Characteristic Analysis and Simulated Test of Hybrid Bearing with the Introduction of Piezoelectric Controller

A novel hybrid bearing with the introduction of piezoelectric controller and tilting pads to control vibration actively is proposed in this paper, and the feasibility of this scheme is verified by theoretical calculation and experimental data. This scheme can control the vibration of bearing actively by using the electromechanical characteristics of piezoelectric ceramic transducer (PZT) components. The static internal character of PZT and static external characteristic of piezoelectric control component are analyzed, and the calculation equations of preload coefficient and driving force of the new bearing are given. The simulation setup of the new bearing is designed and developed. The data representing the relationship of displacement of pad pivot, driving force, voltage, and the simulation stiffness of liquid film are obtained in the test, and the feature parameters of piezoelectric control component are amended to analyze the relationship between preload coefficient of the bearing and driving voltage. The proposed new bearing has the function of controlling preload actively. The theoretical and experimental research results provide essential guidance for the detail design of this new bearing and also provide a new idea for the vibration control of high speed rotor systems.

[1]  Hua Xu,et al.  A Novel Active Online Electromagnetic Balancing Method—Principle and Structure Analysis , 2012 .

[2]  Carsten W. Scherer,et al.  Performance Enhancement for AMB Systems Using Unstable $H_{\infty}$ Controllers , 2011, IEEE Transactions on Control Systems Technology.

[3]  Yi Lu,et al.  An Analytical Complete Model of Tilting-Pad Journal Bearing Considering Pivot Stiffness and Damping , 2011 .

[4]  Ilmar F. Santos,et al.  Control System Design for Active Lubrication With Theoretical and Experimental Examples , 2003 .

[5]  Ilmar F. Santos,et al.  The Influence of Injection Pockets on the Performance of Tilting-Pad Thrust Bearings—Part II: Comparison Between Theory and Experiment , 2007 .

[6]  Ming-Hui Chu,et al.  Design and Simulation of a Neural-PD Controller for Automatic Balancing of Rotor , 2006, ISNN.

[7]  Y. Suzuki Acceleration feedforward control for active magnetic bearing systems excited by ground motion , 1998 .

[8]  Stefano Morosi,et al.  Active lubrication applied to radial gas journal bearings. Part 1: Modeling , 2011 .

[9]  Valder Steffen,et al.  Modal Active Vibration Control of a Rotor Using Piezoelectric Stack Actuators , 2007 .

[10]  Zhiwei Wang,et al.  Research on error averaging effect of hydrostatic guideways , 2012 .

[11]  Satish C. Sharma,et al.  Performance of membrane compensated multirecess hydrostatic/hybrid flexible journal bearing system considering various recess shapes , 2004 .

[12]  Michel Fillon,et al.  Numerical modelling of hydrostatic lift pockets in hydrodynamic journal bearings – Application to low speed working conditions of highly loaded tilting pad journal bearings , 2013 .

[13]  Rodrigo Nicoletti,et al.  Linear and non-linear control techniques applied to actively lubricated journal bearings , 2003 .

[14]  Guo Li Different Geometric Configurations Research of High Speed Hybrid Bearings , 2003 .

[15]  Luis San Andrés,et al.  Turbulent-flow hydrostatic bearings: Analysis and experimental results , 1995 .

[16]  R.A.J. van Ostayen,et al.  Analytical solution for tilted hydrostatic multi-pad thrust bearings of infinite length , 1997 .

[17]  Moe Key A round-trip piezoelectric actuator with variable step and large displacement , 2010 .

[18]  Wei-Hua Chieng,et al.  Optimum magnetic bearing design considering performance limitations , 1996 .

[19]  김태호,et al.  Analysis of Tilting Pad Journal Bearings Considering Pivot Stiffness , 2014 .

[20]  Wen Guang Status and Developing Trend of NC Technology , 2003 .

[21]  Ilmar F. Santos,et al.  The influence of Injection Pockets on the Performance of Tilting-Pad Thrust Bearings: Part I - Theory , 2006 .

[22]  R. Sinhasan,et al.  Comparative study of the performance of six-pocket and four-pocket hydrostatic/hybrid flexible journal bearings , 1995 .

[23]  Hua Xu,et al.  Study on the Static Performance and Stability of a Water-Lubricated Hybrid Bearing with Circumferential Grooves and Stepped Recesses Considering the Influence of Recess Sizes , 2014 .

[24]  Carsten W. Scherer,et al.  Synthesis and implementation of gain-scheduling and LPV controllers for an AMB system , 2012, Autom..

[25]  Stephen William Dyer Adaptive optimal control of active balancing systems for high-speed rotating machinery. , 1999 .

[26]  Si-yong Liu,et al.  Vibration characteristics of rotor system with tilting-pad journal bearing of elastic and damped pivots , 2015 .