Intelligent management systems in operations: a review

Operations management is an area that has recently started to benefit from the use of AI techniques such as expert systems, neural networks and genetic algorithms. These techniques can extend the usefulness of OR modelling and enable new types of decision tasks to be supported by computer-based systems. This paper attempts to review ‘intelligent’ decision support systems and their potential to address some of the problems faced in various areas of operations management. Some useful techniques developed in the field of artificial intelligence are outlined and examples of attempts to use these approaches to support decision making in various areas of operations management are described. Recognising the scale of a complete review of all these areas, emphasis has been given to the most significant and more recent publications.

[1]  Roger G. Schroeder,et al.  Operations Management: Decision Making in the Operations Function , 1981 .

[2]  Christian Bierwirth,et al.  A Case Study of Operational Just-In-Time Scheduling Using Genetic Algorithms , 1995 .

[3]  Joe G. Chow,et al.  Design and development of an intelligent machine system , 1995 .

[4]  Sean B. Eom,et al.  A survey of decision support system applications (1988–1994) , 1998, J. Oper. Res. Soc..

[5]  Chuen-Sheng Cheng,et al.  A NEURAL NETWORK APPROACH FOR THE ANALYSIS OF CONTROL CHART PATTERNS , 1997 .

[6]  De-Li Yang,et al.  An Integrated Decision Support System in a Chinese Chemical Plant , 1993 .

[7]  Raymond S. K. Kwan,et al.  Development of a Driver Duty Estimator , 1995 .

[8]  Ali K. Kamrani,et al.  A knowledge-based system for fault diagnosis and maintenance of advanced automated systems , 1995 .

[9]  Yuehwern Yih,et al.  Indentifying attributes for knowledge-based development in dynamic scheduling environments , 1996 .

[10]  Peter Duchessi,et al.  Evolutionary Steps in Expert Systems Projects , 1995 .

[11]  Margaret F. Shipley,et al.  A Fuzzy Logic Approach for Determining Expected Values: A Project Management Application , 1996 .

[12]  Edward Tsang.  Scheduling techniques: a comparative study , 1995 .

[13]  Luca Settineri,et al.  An Application of Fuzzy Clustering to Cellular Manufacturing , 1997 .

[14]  Kenneth Fordyce,et al.  Artificial Intelligence and the Management Science Practitioner: Links between Operations Research and Expert Systems , 1987 .

[15]  Deborah J. Fisher,et al.  A Consortium Sponsored Knowledge-Based System for Managerial Decision Making in Industrial Construction , 1996 .

[16]  Ramesh Sharda,et al.  Neural Networks for the MS/OR Analyst: An Application Bibliography , 1994 .

[17]  Henk Sol,et al.  DSS: Buzzword or OR challenge? , 1985 .

[18]  Joseph M. Mellichamp,et al.  FMS Designer: An expert system for flexible manufacturing system design , 1990 .

[19]  Rob A. C. M. Broekmeulen.  Facility Management of Distribution Centres for Vegetables and Fruits , 1995 .

[20]  P. Venkataram,et al.  Network Fault Diagnosis Using a Realistic Abductive Reasoning Model , 1995 .

[21]  Vladimir Cherkassky,et al.  A neural network approach to job-shop scheduling , 1991, IEEE Trans. Neural Networks.

[22]  Bo K. Wong,et al.  Utilization and Benefits of Expert Systems in Manufacturing , 1994 .

[23]  Kenneth Fordyce,et al.  Artificial Intelligence and the Management Science Practitioner: One Definition of Knowledge-Based Expert Systems , 1989 .

[24]  Laura I. Burke,et al.  Neural networks and the part family/ machine group formation problem in cellular manufacturing: A framework using fuzzy ART , 1995 .

[25]  Joxan Jaffar,et al.  Constraint logic programming , 1987, POPL '87.

[26]  Abraham Charnes,et al.  Measuring the efficiency of decision making units , 1978 .

[27]  Barrie Dale,et al.  The use of expert systems in total quality management: An exploratory study , 1991 .

[28]  J. Hauser,et al.  The House of Quality , 1988 .

[29]  Fatemeh Zahedi,et al.  An Introduction to Neural Networks and a Comparison with Artificial Intelligence and Expert Systems , 1991 .

[30]  Juho Nikkola,et al.  Applying case-based reasoning to manufacturing systems design , 1991 .

[31]  Aristides A. G. Requicha,et al.  Geometric reasoning for intelligent manufacturing , 1996, CACM.

[32]  Michael Valenti,et al.  Strengthening weak links , 1995 .

[33]  Martha Grabowski,et al.  An expert system for maritime pilots: its design and assessment using gaming , 1993 .

[34]  Mahesh Gupta,et al.  A genetic algorithm-based approach to cell composition and layout design problems , 1996 .

[35]  Robert John,et al.  The use of fuzzy sets for resource allocation in an advance request vehicle brokerage system—a case study , 1997 .

[36]  Amit Gupta,et al.  Estimating Missing Values Using Neural Networks , 1996 .

