Measurement of Interlaminar Tensile Strength and Elastic Properties of Composites Using Open-Hole Compression Testing and Digital Image Correlation

[1]  Fabrice Pierron,et al.  Novel procedure for complete in-plane composite characterization using a single T-shaped specimen , 1999 .

[2]  I. Villemure,et al.  Regularized virtual fields method for mechanical properties identification of composite materials , 2014 .

[3]  Luigi Bruno,et al.  Mechanical characterization of composite materials by optical techniques: A review , 2017 .

[4]  A. Makeev,et al.  Short‐beam Shear Method for Assessment of Stress–Strain Curves for Fibre‐reinforced Polymer Matrix Composite Materials , 2013 .

[5]  D. Marquardt.  An Algorithm for Least-Squares Estimation of Nonlinear Parameters , 1963 .

[6]  Raphaël Moulart,et al.  Identification of the Through-Thickness Orthotropic Stiffness of Composite Tubes from Full-Field Measurements , 2005 .

[7]  A. Makeev,et al.  A method for measurement of multiple constitutive properties for composite materials , 2012 .

[8]  Stéphane Avril,et al.  Experimental identification of a nonlinear model for composites using the grid technique coupled to the virtual fields method , 2006 .

[9]  A. Turón,et al.  An experimental analysis of the fracture behavior of composite bonded joints in terms of cohesive laws , 2016 .

[10]  E. Pagnacco,et al.  Identification from measurements of mechanical fields by finite element model updating strategies , 2009 .

[11]  M. Perrella,et al.  A novel methodology for shear cohesive law identification of bonded reinforcements , 2018, Composites Part B: Engineering.

[12]  Hugo Sol,et al.  Mixed numerical–experimental technique for orthotropic parameter identification using biaxial tensile tests on cruciform specimens , 2007 .

[13]  J. Passieux,et al.  Multiscale Displacement Field Measurement Using Digital Image Correlation: Application to the Identification of Elastic Properties , 2015 .

[14]  A. Makeev,et al.  Effects of defects on interlaminar tensile fatigue behavior of carbon/epoxy composites , 2013 .

[15]  C. Hühne,et al.  Digital image correlation strain measurement of thick adherend shear test specimen joined with an epoxy film adhesive , 2019, International Journal of Adhesion and Adhesives.

[16]  M. Sutton,et al.  Traction-separation relationship for polymer-modified bitumen under Mode I loading: Double cantilever beam experiment with stereo digital image correlation , 2017 .

[17]  A. Makeev,et al.  Methods for assessment of interlaminar tensile strength of composite materials , 2015 .

[18]  Andrew Makeev,et al.  Assessing 3D shear stress–strain properties of composites using Digital Image Correlation and finite element analysis based optimization , 2015 .

[19]  M. Bonnet,et al.  Overview of Identification Methods of Mechanical Parameters Based on Full-field Measurements , 2008 .

[20]  Michel Grédiac,et al.  The use of full-field measurement methods in composite material characterization: interest and limitations , 2004 .

[21]  Y. Stavsky,et al.  Stress concentrations around holes in anisotropic laminated plates , 1982 .

[22]  Andrew Makeev,et al.  Analysis Methods for Improving Confidence in Material Qualification for Laminated Composites , 2019, Journal of the American Helicopter Society.