Influence of milling time on the synthesis, microstructure and mechanical properties of ZrB2SiCZrO2f ceramic composites

[1]  W. Zhi,et al.  Microstructure and mechanical properties of hot-pressed ZrB2–SiC–ZrO2f ceramics with different sintering temperatures , 2012 .

[2]  W. Zhi,et al.  Microstructure and mechanical properties of ZrB2–SiC–ZrO2f ceramic , 2011 .

[3]  D. Bučevac,et al.  Pressureless sintering of internally synthesized SiC-TiB2 composites with improved fracture strength , 2011 .

[4]  Jingxian Zhang,et al.  Processing and properties of ZrB2–SiC composites obtained by aqueous tape casting and hot pressing , 2011 .

[5]  M. Can,et al.  Effect of milling time on the synthesis of magnetite nanoparticles by wet milling , 2010 .

[6]  Lai-fei Cheng,et al.  Fabrication of SiCw reinforced ZrB2-based ceramics , 2010 .

[7]  R. Asthana,et al.  Joining and integration of ZrB2-based ultra-high temperature ceramic composites using advanced brazing technology , 2010 .

[8]  V. Jayaram,et al.  Fabrication and mechanisms of densification of ZrB2-based ultra high temperature ceramics by reactive hot pressing , 2010 .

[9]  K. Kibble,et al.  Effects of ball milling time on the synthesis and consolidation of nanostructured WC–Co composites , 2009 .

[10]  Wei Zhang,et al.  Effect of graphite flake orientation on microstructure and mechanical properties of ZrB2–SiC–graphite composite , 2009 .

[11]  Jiecai Han,et al.  Microstructural feature and thermal shock behavior of hot-pressed ZrB2–SiC–ZrO2 composite , 2009 .

[12]  William G. Fahrenholtz,et al.  Thermal shock resistance of ZrB2 and ZrB2–30% SiC , 2008 .

[13]  Yu Zhou,et al.  Influence factors of ball milling process on BE powder for reaction sintering of TiB/Ti–4.0Fe–7.3Mo composite , 2007 .

[14]  H. Hsiang,et al.  Characteristics of yttria stabilized tetragonal zirconia powder used in optical fiber connector ferrule , 2005 .

[15]  Li Lu,et al.  Formation of magnesium nanocomposite via mechanical milling , 2004 .

[16]  C. Chou,et al.  YNbO4-addition on the fracture toughness of ZrO2(3Y) ceramics , 2001 .

[17]  M. K. Naskar,et al.  Zirconia fibre mats prepared by a sol-gel spinning technique , 2001 .

[18]  Y. B. Lee,et al.  Self-propagating high-temperature synthesis of ZrB2 in the system ZrO2-B2O3-Fe2O3-Al , 2000 .

[19]  Y. Champion,et al.  Structural analysis of phases and heterophase interfaces in the zirconium–boron system , 1998 .

[20]  H. Tomioka,et al.  Preparation of continuous zirconia fibres from polyzirconoxane synthesized by the facile one-pot reaction , 1998 .

[21]  T. Yogo.  Synthesis of polycrystalline zirconia fibre with organozirconium precursor , 1990 .

[22]  M. Yoshimura,et al.  Calibration Curve for Quantitative Analysis of the Monoclinic‐Tetragonal ZrO2 System by X‐Ray Diffraction , 1984 .