Screen-printed back-to-back electroanalytical sensors.

We introduce the concept of screen-printed back-to-back electroanalytical sensors where in this facile and generic approach, screen-printed electrodes are printed back-to-back with a common electrical connection to the two working electrodes with the counter and reference electrodes for each connected in the same manner as a normal "traditional" screen-printed sensor would be. This approach utilises the usually redundant back of the screen-printed sensor, converting this "dead-space" into a further electrochemical sensor which results in improvements in the analytical performance. In the use of the back-to-back design, the electrode area is consequently doubled with improvements in the analytical performance observed with the analytical sensitivity (gradient of a plot of peak height/analytical signal against concentration) doubling and the corresponding limit-of-detection being reduced. We also demonstrate that through intelligent electrode design, a quadruple in the observed analytical sensitivity can also be realised when double microband electrodes are used in the back-to-back configuration as long as they are placed sufficiently apart such that no diffusional interaction occurs. Such work is generic in nature and can be facilely applied to a plethora of screen-printed (and related) sensors utilising the commonly overlooked redundant back of the electrode providing facile improvements in the electroanalytical performance.

[1]  C. Wilke,et al.  Correlation of diffusion coefficients in dilute solutions , 1955 .

[2]  Craig E. Banks,et al.  Characterization and fabrication of disposable screen printed microelectrodes , 2009 .

[3]  Jonathan P. Metters,et al.  Graphene Electrochemistry: Surfactants Inherent to Graphene Can Dramatically Effect Electrochemical Processes , 2011 .

[4]  H L Pardue,et al.  The inseparable triad: analytical sensitivity, measurement uncertainty, and quantitative resolution. , 1997, Clinical chemistry.

[5]  D. A. Brownson,et al.  Graphene electrochemistry: fundamental concepts through to prominent applications. , 2012, Chemical Society reviews.

[6]  Jonathan P. Metters,et al.  Screen printed graphite electrochemical sensors for the voltammetric determination of antimony(III) , 2013 .

[7]  Jonathan P. Metters,et al.  The fabrication, characterisation and electrochemical investigation of screen-printed graphene electrodes. , 2014, Physical chemistry chemical physics : PCCP.

[8]  C. R. Raj,et al.  Mediatorless voltammetric oxidation of NADH and sensing of ethanol. , 2005, Biosensors & bioelectronics.

[9]  Miguel J. Prieto,et al.  Development of Optimized Screen-Printed Immunosensors , 2009, IEEE Transactions on Instrumentation and Measurement.

[10]  R. R. Moore,et al.  Basal plane pyrolytic graphite modified electrodes: comparison of carbon nanotubes and graphite powder as electrocatalysts. , 2004, Analytical chemistry.

[11]  C. Banks,et al.  Chemically Modified Carbon Nanotubes for Use in Electroanalysis , 2006 .

[12]  T. Camp,et al.  Water and Its Impurities , 1963 .

[13]  E. Paleček,et al.  Native and denatured forms of proteins can be discriminated at edge plane carbon electrodes. , 2012, Analytica chimica acta.

[14]  Jonathan P. Metters,et al.  The fabrication of novel screen printed single-walled carbon nanotube electrodes: Electroanalytical applications , 2013 .

[15]  A. Ribeiro,et al.  Computation of the Diffusion Coefficients in Aqueous Electrolyte Solutions from Onsager‐Fuoss and Pikal Theories , 1995 .

[16]  R. Macholz.  J. M. Concon: Food Toxicology. Part A: Principles and Concepts, Part B: Contaminants and Additives. 1371 Seiten, zahlr. Tab. Marcel Dekker, Inc., New York, Basel 1988. , 1988 .

[17]  Jonathan P. Metters,et al.  Fabrication of co-planar screen printed microband electrodes. , 2013, The Analyst.

[18]  Jonathan P. Metters,et al.  Electroanalytical properties of screen printed graphite microband electrodes , 2012 .

