped iterative EnKF method to estimate relative permeability and capillary pressure for tight formations from displacement experiments , 2016 .

[14]  I. Gates,et al.  Modelling of Cold Heavy Oil Production with Sand (CHOPS) using a fluidized sand algorithm , 2015 .

[15]  I. Gates,et al.  Well/Wormhole Model of Cold Heavy-Oil Production With Sand , 2014 .

[16]  A. Shokri,et al.  Modelling of Cold Heavy-Oil Production With Sand For Subsequent Thermal/Solvent Injection Applications , 2014 .

[17]  Ergun Kuru,et al.  Sand on Demand: A Laboratory Investigation on Improving Productivity in Horizontal Wells Under Heavy-Oil Primary Production--Part II , 2012 .

[18]  Dean S. Oliver,et al.  An Iterative EnKF for Strongly Nonlinear Systems , 2012 .

[19]  Dean S. Oliver,et al.  An Iterative Ensemble Kalman Filter for Multiphase Fluid Flow Data Assimilation , 2007 .

[20]  Wade T. Crow,et al.  Impact of Incorrect Model Error Assumptions on the Sequential Assimilation of Remotely Sensed Surface Soil Moisture , 2006 .

[21]  Alireza Nouri,et al.  A comparison of two sanding criteria in physical and numerical modeling of sand production , 2006 .

[22]  Bernard Tremblay,et al.  Modelling of Sand Transport Through Wormholes , 2005 .

[23]  M. Dusseault,et al.  Sand-Production Simulation in Heavy-Oil Reservoirs , 2004 .

[24]  B. Tremblay,et al.  Modeling of Wormhole Growth in Cold Production , 2003 .

[25]  Brij B. Maini,et al.  Foamy-Oil Flow , 2001 .

[26]  B. Tremblay,et al.  Modelling Wormhole Flow in Cold Production , 2000 .

[27]  R. E. Hayes,et al.  Critical Review of Foamy Oil Flow , 1999 .

[28]  A. Nur,et al.  Critical porosity; a key to relating physical properties to porosity in rocks , 1998 .

[29]  B. Tremblay,et al.  Modelling of Sand Production From Wells On Primary Recovery , 1998 .

[30]  Bernard Tremblay,et al.  Simulation of Cold Production in Heavy-Oil Reservoirs: Wormhole Dynamics , 1997 .

[31]  R. Kuhlemeyer,et al.  Oil Sand Strength Parameters At Low Effective Stress: Its Effects On Sand Production , 1994 .

[32]  Hemanta Kumar Sarma,et al.  Significance of Foamy-oil Behaviour In Primary Production of Heavy Oils , 1993 .

[33]  Gerald E. Smith,et al.  Fluid flow and sand production in heavy-oil reservoirs under solution-gas drive , 1988 .

[34]  Kelly Alexander Woolsey,et al.  Improving Progressing-Cavity-Pump Performance Through Automation and Surveillance , 2012 .

[35]  D. Oliver,et al.  Ensemble Randomized Maximum Likelihood Method as an Iterative Ensemble Smoother , 2011, Mathematical Geosciences.

[36]  S. McDougall,et al.  Pore-scale modelling of the effect of viscous pressure gradients during heavy oil depletion experiments , 2009 .

[37]  M. Dusseault,et al.  How much oil you can get from CHOPS , 2004 .

[38]  T. Tan,et al.  A New Methodology for Modelling of Sand Wormholes in Field Scale Thermal Simulation , 2003 .

[39]  Y. Wang,et al.  Simulating Cold Heavy Oil Production With Sand by Reservoir-Wormhole Model , 2002 .

[40]  R. Wong.  Sand Production in Oil Sand Under Heavy Oil Foamy Flow Waxy Mixtures , 2002 .

[41]  Daoyong Yang,et al.  Quantification of gas exsolution and preferential diffusion for alkane solvent(s)–CO2–heavy oil systems under nonequilibrium conditions , 2022 .