An Assessment of Data Requirements and Data Transfer Formats for Layered Manufacturing

Disclaimer Certain commercially available hardware and software products are identified in this report to provide representative examples of current practice and to facilitate understanding of the issues discussed. Their identification does not imply any approval or endorsement of those products by the National Institute of Standards and Technology, nor does it imply that the products identified are necessarily the best available for their purpose.

[1]  Eugenio Oñate,et al.  Numerical analysis of stereolithography processes using the finite element method , 1995 .

[2]  J. Koch,et al.  Laser aided direct deposition of metals , 1997 .

[3]  Joseph J. Beaman,et al.  Parametric Representation of Part Contours in SLS Process , 1996 .

[4]  A. Dolenc,et al.  Rapid recipes for parametric surface models , 1995, Comput. Graph..

[5]  Georges M. Fadel,et al.  Feature Extraction From Tessellated And Sliced Data in Layered Manufacturing , 1996 .

[6]  Per Carleberg.  Product Model Driven Direct Manufacturing , 1994 .

[7]  Michael Wozny,et al.  Systems Issues in Solid Freeform Fabrication , 1992 .

[8]  Noboru Kikuchi,et al.  Topology and Generalized Layout Optimization of Elastic Structures , 1993 .

[9]  S. Coquillart.  Computing offsets of B-spline curves , 1987 .

[10]  Michael J. Wozny,et al.  A topology-based approach for sell-closure , 1992, Geometric Modeling.

[11]  Michael A. Dincau.  Solid modeling and product data exchange using STEP (PDES/STEP) , 1995 .

[12]  Seth Allen,et al.  On the Computation Of Part Orientation Using Support Structures in Layered Manufacturing , 1994 .

[13]  Jan Helge Bøhn,et al.  Adaptive slicing using stepwise uniform refinement , 1996 .

[14]  Michael J. Wozny,et al.  Adaptive Slicing of Solid Freeform Fabrication Processes , 1994 .

[15]  Rida T. Farouki,et al.  Computational methods for rapid prototyping of analytic solid models , 1996 .

[16]  R. I. Campbell,et al.  Creating a database of rapid prototyping system capabilities , 1996 .

[17]  Richard H. Crawford,et al.  Computer Aspects of Solid Freeform Fabrication: Geometry, Process Control, and Design , 1993 .

[18]  Jan Helge Bøhn.  Automatic CAD-model repair , 1993 .

[19]  Ron Jamieson,et al.  Direct slicing of CAD models for rapid prototyping , 1995 .

[20]  Michael Keefe,et al.  Studies in Stereolithography : Influence of Process Parameters on Curl Distortion in Photopolymer Models , 1994 .

[21]  Donald E. LaCourse.  Handbook of solid modeling , 1995 .

[22]  Georges Fadel,et al.  Expert system-based selection of the preferred direction of build for rapid prototyping processes , 1995, J. Intell. Manuf..

[23]  Georges M. Fadel,et al.  Accuracy issues in CAD to RP translations , 1996 .

[24]  Michael J. Wozny,et al.  Generating Topological Information from a "Bucket of Facets" , 1992 .

[25]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .

[26]  Sashidhar Guduri.  Direct Generation of Contour Files from Constructive Solid Geometry Representations , 1993 .

[27]  Richard H. Crawford,et al.  Optimizing Part Quality with Orientation , 1995 .

[28]  Wayne Tiller,et al.  Offsets of Two-Dimensional Profiles , 1984, IEEE Computer Graphics and Applications.

[29]  Unny Menon,et al.  Mechanical and Dimensional Characteristics of Fused Deposition Modeling Build Styles , 1996 .

[30]  Michael J. Wozny,et al.  Integration of a Solid Freeform Fabrication Process into a Feature-Based CAD System Environment , 1995 .

[31]  C. C. Jara-Almonte,et al.  A Parallel Slicing Algorithm for Solid Freeform Fabrication Processes , 1992 .

[32]  Xuejun Sheng,et al.  Generating topological structures for surface models , 1995, IEEE Computer Graphics and Applications.

[33]  Larry Jones,et al.  Support Generation for Fused Deposition Modeling , 1995 .

[34]  Stuart Brown,et al.  Simulation of Solid Freeform Fabrication , 1993 .

[35]  ARISTIDES A. G. REQUICHA,et al.  Representations for Rigid Solids: Theory, Methods, and Systems , 1980, CSUR.

[36]  N. M. Aziz,et al.  A model for interfacing geometric modeling data with rapid prototyping systems , 1995 .

[37]  David L. Bourell,et al.  An Evaluation of the Mechanical Behavior of Bronze-NI Composites Produced by Selective Laser Sintering , 1993 .

[38]  Jan Helge Bøhn,et al.  Removing zero-volume parts from CAD models for layered manufacturing , 1995, IEEE Computer Graphics and Applications.

[39]  Debasish Dutta,et al.  An accurate slicing procedure for layered manufacturing , 1996, Comput. Aided Des..

[40]  Stephane M. Morvan,et al.  IVECS, Interactively Correcting .STL Files in a Virtual Environment , 1996 .

[41]  Allan J. Lightman,et al.  Reducing Warpage In Sterelothiography Through Novel Draw Styles , 1994 .

[42]  Jon Owen,et al.  Step - an introduction , 1997, Product data engineering.

[43]  Andrew Y. C. Nee,et al.  Multi‐objective optimization of part‐ building orientation in stereolithography , 1995 .

[44]  Michael J. Bailey,et al.  Tele-Manufacturing: rapid prototyping on the Internet , 1995, IEEE Computer Graphics and Applications.

[45]  Michael J. Wozny,et al.  Automatic CAD-model Repair: Shell-Closure , 1992 .

[46]  Terry T. Wohlers.  Solid modeling and rapid prototyping , 1995 .

[47]  André Dolenc,et al.  Slicing procedures for layered manufacturing techniques , 1994, Comput. Aided Des..

[48]  Vijay Chandru,et al.  Voxel-based modeling for layered manufacturing , 1995, IEEE Computer Graphics and Applications.

[49]  Richard H. Crawford,et al.  A Method to Generate Exact Contour Files for Solid Freeform Fabrication , 1992 .

[50]  Sara McMains.  Rapid Prototyping of Solid Three-Dimensional Parts , 1995 .

[51]  Joel W. Barlow,et al.  Effect of Processing Parameters In SLS Of Metal-Polymer Powders , 1995 .

[52]  Helmut J. Helpenstein.  CAD Geometry Data Exchange Using STEP , 1993, Research Reports Esprit.

[53]  Kevin K. Jurrens.  An Assessment of the State-of-the-Art in Rapid Prototyping Systems for Mechanical Parts | NIST , 1993 .

[54]  Michael J. Wozny,et al.  Utilizing Topological Information to Increase Scan Vector Generation Efficiency , 1991 .

[55]  Seth Allen,et al.  Wall thickness control in layered manufacturing , 1997, SCG '97.

[56]  A. Dolenc,et al.  Rapid prototyping from a computer scientist’s point of view , 1996 .

[57]  Donald G. Baird,et al.  Effects of processing conditions on short TLCP fiber reinforced FDM parts , 1998 .

[58]  Stephen J. Rock,et al.  The Use of STEP to Integrate Design and Solid Freeform Fabrication , 1995 .

[59]  A. Dolenc,et al.  Some Efficient Procedures for Correcting Triangulated Models , 1993 .

[60]  Paul A. Sullivan,et al.  Predicting total build‐time and the resultant cure depth of the 3D stereolithography process , 1996 .