Form-finding method for the target configuration under dead load of a new type of spatial self-anchored hybrid cable-stayed suspension bridges

[1]  D P Billington,et al.  THEORY AND HISTORY OF SUSPENSION BRIDGE DESIGN FROM 1823 TO 1940. DISCUSSION , 1993 .

[2]  Patrick Paultre,et al.  Dynamic investigation of a hybrid suspension and cable‐stayed bridge , 2000 .

[3]  Ki-Seok Kim,et al.  Analysis of target configurations under dead loads for cable-supported bridges , 2001 .

[4]  Kalyanmoy Deb,et al.  A fast and elitist multiobjective genetic algorithm: NSGA-II , 2002, IEEE Trans. Evol. Comput..

[5]  Ho-Kyung Kim,et al.  Non-linear shape-finding analysis of a self-anchored suspension bridge , 2002 .

[6]  Dorian Janjic,et al.  OPTIMIZATION OF CABLE TENSIONING IN CABLE-STAYED BRIDGES , 2003 .

[7]  Issam E. Harik,et al.  Roebling Suspension Bridge. II: Ambient Testing and Live-Load Response , 2004 .

[8]  Issam E. Harik,et al.  Roebling Suspension Bridge. I: Finite-Element Model and Free Vibration Response , 2004 .

[9]  Ho-Kyung Kim,et al.  Determination of hanger installation procedure for a self-anchored suspension bridge , 2006 .

[10]  Sung-Won Kang,et al.  Optimization of tensioning strategy for asymmetric cable-stayed bridge and its effect on construction process , 2008 .

[11]  Domenico Bruno,et al.  A Parametric Study on the Dynamic Behavior of Combined Cable-Stayed and Suspension Bridges under Moving Loads , 2009 .

[12]  George T. Michaltsos,et al.  A mathematical model for a combined cable system of bridges , 2010 .

[13]  Jing Qiu,et al.  Analysis of Structural Parameters of Cable-Stayed Suspension Bridges , 2010 .

[14]  Chang-Huan Kou,et al.  Static Analysis of a Self-anchored Cable-stayed-suspension Bridge with Optimal Cable Tensions , 2010 .

[15]  Damiano Pasini,et al.  A non-dominated sorting hybrid algorithm for multi-objective optimization of engineering problems , 2011 .

[16]  A. A. El Damatty,et al.  Determination of optimum post-tensioning cable forces of cable-stayed bridges , 2012 .

[17]  Jose Antonio Lozano-Galant,et al.  Forward Algorithm for the construction control of cable-stayed bridges built on temporary supports , 2012 .

[18]  Ho-Kyung Kim,et al.  Efficient combination of a TCUD method and an initial force method for determining initial shapes of cable-supported bridges , 2012 .

[19]  Franco Bontempi,et al.  Genetic Algorithms for the Dependability Assurance in the Design of a Long‐Span Suspension Bridge , 2012, Comput. Aided Civ. Infrastructure Eng..

[20]  Engin Gülal,et al.  Ambient vibration measurements of the bosphorus suspension bridge by total station and GPS , 2013, Experimental Techniques.

[21]  Wang Hui-li,et al.  Geometric Nonlinear Analysis of Self-Anchored Cable-Stayed Suspension Bridges , 2013, TheScientificWorldJournal.

[22]  Paolo Lonetti,et al.  Optimum design analysis of hybrid cable-stayed suspension bridges , 2014, Adv. Eng. Softw..

[23]  Myung-Rag Jung,et al.  Improved methods for determining the 3 dimensional initial shapes of cable-supported bridges , 2014 .

[24]  Kalyanmoy Deb,et al.  Customized evolutionary optimization procedure for generating minimum weight compliant mechanisms , 2014 .

[25]  Paolo Lonetti,et al.  Design analysis of the optimum configuration of self-anchored cable-stayed suspension bridges , 2014 .

[26]  Pengzhen Lu,et al.  Optimization Analysis Model of Self-Anchored Suspension Bridge , 2014 .

