Development of a wireless stress/strain measurement system integrated with pressure-sensitive nickel powder-filled cement-based sensors

Abstract A wireless stress/strain measurement system is developed by integrating with pressure-sensitive sensors for health monitoring of concrete structures. The pressure-sensitive stress/strain sensors are fabricated by using nickel powder-filled cement-based composite. The wireless stress/strain measurement system integrated with these sensors is tested with compressive stress/strain in the range from 0 MPa/0 μɛ to 2.5 MPa/311.5 μɛ for performance evaluation. Experimental results indicate that the electrical resistivity of pressure-sensitive nickel powder-filled cement-based stress/strain sensors changes linearly and reversibly with the compressive stress/strain, and its fractional change goes up to 42.719% under uniaxial compression. The relationship between input (compressive stress/strain) and output (the fractional change in electrical resistivity) of the wireless stress/strain measurement system integrated with pressure-sensitive sensors is Δρ = −0.16894σ/Δρ = −1336.5ɛ. The wireless stress/strain measurement system can be used to achieve a sensitivity to stress/strain of 16.894% MPa−1/0.13365%μɛ−1 (a gauge factor of 1336.5) and a stress/strain resolution of 150 Pa/0.02 μɛ. The newly developed wireless stress/strain measurement system integrated with pressure-sensitive nickel powder-filled cement-based sensors has such advantages as high sensitivity to stress/strain, high stress/strain resolution, simple circuit and low energy consumption.

[1]  R. C. Tennyson,et al.  Fibre optic sensors in civil engineering structures , 2000 .

[2]  Hui Li,et al.  Study on Damage Emergency Repair Performance of a Simple Beam Embedded with Shape Memory Alloys , 2004 .

[3]  Hiroshi Inada,et al.  Experimental study on structural health monitoring of RC columns using self-diagnosis materials , 2004, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[4]  Pierre-Claude Aitcin,et al.  Cements of yesterday and today Concrete of tomorrow , 2000 .

[5]  D. Khastgir,et al.  Pressure-sensitive electrically conductive nitrile rubber composites filled with particulate carbon black and short carbon fibre , 1990 .

[6]  Billie F. Spencer,et al.  Smart sensing technology: opportunities and challenges , 2004 .

[7]  Ron Davies.  Remote monitoring of reinforced concrete structures , 2004 .

[8]  H. Hassan,et al.  The physical properties of pressure sensitive rubber composites , 2006 .

[9]  Yan Yu,et al.  Development of a kind of multi-variable wireless sensor for structural health monitoring in civil engineering , 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[10]  Ken P. Chong,et al.  Health Monitoring of Civil Structures , 1998 .

[11]  Chung Bang Yun,et al.  Multiple Crack Detection of Concrete Structures Using Impedance-based Structural Health Monitoring Techniques , 2006 .

[12]  Wei-Hsin Liao,et al.  Wireless transmission for health monitoring of large structures , 2006, IEEE Transactions on Instrumentation and Measurement.

[13]  Hui Li,et al.  A study on mechanical and pressure-sensitive properties of cement mortar with nanophase materials , 2004 .

[14]  Keat G Ong,et al.  Tracking the harmonic response of magnetically-soft sensors for wireless temperature, stress, and corrosive monitoring. , 2002, Sensors and actuators. A, Physical.

[15]  Jinping Ou,et al.  Embedded piezoresistive cement-based stress/strain sensor , 2007 .

[16]  Jinping Ou,et al.  Electrode design, measuring method and data acquisition system of carbon fiber cement paste piezoresistive sensors , 2007 .

[17]  W De Corte,et al.  A case study on strain gauge measurements on large post-tensioned concrete beams of a railway support structure , 2003 .

[18]  D.D.L. Chung,et al.  Self-monitoring structural materials , 1998 .

[19]  Jinping Ou,et al.  Some recent advances of intelligent health monitoring systems for civil infrastructures in HIT , 2005, Fundamental Problems of Optoelectronics and Microelectronics.

[20]  Greg E. Bridges,et al.  Wireless strain sensor based on resonant RF cavities , 2004, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[21]  Song Xian-hui.  Corrosion Monitoring of Rebar by Compression Sensitivity of CFRC , 2004 .

[22]  Hiroshi Inada,et al.  The SHM system using self-diagnosis material and wireless data measurement device , 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[23]  Huang Long-nan,et al.  Study on Pulling Sensitivity Character of CFRC and Smart Monitoring of Beam Specimens , 2005 .

[24]  Jerome P. Lynch,et al.  Rapid-to-deploy wireless monitoring systems for static and dynamic load testing of bridges: validation on the Grove Street Bridge , 2006, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[25]  D.D.L. Chung,et al.  Carbon fiber-reinforced concrete for traffic monitoring and weighing in motion , 1999 .

[26]  Hui Li,et al.  Effect of compressive strain on electrical resistivity of carbon black-filled cement-based composites , 2006 .

[27]  Jinsong Leng,et al.  Structural health monitoring of concrete cylinders using protected fibre optic sensors , 2006 .

[28]  Sharon L. Wood,et al.  Development of state sensors for civil engineering structures , 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[29]  Xiaohua Zhao,et al.  Pressure-sensitive properties and microstructure of carbon nanotube reinforced cement composites , 2007 .