Optimization of metal-supported solid oxide fuel cells with a focus on mass transport

[1]  S. Jensen,et al.  Production of a monolithic fuel cell stack with high power density , 2022, Nature Communications.

[2]  Boxun Hu,et al.  Metal-supported solid oxide fuel cells operating with reformed natural gas and sulfur , 2022, International Journal of Hydrogen Energy.

[3]  F. Marone,et al.  High temperature corrosion evaluation and lifetime prediction of porous Fe22Cr stainless steel in air in temperature range 700–900 °C , 2021, Corrosion Science.

[4]  A. Hagen,et al.  Performance of Metal Supported SOFCs Operated in Hydrocarbon Fuels and at Low (<650˚C) Temperatures , 2021, ECS Meeting Abstracts.

[5]  Boxun Hu,et al.  Scaleup and manufacturability of symmetric-structured metal-supported solid oxide fuel cells , 2021, Journal of Power Sources.

[6]  Tak-Hyoung Lim,et al.  Effect of applied current density on the degradation behavior of anode-supported flat-tubular solid oxide fuel cells , 2020 .

[7]  M. Bram,et al.  The Relation of Microstructure, Materials Properties and Impedance of SOFC Electrodes: A Case Study of Ni/GDC Anodes , 2020 .

[8]  M. Tucker,et al.  Ethanol internal reforming in solid oxide fuel cells: A path toward high performance metal-supported cells for vehicular applications [Journal of Power Sources 449 (2020) 227598] , 2020, Journal of Power Sources.

[9]  P. Hendriksen,et al.  Enhanced Activity of Pr6O11and CuO Infiltrated Ce0.9Gd0.1O2Based Composite Oxygen Electrodes , 2020 .

[10]  Min Hwan Lee,et al.  Progress in durability of metal-supported solid oxide fuel cells with infiltrated electrodes , 2019, Journal of Power Sources.

[11]  S. Mukerjee,et al.  Latest Results and Commercialization of the Ceres Power SteelCell® Technology Platform , 2019, ECS Transactions.

[12]  M. Tucker,et al.  High performance metal-supported solid oxide fuel cells with infiltrated electrodes , 2019, Journal of Power Sources.

[13]  Wei Liu,et al.  Electrochemical performance of nanostructured LNF infiltrated onto LNO cathode for BaZr0.1Ce0.7Y0.2O3-δ–based solid oxide fuel cell , 2018, International Journal of Hydrogen Energy.

[14]  M. Tucker.  Dynamic-temperature operation of metal-supported solid oxide fuel cells , 2018, Journal of Power Sources.

[15]  D. Ding,et al.  Infiltrated Pr2NiO4 as promising bi-electrode for symmetrical solid oxide fuel cells , 2018 .

[16]  M. Tucker.  Durability of symmetric-structured metal-supported solid oxide fuel cells , 2017 .

[17]  M. Tucker,et al.  Metal-supported solid oxide fuel cells operated in direct-flame configuration , 2017 .

[18]  K. Thydén,et al.  Development of Robust Metal‐Supported SOFCs and Stack Components in EU METSAPP Consortium , 2017 .

[19]  Chun-Liang Chang,et al.  Effect of plasma spraying power on LSGM electrolyte of metal-supported solid oxide fuel cells , 2017 .

[20]  M. Stange,et al.  Development of novel metal-supported proton ceramic electrolyser cell with thin film BZY15–Ni electrode and BZY15 electrolyte , 2017 .

[21]  M. Stange,et al.  Layered microstructures based on BaZr0.85Y0.15O3−δ by pulsed laser deposition for metal-supported proton ceramic electrolyser cells , 2017, Journal of Materials Science.

[22]  K. Gerdes,et al.  Engineering the solid oxide fuel cell electrocatalyst infiltration technique for industrial use , 2016 .

[23]  X. Ye,et al.  High performance solid oxide electrolysis cell with impregnated electrodes , 2015 .

[24]  X. Ye,et al.  Evaluation of Ni and Ni–Ce0.8Sm0.2O2−δ (SDC) impregnated 430L anodes for metal-supported solid oxide fuel cells , 2014 .

[25]  P. Sarkar,et al.  Slip-cast and hot-solution infiltrated porous yttria stabilized zirconia (YSZ) supported tubular fuel cells , 2014 .

[26]  Toshikazu Kotaka,et al.  The Impact of Platinum Reduction on Oxygen Transport in Proton Exchange Membrane Fuel Cells , 2014 .

[27]  Nicholas Burton,et al.  R&D and Commercialization of Metal-Supported SOFC Personal Power Products at Point Source Power , 2013 .

[28]  A. Weber,et al.  Manufacturing and characterization of metal-supported solid oxide fuel cells , 2011 .

[29]  Michael C. Tucker,et al.  Progress in metal-supported solid oxide fuel cells: A review , 2010 .

[30]  Lei Jin,et al.  Removal of Aqueous Phenol by Adsorption and Oxidation with Doped Hydrophobic Cryptomelane-Type Manganese Oxide (K−OMS-2) Nanofibers , 2010 .

[31]  H. Frandsen,et al.  Development of Planar Metal Supported SOFC with Novel Cermet Anode , 2009, ECS Transactions.

[32]  Michael C. Tucker,et al.  Performance of metal-supported SOFCs with infiltrated electrodes , 2007 .

[33]  Zhenwei Wang,et al.  Thermal plasma spraying for SOFCs: Applications, potential advantages, and challenges , 2007 .

[34]  G. Schiller,et al.  Ceramic Diffusion Barrier Layers for Metal Supported SOFCs , 2007 .

[35]  Min Hwan Lee,et al.  Effect of Surface-Specific Treatment by Infiltration into LaNi6Fe4O3- δ Cathodic Backbone for Solid Oxide Fuel Cells , 2019, Journal of The Electrochemical Society.

[36]  J. Nielsen,et al.  Towards High Power Density Metal Supported Solid Oxide Fuel Cell for Mobile Applications , 2018 .

[37]  Y. Larring,et al.  Critical Issues of Metal-Supported Fuel Cell , 2013 .