A parametric study for wellbore strengthening

Abstract Wellbore strengthening is a commonly applied method for mitigating lost circulation during drilling challenging formations with narrow drilling mud weight windows. This technique artificially increases the wellbore's maximum sustainable pressure by bridging drilling induced or natural fractures with lost circulation material (LCM). Although a number of successful applications have been reported in the drilling industry, the effects of several parameters are still not thoroughly understood. This paper presents a finite-element model to investigate the effects of these parameters on the evolution of near-wellbore hoop stress and fracture width in wellbore strengthening. Results show that the hoop stress around the wellbore and along the fracture can be substantially increased by bridging the fracture with LCM. A desirable LCM bridge should have low enough permeability to ensure there is no fluid flow across it. The best place to bridge the fracture, from the hoop-stress-engagement point of view, is the fracture mouth near wellbore wall. Fluid leak-off through the wellbore wall and fracture surfaces affects both hoop stress and fracture width distributions. Young's modulus has a significant influence on fracture width distribution, whereas Poisson's ratio has a very small influence. Finally, several useful field implications for wellbore strengthening are provided.

[1]  Mohamed Y. Soliman,et al.  Investigation of Factors for Strengthening a Wellbore by Propping Fractures , 2009 .

[2]  Kenneth E. Gray,et al.  A fracture-mechanics-based model for wellbore strengthening applications , 2016 .

[3]  G. Fuh,et al.  Parametric Analysis of Wellbore-Strengthening Methods From Basic Rock Mechanics , 2012 .

[4]  Moji Karimi,et al.  Advanced Geomechanical Analysis of Wellbore Strengthening for Depleted Reservoir Drilling Applications , 2014 .

[5]  Fred E. Dupriest,et al.  Fracture Closure Stress (FCS) and Lost Returns Practices , 2005 .

[6]  Eric van Oort,et al.  Avoiding Losses in Depleted and Weak Zones by Constantly Strengthening Wellbores , 2011 .

[7]  Fred E. Dupriest,et al.  Method To Eliminate Lost Returns and Build Integrity Continuously With High-Filtration-Rate Fluid , 2008 .

[8]  Emmanuel M Detournay,et al.  Modeling fracture initiation and propagation from a pressurized hole: A dislocation-based approach , 1995 .

[9]  Mohamed Y. Soliman,et al.  Near Wellbore Stress Analysis and Wellbore Strengthening for Drilling Depleted Formations , 2007 .

[10]  Hiroshi Tada,et al.  The stress analysis of cracks handbook , 2000 .

[11]  John Cook,et al.  A Comprehensive Experimental Study on Wellbore Strengthening , 2014 .

[12]  Eric van Oort,et al.  Stabilizing the wellbore to prevent lost circulation , 2011 .

[13]  Nobuo Morita,et al.  Theory of lost circulation pressure , 1990 .

[14]  Mark W. Alberty,et al.  A Physical Model for Stress Cages , 2004 .

[15]  Dale E. Jamison,et al.  Geomechanics of Lost-Circulation Events and Wellbore-Strengthening Operations , 2015 .

[16]  M. W. Alberty,et al.  Drilling Fluids for Wellbore Strengthening , 2004 .

[17]  Kenneth E. Gray,et al.  Finite-Element Studies of Hoop-Stress Enhancement for Wellbore Strengthening , 2015 .

[18]  E. C. Onyia,et al.  Experimental Data Analysis of Lost-Circulation Problems During Drilling With Oil-Based Mud , 1994 .

[19]  M. W. Alberty,et al.  Fracture Gradients in Depleted Reservoirs - Drilling Wells in Late Reservoir Life , 2001 .

[20]  C. Arlanoglu.  Casing drilling and modeling of smear effect , 2011 .

[21]  Mark W. Sanders,et al.  A New Treatment for Wellbore Strengthening in Shale , 2007 .

[22]  P. A. Boyd,et al.  A New Approach to Preventing Lost Circulation While Drilling , 1992 .

[23]  Mohamed Y. Soliman,et al.  Fractured Wellbore Stress Analysis: Sealing Cracks to Strengthen a Wellbore , 2007 .