[37]  Colin Eden,et al.  Evaluating Strategy — Its Role Within the Context of Strategic Control , 1993 .

[38]  George J. Klir,et al.  Fuzzy sets and fuzzy logic - theory and applications , 1995 .

[39]  Brahim Chaib-draa,et al.  Industrial applications of distributed AI , 1995, CACM.

[40]  Mahmut Parlar,et al.  EXPIM: a knowledge-based expert system for production/inventory modelling , 1989 .

[41]  Kin Keung Lai,et al.  Solving the AGV Problem via a Self-Organizing Neural Network , 1996 .

[42]  Michael J. DeHaemer,et al.  Assessing the Severity of Patients' Illnesses to Better Manage Health Care Resources , 1993 .

[43]  Jörg Biethahn,et al.  Determining a Good Inventory Policy with a Genetic Algorithm , 1995 .

[44]  Efraim Turban,et al.  Integrating Expert Systems and Decision Support Systems , 1986, MIS Q..

[45]  Eric B. Bartlett,et al.  Nuclear power plant fault diagnosis using neural networks with error estimation by series association , 1996 .

[46]  Taehee Kim,et al.  Feedforward neural networks for fault diagnosis and severity assessment of a screw compressor , 1995 .

[47]  David W. Coit,et al.  Solving the redundancy allocation problem using a combined neural network/genetic algorithm approach , 1996, Comput. Oper. Res..

[48]  Vcs Vincent Wiers,et al.  A review of the applicability of OR and AI scheduling techniques in practice , 1997 .

[49]  Li Pheng Khoo,et al.  Framework of a fuzzy quality function deployment system , 1996 .

[50]  L. P. Khoo,et al.  A knowledge-based approach to the generation of IDEF0 models , 1997 .

[51]  Sunderesh S. Heragu,et al.  Group Technology and Cellular Manufacturing , 1994, IEEE Trans. Syst. Man Cybern. Syst..

[52]  Gordon Allan,et al.  A comparison of a genetic algorithm with an experimental design technique in the optimization of a production process , 1997 .

[53]  C. L. Ang,et al.  Knowledge-based approach to the generation of IDEFO models , 1995 .

[54]  Donald E. Brown,et al.  Intelligent Scheduling Systems , 1995 .

[55]  Kenneth Fordyce,et al.  IBM Burlington's Logistics Management System , 1990 .

[56]  W. R. Allen,et al.  Expert Systems and Job Shop Scheduling , 1993 .

[57]  P. J. de Jongh,et al.  Future: A Knowledge-Based System for Threat Assessment , 1994 .

[58]  Uday R. Kulkarni,et al.  Dynamic grouping of parts in flexible manufacturing systems : a self-organizing neural networks approach , 1995 .

[59]  Barry G. Silverman,et al.  Knowledge-Based Systems and the Decision Sciences , 1995 .

[60]  C. Y. Teo,et al.  Use of an expert system shell to develop a power plant simulator for monitoring and fault diagnosis , 1994 .

[61]  Lawrence Davis,et al.  Job Shop Scheduling with Genetic Algorithms , 1985, ICGA.

[62]  Shouhong Wang,et al.  A Dynamic Perspective of Differences Between Cognitive Maps , 1996 .

[63]  Terry Anthony Byrd,et al.  Expert Systems in Production and Operations Management: Results of a Survey , 1993 .

[64]  John Bicheno,et al.  Expert Advice for JIT Implementation , 1993 .

[65]  Volker Nissen,et al.  An Introduction to Evolutionary Algorithms , 1995 .

[66]  Mario T. Tabucanon,et al.  Decision support system for multicriteria machine selection for flexible manufacturing systems , 1994 .

[67]  Mark S. Fox,et al.  Intelligent Scheduling , 1998 .

[68]  John P. McDermott,et al.  R1: A Rule-Based Configurer of Computer Systems , 1982, Artif. Intell..

[69]  James S. Noble,et al.  The changing basis of performance measurement , 1996 .

[70]  Michael A. S. Guth.  Development of an Expert System: Translating Higher-Level Decisions into Lower-Level Aircraft Flights , 1994 .

[71]  Venkat Allada,et al.  Machine understanding of manufacturing features , 1996 .

[72]  Kathryn A. Dowsland,et al.  Genetic Algorithms-a Tool for OR? , 1996 .

[73]  Mitsuo Gen,et al.  Genetic algorithm for robot selection and work station assignment problem , 1996 .

[74]  Dana S. Scott,et al.  Concurrent constraint programming languages , 1989 .

[75]  Mansour Rahimi,et al.  On Managing the Human Factors Engineering of Hybrid Production Systems , 1988 .

[76]  Antreas D. Athanassopoulos,et al.  A Comparison of Data Envelopment Analysis and Artificial Neural Networks as Tools for Assessing the Efficiency of Decision Making Units , 1996 .

[77]  Xiping Zhang,et al.  Neural networks in quality function deployment , 1996 .

