论文信息 - The Design of a Combined Control Structure to Prevent the Rollover of Heavy Vehicles

The Design of a Combined Control Structure to Prevent the Rollover of Heavy Vehicles

In this paper a combined control structure to decrease the rollover risk of heavy vehicles is developed. In this structure active anti-roll bars are combined with an active brake control. Selecting the forward velocity and the lateral load transfer at the rear as scheduling parameters, a linear parameter varying model is constructed. In the control design the changes in the forward velocity, the performance specifications and the model uncertainties are taken into consideration. The control mechanism is demonstrated in various maneuver situations.

Péter Gáspár | István Szászi | Jozsef Bokor

[1] Youngjin Park,et al. ACTIVE ROLL MOMENT DISTRIBUTION BASED ON PREDICTIVE CONTROL , 1995 .

[2] Dirk Odenthal,et al. Nonlinear steering and braking control for vehicle rollover avoidance , 1999, 1999 European Control Conference (ECC).

[3] David Cebon,et al. Interaction Between Heavy Vehicles and Roads , 1993 .

[4] David J. Cole,et al. Optimal Roll Control of a Single-Unit Lorry , 1996 .

[5] A. Packard,et al. Robust performance of linear parametrically varying systems using parametrically-dependent linear feedback , 1994 .

[6] Dirk Odenthal,et al. Damping of vehicle roll dynamics by gain scheduled active steering , 1999, 1999 European Control Conference (ECC).

[7] Gary J. Balas,et al. Robustness and performance tradeoffs in control design for flexible structures , 1990, 29th IEEE Conference on Decision and Control.

[8] László Palkovics,et al. Roll-over prevention system for commercial vehicles - additional sensorless function of the electronic brake system , 1999 .

[9] David Cebon,et al. Active Roll Control of Single Unit Heavy Road Vehicles , 2003 .

[10] Huei Peng,et al. Differential-Braking-Based Rollover Prevention for Sport Utility Vehicles with Human-in-the-loop Evaluations , 2001 .

[11] Masato Abe. A study on effects of roll moment distribution control in active suspension on improvement of limit performance of vehicle handling , 1991 .

[12] David John,et al. Active Roll Control of Articulated Heavy Vehicles , 2000 .