A miniature fuel reformer system for portable power sources

Abstract A miniature methanol reformer system has been designed and built to technology readiness level exceeding a laboratory prototype. It is intended to feed fuel cells with electric power up to 100 W and contains a complete setup of the technological elements: catalytic reforming and PROX reactors, a combustor, evaporators, actuation and sensing elements, and a control unit. The system is engineered not only for performance and quality of the reformate, but also for its lightweight and compact design, seamless integration of elements, low internal electric consumption, and safety. In the paper, the design of the system is presented by focussing on its miniaturisation, integration, and process control.

[1]  Xi Li,et al.  Thermal management of an independent steam reformer for a solid oxide fuel cell with constrained generalized predictive control , 2012 .

[2]  A. Basile,et al.  Methanol steam reforming for hydrogen generation via conventional and membrane reactors: A review , 2014 .

[3]  Shwin-Chung Wong,et al.  A novel passive feeding method for methanol steam reformers , 2011 .

[4]  Eugenio Calò,et al.  Small stationary reformers for H2 production from hydrocarbons , 2010 .

[5]  Shin-Kun Ryi,et al.  A multi-membrane reformer for the direct production of hydrogen via a steam-reforming reaction of methane , 2012 .

[6]  Akira Igarashi,et al.  A miniaturized methanol reformer with Si-based microreactor for a small PEMFC , 2006 .

[7]  Saad Mekhilef,et al.  Comparative study of different fuel cell technologies , 2012 .

[8]  Chang-Soo Kim,et al.  Development of microchannel methanol steam reformer , 2004 .

[9]  Jurka Batista,et al.  CuO–CeO2 mixed oxide catalysts for the selective oxidation of carbon monoxide in excess hydrogen , 2001 .

[10]  Taegyu Kim,et al.  Micro methanol reformer combined with a catalytic combustor for a PEM fuel cell , 2009 .

[11]  Evan O. Jones,et al.  Microfuel processor for use in a miniature power supply , 2002 .

[12]  Chunxi Zhang,et al.  Study on a compact methanol reformer for a miniature fuel cell , 2011 .

[13]  S. Kær,et al.  Control and experimental characterization of a methanol reformer for a 350 W high temperature polymer electrolyte membrane fuel cell system , 2011 .

[14]  Benjamin A. Wilhite,et al.  Autothermal hydrogen generation from methanol in a ceramic microchannel network , 2010 .

[15]  Yong Wang,et al.  Review of developments in portable hydrogen production using microreactor technology. , 2004, Chemical reviews.

[16]  Ronghuan He,et al.  Integration of high temperature PEM fuel cells with a methanol reformer , 2005 .

[17]  Jacob N. Chung,et al.  Design and test of a miniature hydrogen production reactor integrated with heat supply, fuel vaporization, methanol-steam reforming and carbon monoxide removal unit , 2012 .

[18]  Stanko Hočevar,et al.  A comparative study of Pt/γ-Al2O3, Au/α-Fe2O3 and CuO–CeO2 catalysts for the selective oxidation of carbon monoxide in excess hydrogen , 2002 .

[19]  Gregor Dolanc,et al.  Modeling of methanol decomposition on Pt/CeO2/ZrO2 catalyst in a packed bed microreactor , 2014 .

[20]  G. T. Yeh,et al.  Design of compact methanol reformer for hydrogen with low CO for the fuel cell power generation , 2012 .