[27]  Hongping Zhu,et al.  Improved Particle Swarm Optimization-Based Form-Finding Method for Suspension Bridge Installation Analysis , 2015 .

[28]  Yang Song,et al.  Nonlinear modelling of high-speed catenary based on analytical expressions of cable and truss elements , 2015 .

[29]  Hongping Zhu,et al.  New Method for Shape Finding of Self-Anchored Suspension Bridges with Three-Dimensionally Curved Cables , 2015 .

[30]  Alberto M. B. Martins,et al.  Cable stretching force optimization of concrete cable-stayed bridges including construction stages and time-dependent effects , 2015 .

[31]  Aitor Baldomir,et al.  Probabilistic optimization of the main cable and bridge deck of long-span suspension bridges under flutter constraint , 2015 .

[32]  Qing Li,et al.  Multiobjective robust optimization for crashworthiness design of foam filled thin-walled structures with random and interval uncertainties , 2015 .

[33]  Yang Yang,et al.  Three-Dimensional Force Flow Paths and Reinforcement Design in Concrete via Stress-Dependent Truss-Continuum Topology Optimization , 2015 .

[34]  Sun-Gil Gwon,et al.  Three-Dimensional Parabolic Cable Element for Static Analysis of Cable Structures , 2016 .

[35]  Hongping Zhu,et al.  A specific rod model based efficient analysis and design of hanger installation for self-anchored suspension bridges with 3D curved cables , 2016 .

[36]  Matthew Collette,et al.  Example software for paper: "Efficient optimization of reliability-constrained structural design problems including interval uncertainty" , 2016 .

[37]  Yu-Chi Sung,et al.  Application of particle swarm optimisation to construction planning for cable-stayed bridges by the cantilever erection method , 2016 .

[38]  Bin Sun,et al.  Determination of the Reasonable State of Suspension Bridges with Spatial Cables , 2017 .

[39]  Hongping Zhu,et al.  Layout and size optimization of suspension bridges based on coupled modelling approach and enhanced particle swarm optimization , 2017 .

[40]  Hongyou Cao,et al.  Form-finding analysis of suspension bridges using an explicit Iterative approach , 2017 .

[41]  D. Frangopol,et al.  Novel Technique for Configuration Transformation of 3D Curved Cables of Suspension Bridges: Application to the Dongtiao River Bridge , 2018, Journal of Performance of Constructed Facilities.

[42]  Xiaoming Wang,et al.  Innovative Design and Construction Process for a Self-Anchored Suspension and Cable-Stayed Cooperation Bridge in China , 2018 .

[43]  Bin Sun,et al.  Optimization of cable pre-tension forces in long-span cable-stayed bridges considering the counterweight , 2018, Engineering Structures.

[44]  Huzhi Zhang,et al.  Experimental Investigation on Stress Redistribution and Load-Transfer Paths of Shear Walls with Openings , 2018, Journal of Structural Engineering.

[45]  Wenmin Zhang,et al.  An iterative calculation method for hanger tensions and the cable shape of a suspension bridge based on the catenary theory and finite element method , 2018, Advances in Structural Engineering.

[46]  Zhao Liu,et al.  An analytical algorithm for the pylon saddle pushing stage and distance during the suspension bridge construction , 2019, Advances in Structural Engineering.

[47]  Xiaomin Wang,et al.  Accelerated Construction of Self-Anchored Suspension Bridge Using Novel Tower-Girder Anchorage Technique , 2019, Journal of Bridge Engineering.

[48]  Haibin Zhu,et al.  Secure and economical multi-cloud storage policy with NSGA-II-C , 2019, Appl. Soft Comput..

[49]  Zhongguo John Ma,et al.  Experiment on the Behavior of a Self-Anchored Suspension and Cable-Stayed Hybrid Bridge during Structural Transformation , 2020 .

[50]  Wang Huan,et al.  Process-independent construction stage analysis of self-anchored suspension bridges , 2020 .

[51]  Alberto M. B. Martins,et al.  Optimization of cable-stayed bridges: A literature survey , 2020, Adv. Eng. Softw..