[78]  Khairy A.H. Kobbacy.  The use of knowledge-based systems in evaluation and enhancement of maintenance routines , 1992 .

[79]  J. Wang.  (International Journal of Production Research, 35(4):995-1010)A Fuzzy Outranking Method for Conceptual Design Evaluation , 1997 .

[80]  M. Kambi,et al.  Timetabling in constraint logic programming , 1996 .

[81]  Georgios I. Doukidis,et al.  A Survey of the Application of Artificial Intelligence Techniques within the OR Society , 1990 .

[82]  Volker Nissen,et al.  On Using Penalty Functions and Multicriteria Optimisation Techniques in Facility Layout , 1995 .

[83]  Georgios Doukidis.  The expert systems product: The symbiosis with OR , 1989 .

[84]  Rommert Dekker,et al.  Applications of maintenance optimization models : a review and analysis , 1996 .

[85]  Nigel Slack,et al.  Operations management , 1994 .

[86]  Graham K. Rand,et al.  Decision Systems for Inventory Management and Production Planning , 1979 .

[87]  Soundar Kumara,et al.  Expert systems in industrial engineering , 1986 .

[88]  William Remus,et al.  Neural Network Models for Time Series Forecasts , 1996 .

[89]  Richard G. Platt,et al.  MAG-EX: a magnetics fabrication expert system focusing expert systems technology on improving quality control , 1992 .

[90]  R Séguin,et al.  Real-time decision problems: an operational research perspective , 1997 .

[91]  Varghese S. Jacob,et al.  Genetic Algorithms for Product Design , 1996 .

[92]  Hajime Asama,et al.  A knowledge based system using fuzzy inference for supervisory control of bioprocesses , 1994 .

[93]  Herbert A. Simon.  Two Heads Are Better than One: The Collaboration between AI and OR , 1987 .

[94]  Yuehwern Yih,et al.  An intelligent controller for manufacturing cells , 1996 .

[95]  Jean-Claude Latombe,et al.  GARI: A Problem Solver That Plans How to Machine Mechanical Parts , 1981, IJCAI.

[96]  Nong Ye,et al.  A hybrid intelligent system for fault diagnosis of advanced manufacturing system , 1996 .

[97]  Andrew Kusiak,et al.  Neural computing-based design of components for cellular manufacturing , 1996 .

[98]  Angus R. Simpson,et al.  Expert system for water treatment plant operation , 1996 .

[99]  Alan Kitchener.  The Impact of Technology on the Information Systems and Operations Research Professions , 1986 .

[100]  David Stockton,et al.  Identifying Economic Order Quantities Using Genetic Algorithms , 1993 .

[101]  Alain Colmerauer,et al.  An introduction to Prolog III , 1989, CACM.

[102]  Janet L. Kolodner,et al.  Case-Based Reasoning , 1989, IJCAI 1989.

[103]  Khairy A.H. Kobbacy,et al.  Towards An Intelligent Maintenance Optimization System , 1995 .

[104]  Ali K. Kamrani,et al.  An intelligent knowledge-based system for robotic cell design , 1995 .

[105]  Wickham Skinner,et al.  Manufacturing: The Formidable Competitive Weapon , 1985 .

[106]  M. Innala,et al.  Integrating computer aided quality assurance in flexible engineering and production processes , 1995 .

[107]  Amit Garg,et al.  On the Simulation Run Length: A Step towards Real Time Control in an FMS , 1990 .

[108]  John Jenkins,et al.  Expert knowledge, expert systems and commercial interests , 1985 .

[109]  Dimitris Askounis,et al.  Fault tolerance in supervisory control systems: a knowledge-based approach , 1994, J. Intell. Manuf..

[110]  Sean B. Eom.  A Survey of Operational Expert Systems in Business (1980–1993) , 1996 .

[111]  Andrew Bolton.  Design and development , 1999 .

[112]  Richard S. H. Mah,et al.  A real-time expert system for quality control , 1992, IEEE Expert.

[113]  Tsutomu Tabe,et al.  Design and utilization of a fuzzy knowledge-based system for design feature recognition of freehand illustrations , 1997 .

[114]  Kazuhiko Kawamura,et al.  Managing genetic search in job shop scheduling , 1993, IEEE Expert.

[115]  Feng Li,et al.  Development of a CAD-based intelligent manufacturing system , 1994 .

[116]  Herbert A. Simon,et al.  The new science of management decision , 1960 .

[117]  Farhi Marir,et al.  Case-based reasoning: A review , 1994, The Knowledge Engineering Review.

[118]  Vaidyanathan Jayaraman,et al.  Expert systems in production and operations management: Current applications and future prospects , 1996 .

[119]  Robert J. Vokurka,et al.  A prototype expert system for the evaluation and selection of potential suppliers , 1996 .

[120]  Sang M. Lee,et al.  A Survey of Decision Support System Applications (1971–April 1988) , 1990 .

[121]  S. H. Nasution.  Fuzzy Critical Path Method , 1994, IEEE Trans. Syst. Man Cybern. Syst..