Fracture Behavior of Ion-Nitrided AISI 4140 Steel in accordance with Variable Applied Current Density

In this study, the fracture behavior of AISI 4140 low-alloy steel nitrided with respect to the applied current density was investigated. A series of rotary bending fatigue tests were performed with various loads (350, 400, 450, and 500 N) at a constant rotational speed of 2000 rpm. The results show that the increase in the fatigue strength of the steel (up to 35%) strongly depends on the compound layer formed during the nitriding process. In addition, the compressive stress generated by nitrogen-ion bombardment and implantation had an advantageous effect on the substantially enhanced fatigue strength; it acted as a protective layer to secure the surface from any external impact. It was found that fatigue strength is increased with increasing fracture toughness index on the surface on the sample. It had the highest fracture toughness index and fatigue strength at about 0.85 mA/cm2 of applied current. The findings of this study will pave the way for applications in related industries.

[1]  Hai-dou Wang,et al.  Bending Fatigue Behaviors Analysis and Fatigue Life Prediction of 20Cr2Ni4 Gear Steel with Different Stress Concentrations near Non-metallic Inclusions , 2019, Materials.

[2]  Yilong Liang,et al.  Study of the Surface Integrity and High Cycle Fatigue Performance of AISI 4340 Steel after Composite Surface Modification , 2019, Metals.

[3]  Hyun Jun Park,et al.  Wear Properties of a Sulfnitrided Layer Formed on AISI 4140 Steel by Using Plasma Treatments , 2019, Journal of the Korean Physical Society.

[4]  H.M.E. Ramos,et al.  Influence of plasma nitriding pressure on microabrasive wear resistance of a microalloyed steel , 2019, Journal of Materials Research and Technology.

[5]  İ. Hacısalihoğlu,et al.  Effects of shot peening pre-treatment and plasma nitriding parameters on the structural, mechanical and tribological properties of AISI 4140 low-alloy steel , 2019, Surface and Coatings Technology.

[6]  B. Liu,et al.  Enhancing heavy load wear resistance of AISI 4140 steel through the formation of a severely deformed compound-free nitrided surface layer , 2018, Surface and Coatings Technology.

[7]  F. El-Hossary,et al.  Tribo-Mechanical and Electrochemical Properties of Carbonitrided 316 Austenitic Stainless Steel by rf Plasma for Biomedical Applications , 2018 .

[8]  M. Sitarz,et al.  Investigation of nitrogen transport in active screen plasma nitriding processes – Uphill diffusion effect , 2018, Journal of Molecular Structure.

[9]  L. Ćurković,et al.  Statistical analysis of Vickers indentation fracture toughness of Y-TZP ceramics , 2017 .

[10]  O. Hopperstad,et al.  On the description of ductile fracture in metals by the strain localization theory , 2017, International Journal of Fracture.

[11]  Pasquale Cavaliere,et al.  Multi-objective optimization of steel nitriding , 2016 .

[12]  I. Baumvol,et al.  Influence of current density on phase formation and tribological behavior of plasma nitrided AISI H13 steel , 2016 .

[13]  I. Černý,et al.  Fatigue Strength of Laser Hardened 42CrMo4 Steel Considering Effects of Compressive Residual Stresses on Short Crack Growth , 2014 .

[14]  C. Alves,et al.  Cathodic cage plasma nitriding (CCPN) of austenitic stainless steel (AISI 316): Influence of the different ratios of the (N2/H2) on the nitrided layers properties , 2012 .

[15]  I. Lee,et al.  Fatigue behavior of plasma radical nitrided SCM435 steel in super-long life regime , 2011 .

[16]  I. Campos,et al.  Fracture toughness evaluation using Palmqvist crack models on AISI 1045 borided steels , 2008 .

[17]  Erdinc Kaluc,et al.  Effect of the ion nitriding surface hardening process on fatigue behavior of AISI 4340 steel , 2008 .

[18]  G. Quinn.  Fracture Toughness of Ceramics by the Vickers Indentation Crack Length Method: A Critical Review , 2007 .

[19]  S. Raman,et al.  Influence of plasma nitriding on plain fatigue and fretting fatigue behaviour of AISI 304 austenitic stainless steel , 2007 .

[20]  S. .,et al.  The effect of nitriding on fatigue strength of structural alloys , 2007 .

[21]  Y. Verreman,et al.  Fatigue strength improvement of a 4140 steel by gas nitriding: Influence of notch severity , 2006 .

[22]  M. Güden,et al.  Microhardness and fracture toughness of dental materials by indentation method. , 2006, Journal of biomedical materials research. Part B, Applied biomaterials.

[23]  K. Bamzai,et al.  Effect of ion irradiation on dielectric and mechanical characteristics of ErFeO3 single crystals , 2005 .

[24]  I. Kaymaz,et al.  A repair process for fatigue damage using plasma nitriding , 2004 .

[25]  Y. Verreman,et al.  Axial fatigue of a gas‐nitrided quenched and tempered AISI 4140 steel: effect of nitriding depth , 2003 .

[26]  A. Çelik,et al.  Effects of various gas mixtures on plasma nitriding behavior of AISI 5140 steel , 2002 .

[27]  A. Alsaran.  Determination of tribological properties of ion-nitrided AISI 5140 steel , 2002 .

[28]  A. Çelik,et al.  Investigation of compound layer formed during ion nitriding of AISI 4140 steel , 1996 .

[29]  A. Çelik,et al.  Improvement of the fatigue strength of AISI 4140 steel by an ion nitriding process , 1995 .

[30]  C. Galassi,et al.  Correlation between casting parameters and mechanical properties of an Al2O3-ZrO2 composite , 1993 .

[31]  Asish Ghosh,et al.  Indentation Fracture Toughness of Sintered Silicon Carbide in the Palmqvist Crack Regime , 1989 .

[32]  K. Niihara,et al.  A fracture mechanics analysis of indentation-induced Palmqvist crack in ceramics , 1983 .

[33]  T. Bell,et al.  The fatigue characteristics of Plasma Nitrided three Pct Cr-Mo steel , 1982 .

[34]  J. Martin,et al.  Fatigue failure mechanisms in a nitrided En 41B steel , 1978 .

[35]  J. Martin,et al.  Residual stress distribution in nitrided En41B steel as function of case depth , 1977 .