[19]  Shaoping Deng,et al.  A novel sweet taste cell-based sensor. , 2010, Biosensors & bioelectronics.

[20]  D. A. Brownson,et al.  Graphene electrochemistry: an overview of potential applications. , 2010, The Analyst.

[21]  D. Metzler,et al.  Biochemistry: The Chemical Reactions of Living Cells , 1977 .

[22]  Agustín Costa-García,et al.  Manufacture and evaluation of carbon nanotube modified screen-printed electrodes as electrochemical tools. , 2007, Talanta.

[23]  Camelia Bala,et al.  Screen-printed electrodes with electropolymerized Meldola Blue as versatile detectors in biosensors. , 2003, Biosensors & bioelectronics.

[24]  Jonathan P. Metters,et al.  Paper-based electroanalytical sensing platforms , 2013 .

[25]  Jonathan P. Metters,et al.  Electroanalytical applications of screen printed microelectrode arrays , 2013 .

[26]  Jonathan P. Metters,et al.  Electroanalytical sensing of selenium(IV) utilising screen printed graphite macro electrodes , 2013 .

[27]  Jonathan P. Metters,et al.  Electrochemical impedance spectroscopy versus cyclic voltammetry for the electroanalytical sensing of capsaicin utilising screen printed carbon nanotube electrodes. , 2013, The Analyst.

[28]  Richard G. Compton,et al.  Measurement of the diffusion coefficients of [Ru(NH3)6]3+ and [Ru(NH3)6]2+ in aqueous solution using microelectrode double potential step chronoamperometry , 2011 .

[29]  S. Epstein,et al.  Nitrosamines as Environmental Carcinogens , 1970, Nature.

[30]  C. Banks,et al.  The cyclic and linear sweep voltammetry of regular arrays of microdisc electrodes : Fitting of experimental data , 2005 .

[31]  N. Lawrence,et al.  Boron-doped diamond microdisc arrays: electrochemical characterisation and their use as a substrate for the production of microelectrode arrays of diverse metals (Ag, Au, Cu)via electrodeposition. , 2005, The Analyst.

[32]  R. Compton,et al.  Electrochemical determination of nitrite at a bare glassy carbon electrode; why chemically modify electrodes? , 2010 .

[33]  A. Fujishima,et al.  Determination of Nitrite and Nitrogen Oxides by Anodic Voltammetry at Conductive Diamond Electrodes , 2001 .

[34]  Walter Hayduk,et al.  Prediction of diffusion coefficients for nonelectrolytes in dilute aqueous solutions , 1974 .

[35]  Jonathan P. Metters,et al.  Electroanalytical properties of screen printed shallow recessed electrodes , 2012 .

[36]  Yuyan Shao,et al.  Graphene Based Electrochemical Sensors and Biosensors: A Review , 2010 .

[37]  Joseph Wang.  Carbon‐Nanotube Based Electrochemical Biosensors: A Review , 2005 .

[38]  C. Chen,et al.  Porous screen-printed carbon electrode , 2012 .

[39]  Agustín Costa-García,et al.  Genosensor for SARS Virus Detection Based on Gold Nanostructured Screen‐Printed Carbon Electrodes , 2009 .

[40]  C. Ay,et al.  Mediatorless catalytic oxidation of NADH at a disposable electrochemical sensor , 2007 .

[41]  R. Compton,et al.  Cyclic voltammetry on electrode surfaces covered with porous layers: An analysis of electron transfer kinetics at single-walled carbon nanotube modified electrodes , 2008 .

[42]  Rashid O. Kadara,et al.  A Critical Review of the Electrocatalysis Reported at C60 Modified Electrodes , 2008 .

[43]  C. O’Sullivan,et al.  Amperometric determination of ascorbic acid in real samples using a disposable screen-printed electrode modified with electrografted o-aminophenol film. , 2008, Journal of agricultural and food chemistry.