Kappa Number Prediction of Acacia melanoxylon Unbleached Kraft Pulps using NIR-PLSR Models with a Narrow Interval of Variation

A total of 120 Acacia melanoxylon R. Br. (Australian blackwood) stem discs, belonging to 20 trees from four sites in Portugal, were used in this study. The samples were kraft pulped under standard identical conditions targeted to a Kappa number of 15. A Near Infrared (NIR) partial least squares regression (PLSR) model was developed for the Kappa number prediction using 75 pulp samples with a narrow Kappa number variation range of 10 to 17. Very good correlations between NIR spectra of A. melanoxylon pulps and Kappa numbers were obtained. Besides the raw spectra, also pre-processed spectra with ten methods were used for PLS analysis (cross validation with 48 samples), and a test set validation was made with 27 samples. The first derivative spectra in the wavenumber range from 6110 to 5440 cm-1 yielded the best model with a root mean square error of prediction of 0.4 units of Kappa number, a coefficient of determination of 92.1%, and two PLS components, with the ratios of performance to deviation (RPD) of 3.6 and zero outliers. The obtained NIR-PLSR model for Kappa number determination is sufficiently accurate to be used in screening programs and in quality control.

[1]  L. Mendes,et al.  Calibrations based on near infrared spectroscopic data to estimate wood-cement panel properties. , 2009 .

[2]  Anupun Terdwongworakul,et al.  Rapid assessment of wood chemical properties and pulp yield of Eucalyptus camaldulensis in Thailand tree plantations by near infrared spectroscopy for improving wood selection for high quality pulp , 2005, Journal of Wood Science.

[3]  Jing Zhang,et al.  RAPID PREDICTIVE MODELS FOR MINIMALLY DESTRUCTIVE KAPPA NUMBER AND PULP YIELD OF ACACIA SPP. WITH NEAR INFRARED REFLECTANCE (NIR) SPECTROSCOPY , 2012 .

[4]  S. Kelley,et al.  Use of near infrared spectroscopy to predict the mechanical properties of six softwoods , 2004 .

[5]  Helena Pereira,et al.  Estimation of Wood Basic Density of Acacia Melanoxylon (R. Br.) by near Infrared Spectroscopy , 2012 .

[6]  A. Lourenço,et al.  The influence of heartwood on the pulping properties of Acacia melanoxylon wood , 2008, Journal of Wood Science.

[7]  Raimo Alén,et al.  A spectroscopic method for determining lignin content of softwood and hardwood kraft pulps , 1998 .

[8]  Sheng Yao,et al.  Determination of lignin content in Acacia spp. using near-infrared reflectance spectroscopy , 2010, BioResources.

[9]  G. R. Hodge,et al.  Use of near Infrared Spectroscopy to Predict Lignin Content in Tropical and Sub-Tropical Pines , 2004 .

[10]  O. Anjos,et al.  Variation of wood density and mechanical properties of blackwood (Acacia melanoxylon R. Br.) , 2014 .

[11]  Helena Pereira,et al.  Influence on pulping yield and pulp properties of wood density of Acacia melanoxylon , 2012, Journal of Wood Science.

[12]  Leslie H. Groom,et al.  Use of near infrared spectroscopy to measure the chemical and mechanical properties of solid wood , 2004, Wood Science and Technology.

[13]  J. Baeza,et al.  Estimation of Hexenuronic Acids and Kappa Number in Kraft Pulps of Eucalyptus Globulus by Fourier Transform near Infrared Spectroscopy and Multivariate Analysis , 2008 .

[14]  Ofélia Anjos,et al.  Avaliação da Qualidade do Papel Produzido com Fibra de Acacia spp. , 2005 .

[15]  J. A. Wright,et al.  Prediction of pulp yield and cellulose content from wood samples using near infrared reflectance spectroscopy , 1990 .

[16]  R. Simões,et al.  Variation of some wood macroscopic properties along the stem of Acacia melanoxylon R. Br. adult trees in Portugal , 2013 .

[17]  Laurence R. Schimleck,et al.  Determination of Important Pulp Properties of Hybrid Poplar by Near Infrared Spectroscopy , 2007 .

[18]  António J.A. Santos,et al.  Utilização Potencial do Lenho de Acacia melanoxylon: a Crescer em Povoamentos Puros ou Mistos com Pinus pinaster - pela Indústria Florestal Portuguesa , 2007 .

[19]  Márcia M. C. Ferreira,et al.  MULTIVARIATE CALIBRATION FOR QUANTITATIVE ANALYSIS OF EUCALYPT KRAFT PULP BY NIR SPECTROMETRY , 2002 .

[20]  Rogério Simões,et al.  Papermaking potential of Acacia dealbata and Acacia melanoxylon , 2006 .

[21]  Notburga Gierlinger,et al.  Rapid Determination of Heartwood Extractives in Larix sp. by Means of Fourier Transform near Infrared Spectroscopy , 2002 .

[22]  Henrik Antti,et al.  Detection of kappa number distributions in kraft pulps using nir spectroscopy and multivariate calibration , 2000 .

[23]  Carolyn A Raymond,et al.  Predicting Extractives, Lignin, and Cellulose Contents Using Near Infrared Spectroscopy on Solid Wood in Eucalyptus globulus , 2006 .

[24]  A. J. Michell.  Pulpwood quality estimation by near-infrared spectroscopic measurements on eucalypt woods , 1995 .

[25]  M. Schwanninger,et al.  NIR PLSR model selection for Kappa number prediction of maritime pine Kraft pulps , 2007, Wood Science and Technology.

[26]  Helena Pereira,et al.  Calibration of NIR to assess lignin composition (H/G ratio) in maritime pine wood using analytical pyrolysis as the reference method , 2006 .

[27]  Rogério Simões,et al.  Effect of Acacia Melanoxylon Fibre Morphology on Papermaking Potential , 2011 .

[28]  Urban Bergsten,et al.  Prediction of basic wood properties for Norway spruce. Interpretation of Near Infrared Spectroscopy data using partial least squares regression , 2001, Wood Science and Technology.

[29]  Satoru Tsuchikawa,et al.  Eucalyptus camaldulensis density and fiber length estimated by near-infrared spectroscopy , 2010, Wood Science and Technology.

[30]  D. B. Easty,et al.  Near-infrared spectroscopy for the analysis of wood pulp : quantifying hardwood-softwood mixtures and estimating lignin content , 1990 .

[31]  Roger Meder,et al.  Developing and evaluating a multisite and multispecies NIR calibration for the prediction of Kraft pulp yield in eucalypts , 2009 .

[32]  Sofia Knapic,et al.  Heartwood and sapwood variation in Acacia melanoxylon R. Br. trees in Portugal , 2006 .

[33]  Henrik Antti,et al.  Multivariate calibration models using NIR spectroscopy on pulp and paper industrial applications , 1996 .

[34]  L. Schimleck,et al.  Near-infrared spectra and chemical compositions of E. globulus and E. nitens plantation woods , 1997 .

[35]  M. Schwanninger,et al.  A common near infrared—based partial least squares regression model for the prediction of wood density of Pinus pinaster and Larix × eurolepis , 2010, Wood Science and Technology.