The Influence of Refined Urban Morphological Parameters on Dynamical and Thermal Fields in a Single-Layer Urban Canopy Model

In this study, localised and non-uniform urban morphology (UM) and urban fraction (UF) parameters are implemented in a single-layer urban canopy scheme in the Weather Research and Forecasting (WRF) mesoscale meteorological model. The purpose of this research is to evaluate the effect of the refined parameterisation scheme on the simulation of dynamic and thermal fields in the urban canopy of the Guangzhou metropolitan area. The results showed that, compared with the default urban canopy parameters of the WRF model, using the localised UM parameters resulted in the most significant improvement in the 10 m wind speed simulation. In urban districts, the mean bias between the observed and simulated 10 m wind speed was reduced significantly by 59% from 2.63 m/s to 1.09 m/s during the daytime. For the thermal environment simulation during the daytime, higher UF and UM values resulted in lower surface albedos and generated narrower street canyons compared with the default modelling setting, which caused more heat to be trapped in the urban canopy and ultimately led to an increase in the surface skin temperature (TSK) and a largely increased ground heat flux (GRD). As a result, at night, more heat was transferred from the ground to the surface, producing a higher TSK. The effect of the localised UF on the sensible heat flux (HFX) was closely related to the near-surface temperature gradient. The UM caused the HFX to increase during the daytime, which was related to the near-surface heat exchange coefficient in the lower model layers. As the high-resolution UM significantly altered the urban geometry, the dynamic environment simulation resulted in a large increase in friction velocity and a decrease in wind speed.

[1]  P. Chan,et al.  Impacts of High-Resolution Urban Canopy Parameters within the WRF Model on Dynamical and Thermal Fields over Guangzhou, China , 2019, Journal of Applied Meteorology and Climatology.

[2]  Liang Chen,et al.  High-resolution dataset of urban canopy parameters for Beijing and its application to the integrated WRF/Urban modelling system , 2019, Journal of Cleaner Production.

[3]  Guangjin Tian,et al.  Modeling the Warming Impact of Urban Land Expansion on Hot Weather Using the Weather Research and Forecasting Model: A Case Study of Beijing, China , 2018, Advances in Atmospheric Sciences.

[4]  G. F. Garuma,et al.  Review of urban surface parameterizations for numerical climate models , 2017, Urban Climate.

[5]  M. Kanda,et al.  Urban roughness parameters estimation from globally available datasets for mesoscale modeling in megacities , 2017 .

[6]  Hankui K. Zhang,et al.  Using the 500 m MODIS Land Cover Product to Derive a Consistent Continental Scale 30 m Landsat Land Cover Classification , 2017 .

[7]  Haidar Fadhil Abbas Al-Qrimli,et al.  Impact of urbanization level on the interactions of urban area, the urban climate, and human thermal comfort , 2017 .

[8]  A. Martilli,et al.  Assessment of a high resolution annual WRF-BEP/CMAQ simulation for the urban area of Madrid (Spain) , 2016 .

[9]  Yupeng Wang,et al.  Characterizing urban heat island in Montreal (Canada)—Effect of urban morphology , 2015 .

[10]  Hiroyuki Kusaka,et al.  Impact of an improved WRF urban canopy model on diurnal air temperature simulation over northern Taiwan , 2015 .

[11]  M. Mohan,et al.  Impact of urbanization and land-use/land-cover change on diurnal temperature range: a case study of tropical urban airshed of India using remote sensing data. , 2015, The Science of the total environment.

[12]  Y. Yamagata,et al.  Moderation of Summertime Heat Island Phenomena via Modification of the Urban Form in the Tokyo Metropolitan Area , 2014 .

[13]  Fei Chen,et al.  Development and evaluation of a mosaic approach in the WRF‐Noah framework , 2013 .

[14]  O. Jorba,et al.  High Resolution Simulation of the Variability of Surface Energy Balance Fluxes Across Central London with Urban Zones for Energy Partitioning , 2013, Boundary-Layer Meteorology.

[15]  G. Carmichael,et al.  Sensitivity of predicted pollutant levels to urbanization in China , 2012 .

[16]  Alexis K.H. Lau,et al.  Evaluation of nonlocal and local planetary boundary layer schemes in the WRF model , 2012 .

[17]  C. Grimmond,et al.  Characterization of Energy Flux Partitioning in Urban Environments: Links with Surface Seasonal Properties , 2012 .

[18]  J. Smith,et al.  Analyzing the Sensitivity of WRF's Single-Layer Urban Canopy Model to Parameter Uncertainty Using Advanced Monte Carlo Simulation , 2011 .

[19]  M. J. Best,et al.  Trade‐offs and responsiveness of the single‐layer urban canopy parametrization in WRF: An offline evaluation using the MOSCEM optimization algorithm and field observations , 2010 .

[20]  Zhiyong Wu,et al.  WRF/CHEM modeling of impacts of weather conditions modified by urban expansion on secondary organic aerosol formation over Pearl River Delta , 2009 .

[21]  Limin Yang,et al.  Quantification of land use/land cover changes in Pearl River Delta and its impact on regional climate in summer using numerical modeling , 2009 .

[22]  Fei Chen,et al.  Formation of horizontal convective rolls in urban areas , 2008 .

[23]  N. Grimm,et al.  Global Change and the Ecology of Cities , 2008, Science.

[24]  G. Meehl,et al.  The Importance of Land-Cover Change in Simulating Future Climates , 2005, Science.

[25]  S. Carpenter,et al.  Global Consequences of Land Use , 2005, Science.

[26]  T. Oke,et al.  Thermal remote sensing of urban climates , 2003 .

[27]  A. Arnfield.  Two decades of urban climate research: a review of turbulence, exchanges of energy and water, and the urban heat island , 2003 .

[28]  H. Kondo,et al.  A Simple Single-Layer Urban Canopy Model For Atmospheric Models: Comparison With Multi-Layer And Slab Models , 2001 .

[29]  Valéry Masson,et al.  A Physically-Based Scheme For The Urban Energy Budget In Atmospheric Models , 2000 .

[30]  Chang Min.  Impact of refined land-cover data on WRF performance over the Pearl River Delta region,China , 2014 .

[31]  Liu Hao-rui.  APPLICATION OF WRF/UCM IN THE SIMULATION OF A HEAT WAVE EVENT AND URBAN HEAT ISLAND AROUND GUANGZHOU CITY , 2010 .