Multiobject Reliability Analysis of Turbine Blisk with Multidiscipline under Multiphysical Field Interaction

To study accurately the influence of the deformation, stress, and strain of turbine blisk on the performance of aeroengine, the comprehensive reliability analysis of turbine blisk with multiple disciplines and multiple objects was performed based on multiple response surface method (MRSM) and fluid-thermal-solid coupling technique. Firstly, the basic thought of MRSM was introduced. And then the mathematical model of MRSM was established with quadratic polynomial. Finally, the multiple reliability analyses of deformation, stress, and strain of turbine blisk were completed under multiphysical field coupling by the MRSM, and the comprehensive performance of turbine blisk was evaluated. From the reliability analysis, it is demonstrated that the reliability degrees of the deformation, stress, and strain for turbine blisk are 0.9942, 0.9935, 0.9954, and 0.9919, respectively, when the allowable deformation, stress, and strain are 3.7 × 10−3 m, 1.07 × 109 Pa, and 1.12 × 10−2 m/m, respectively; besides, the comprehensive reliability degree of turbine blisk is 0.9919, which basically satisfies the engineering requirement of aeroengine. The efforts of this paper provide a promising approach method for multidiscipline multiobject reliability analysis.

[1]  Cheng-Wei Fei,et al.  Probabilistic Design of HPT Blade-Tip Radial Running Clearance with Distributed Collaborative Response Surface Method , 2015 .

[2]  Cheng-Wei Fei,et al.  Nonlinear dynamic probabilistic design of turbine disk-radial deformation using extremum response surface method-based support vector machine of regression , 2015 .

[3]  Cheng-Wei Fei,et al.  Distributed collaborative probabilistic design for turbine blade-tip radial running clearance using support vector machine of regression , 2014 .

[4]  Cheng-Wei Fei,et al.  Reliability and sensitivity analyses of HPT blade-tip radial running clearance using multiply response surface model , 2014 .

[5]  Chengen Wang.  Integrated aerodynamic design and analysis of turbine blades , 2014, Adv. Eng. Softw..

[6]  Song Ying.  Multi-Objective and Multi-Disciplinary Design Optimization of High Temperature Blade Based on Heat-Fluid-Solid Coupling Analysis , 2014 .

[7]  Cheng-Wei Fei,et al.  Nonlinear Dynamic Probabilistic Analysis for Turbine Casing Radial Deformation Using Extremum Response Surface Method Based on Support Vector Machine , 2013 .

[8]  Ahmadreza Pishevar,et al.  Aerodynamic shape optimization of hovering rotor blades using a coupled free wake–CFD and adjoint method , 2013 .

[9]  Tian Chao,et al.  Extremum Response Surface Method for Casing Radial Deformation Probabilistic Analysis , 2013, J. Aerosp. Inf. Syst..

[10]  J. Park,et al.  Effects of turbine blade tip shape on total pressure loss and secondary flow of a linear turbine cascade , 2012 .

[11]  Bak Kong Low,et al.  Probabilistic analysis of underground rock excavations using response surface method and SORM , 2011 .

[12]  Dianyin Hu,et al.  Probabilistic design for turbine disk at high temperature , 2011 .

[13]  Murat Emre Kartal,et al.  Probabilistic nonlinear analysis of CFR dams by MCS using Response Surface Method , 2011 .

[14]  Jiao Wang,et al.  FE Analysis on Contact Properties between Root- Blade and Slot-Disc , 2011 .

[15]  Clare K Fitzpatrick,et al.  Combined probabilistic and principal component analysis approach for multivariate sensitivity evaluation and application to implanted patellofemoral mechanics. , 2011, Journal of biomechanics.

[16]  Bing Hui Jia,et al.  Study on Effect of Rotor Vibration on Tip Clearance Variation and Fast Active Control of Tip Clearance , 2010 .

[17]  Andrea Dall'Asta,et al.  Probabilistic analysis for design assessment of continuous steel-concrete composite girders , 2010 .

[18]  Yue Zhufeng.  Thermal-solid coupling analysis of centrifugal compressor , 2009 .

[19]  Shaker A. Meguid,et al.  FE analysis of geometry effects of an artificial bird striking an aeroengine fan blade , 2008 .

[20]  Zhou Jian-xing.  3-D numerical analysis of the tip clearance of an aero-engine high pressure turbine , 2008 .

[21]  Toshiya Nakamura,et al.  Probabilistic transient thermal analysis of an atmospheric reentry vehicle structure , 2006 .

[22]  Bruce M. Steinetz,et al.  High-pressure-turbine clearance control systems: Current practices and future directions , 2004 .

[23]  Bruce M. Steinetz,et al.  Test Rig for Evaluating Active Turbine Blade Tip Clearance Control Concepts , 2003 .

[24]  P. Pilidis,et al.  Models for predicting tip clearance changes in gas turbines , 1983 .