Finite Element Model Updating for the Runyang Cable-Stayed Bridge Tower Using Ambient Vibration Test Results

The finite element (FE) model updating method aims to fit the parameters of a given initial analytical model in such a way that the model behavior corresponds as closely as possible to the measured behavior. However, the success of applications of the method depends on the analytical conceptualization of complex civil engineering structures, a well-designed and controlled modal test and an integration of analytical and experimental arts. This paper presents a sensitivity-analysis-based FE model updating procedure for FE model updating of Runyang Cable-stayed Bridge tower based on ambient vibration measurements. The updated model results correlate well with the experimental data in both the active frequency range and the passive frequency range. Extensive comparisons are made among the results obtained from different model updating cases. It is found that the appropriate initial FE model and determination of updating parameters are very important for the FE model updating of Runyang Cable-stayed Bridge tower.

[1]  Julius S. Bendat,et al.  Engineering Applications of Correlation and Spectral Analysis , 1980 .

[2]  James M. W. Brownjohn,et al.  Dynamic Assessment of Curved Cable-Stayed Bridge by Model Updating , 2000 .

[3]  John E. Mottershead,et al.  Model Updating In Structural Dynamics: A Survey , 1993 .

[4]  Aleksandar Pavic,et al.  Updating of the Analytical Models of Two Footbridges Based on Modal Testing of Full-Scale Structures , 1998 .

[5]  R Cantieni.  UPDATING OF ANALYTICAL MODELS OF EXISTING LARGE STRUCTURES BASED ON MODAL TESTING , 1996 .

[6]  Chih-Chen Chang,et al.  Finite-Element Model Updating for the Kap Shui Mun Cable-Stayed Bridge , 2001 .

[7]  Qiusheng Li,et al.  Finite element model updating for a high-rise structure based on ambient vibration measurements , 2004 .

[8]  H. Saunders,et al.  Finite element procedures in engineering analysis , 1982 .

[9]  Xiao-Kun Huang,et al.  BRIEF INTRODUCTION TO CHINESE REVISED TECHNICAL SPECIFICATION FOR CONCRETE STRUCTURES OF TALL BUILDING , 2005 .

[10]  J. M. W. Brownjohn,et al.  Finite element model updating of a damaged structure , 1999 .

[11]  Hong Hao,et al.  Civil structure condition assessment by FE model updating: methodology and case studies , 2001 .

[12]  M. Q. Feng,et al.  Identification of a Dynamic System Using Ambient Vibration Measurements , 1998 .

[13]  E. Dascotte,et al.  Sensitivity-based Model Updating Using Multiple Types of Simultaneous State Variables , 1995 .

[14]  John E. Mottershead,et al.  Finite Element Model Updating in Structural Dynamics , 1995 .

[15]  M. Link,et al.  Model Quality Assessment and Model Updating , 1999 .

[16]  Dennis Göge,et al.  Assessment of computational model updating procedures with regard to model validation , 2003 .

[17]  John E. Mottershead,et al.  Geometric Parameters for Finite Element Model Updating of Joints and Constraints , 1996 .