Finite element analysis of smooth, folded and multi-shell structures

The paper is concerned with the nonlinear theory and finite element analysis of shell structures with an arbitrary geometry, loading and boundary conditions. A complete set of shell field equations and side conditions (boundary and jump conditions) is derived from the basic laws of continuum mechanics. The developed shell theory includes the so-called drilling couples as well as the drilling rotation. It is shown that this property is crucial in the analysis of irregular shell structures, such as those containing folds, branches, column supports, stiffeners, etc. The relevant variational principles with relaxed regularity requirements are also presented. These principles provide the mathematical basis for the formulation of various classes of shell finite elements. The developed finite elements include a displacement/rotation based Lagrange family, a stress resultant based mixed and a semi-mixed family as well as so-called assumed strain elements. All elements have six degrees of freedom at each node, three translational and three rotational ones, including the drilling rotation formulated on the foundation of an exact (in defined sense) shell theory. As such, they are equally applicable to smooth as well as to irregular shell structures. The general applicability of the developed elements is illustrated through an extensive numerical analysis of the representative test examples. In order to obtain a still deeper insight into the problem a Lagrange family of standard degenerated shell elements with five degrees of freedom per node and an element with six degrees of freedom per node based on the von Karman plate theory are considered as well. The presented numerical results include complex plate and doubly-curved shell structures. Linear and non-linear solutions with a pre- and post-buckling analysis are discussed.

[1]  E. Hinton,et al.  A new nine node degenerated shell element with enhanced membrane and shear interpolation , 1986 .

[2]  J. Chróścielewski,et al.  Genuinely resultant shell finite elements accounting for geometric and material non-linearity , 1992 .

[3]  Peter Wriggers,et al.  Theory and numerics of thin elastic shells with finite rotations , 1989 .

[4]  Sunil Saigal,et al.  Advances of thin shell finite elements and some applications—version I , 1990 .

[5]  W. Pietraszkiewicz.  Finite Rotations in Structural Mechanics , 1986 .

[6]  W. C. Schnobrich.  Thin Shell Structures , 1985 .

[7]  The Nonlinear Thermodynamical Theory of Shells: Descent from 3-Dimensions without Thickness Expansions , 1984 .

[8]  O. C. Zienkiewicz,et al.  Analysis of thick and thin shell structures by curved finite elements , 1970 .

[9]  R. L. Harder,et al.  A proposed standard set of problems to test finite element accuracy , 1985 .

[10]  Carlo Sansour,et al.  The Cosserat surface as a shell model, theory and finite-element formulation , 1995 .

[11]  E. Ramm,et al.  Shell theory versus degeneration—a comparison in large rotation finite element analysis , 1992 .

[12]  Frederic Y. M. Wan,et al.  Membrane and bending stresses in shallow spherical shells , 1967 .

[13]  Suha Oral,et al.  A shear-flexible facet shell element for large deflection and instability analysis , 1991 .

[14]  J. Argyris,et al.  An efficient and locking-free flat anisotropic plate and shell triangular element , 1994 .

[15]  K. Bathe,et al.  A continuum mechanics based four‐node shell element for general non‐linear analysis , 1984 .

[16]  J. Argyris.  An excursion into large rotations , 1982 .

[17]  H. Saunders,et al.  Finite element procedures in engineering analysis , 1982 .

[18]  Peter Wriggers,et al.  Thin shells with finite rotations formulated in biot stresses : theory and finite element formulation , 1993 .

[19]  Atef F. Saleeb,et al.  A hybrid/mixed model for non‐linear shell analysis and its applications to large‐rotation problems , 1990 .

[20]  Yavuz Başar,et al.  Finite-rotation elements for the non-linear analysis of thin shell structures , 1990 .

[21]  J. C. Simo,et al.  A drill rotation formulation for geometrically exact shells , 1992 .

[22]  Ekkehard Ramm,et al.  An assessment of assumed strain methods in finite rotation shell analysis , 1989 .

[23]  D. J. Allman,et al.  A basic flat facet finite element for the analysis of general shells , 1994 .

[24]  J. C. Simo,et al.  On a stress resultant geometrically exact shell model. Part III: computational aspects of the nonlinear theory , 1990 .

[25]  M. De.  Handbuch der Physik , 1957 .

[26]  J. C. Simo,et al.  On a stress resultant geometrically exact shell model. Part VII: Shell intersections with -DOF finite element formulations , 1993 .

[27]  Wojciech Pietraszkiewicz,et al.  Theory and numerical analysis of shells undergoing large elastic strains , 1992 .

[28]  Nam-Sua Lee,et al.  On the use of hierartchical models in engineering analyqiq , 1990 .

[29]  H. Parisch,et al.  An investigation of a finite rotation four node assumed strain shell element , 1991 .

[30]  R. C. Benson,et al.  Flexible Shells: Theory and Applications , 1984 .

[31]  P. M. Naghdi,et al.  On the Derivation of Shell Theories by Direct Approach , 1974 .

[32]  H. C. Chen,et al.  Evaluation of Allman triangular membrane element used in general shell analyses , 1992 .

[33]  Eduardo N. Dvorkin,et al.  A formulation of general shell elements—the use of mixed interpolation of tensorial components† , 1986 .

[34]  W. Pietraszkiewicz.  Finite rotations and Lagrangean description in the non-linear theory of shells , 1979 .

[35]  M. A. Aminpour,et al.  Direct formulation of a hybrid 4-node shell element with drilling degrees of freedom , 1992 .

[36]  Post-buckling strength of thin-walled members , 1979 .

[37]  H. Kebari,et al.  Non-conforming modes stabilization of a nine-node stress-resultant degenerated shell element with drilling freedom , 1991 .

[38]  Gerald Wempner,et al.  Mechanics and Finite Elements of Shells , 1989 .

[39]  G. Dhatt,et al.  Three discrete Kirchhoff elements for shell analysis with large geometrical non‐linearities and bifurcations , 1987 .

[40]  C. Rankin,et al.  Finite rotation analysis and consistent linearization using projectors , 1991 .

[41]  L. Vu-Quoc,et al.  A class of simple and efficient degenerated shell elements-analysis of global spurious-mode filtering , 1989 .

[42]  J. Makowski,et al.  On the “Symmetry” of Tangent Operators in Nonlinear Mechanics , 1995 .

[43]  Miguel Luiz Bucalem,et al.  On the use of hierarchical models in engineering analysis , 1990 .

[44]  S. Timoshenko,et al.  THEORY OF PLATES AND SHELLS , 1959 .

[45]  Y. Başar,et al.  Finite-rotation shell elements via mixed formulation , 1992 .

[46]  J. Makowski,et al.  Finite Strains and Rotations in Shells , 1986 .

[47]  J. Makowski,et al.  Buckling equations for elastic shells with rotational degrees of freedom undergoing finite strain deformation , 1990 .

[48]  François Frey,et al.  A four node Marguerre element for non‐linear shell analysis , 1986 .

[49]  J. Makowski,et al.  On large strain deformations of shells , 1987 .

[50]  J. G. Simmonds,et al.  Nonlinear Elastic Shell Theory , 1983 .