Moisture-induced cracking in a flexural bilayer with application to historical paintings

[1]  N. Fleck,et al.  Crack channelling mechanisms in brittle coating systems under moisture or temperature gradients , 2020, International Journal of Fracture.

[2]  Ł. Bratasz,et al.  Fracture saturation in paintings makes them less vulnerable to environmental variations in museums , 2020, Heritage Science.

[3]  Yu Song,et al.  Comparison of three 3D scanning techniques for paintings, as applied to Vermeer’s ‘Girl with a Pearl Earring’ , 2019, Heritage Science.

[4]  A. Jorissen,et al.  Hygro-mechanical response of oak wood cabinet door panels under relative humidity fluctuations , 2018, Heritage Science.

[5]  Ł. Bratasz,et al.  Crack Saturation as a Mechanism of Acclimatization of Panel Paintings to Unstable Environments , 2018, Studies in Conservation.

[6]  A. Jorissen,et al.  Fracture behaviour of historic and new oak wood , 2018, Wood Science and Technology.

[7]  L. Pauchard,et al.  Crack opening: from colloidal systems to paintings. , 2017, Soft matter.

[8]  V. D. O. Sluis,et al.  Effect of residual stress on the delamination response of film-substrate systems under bending , 2016 .

[9]  L. Pauchard,et al.  Painting cracks: A way to investigate the pictorial matter , 2016 .

[10]  M. Łukomski,et al.  Mechanism of craquelure pattern formation on panel paintings , 2016 .

[11]  G. Gregori Conservation and restoration of two wall painting fragments by Bernardino Luini . An intervention about frescoes torn and transferred on wooden boards and conserved in the Pinacoteca di Brera (Milan) , 2016 .

[12]  M. Charalambides,et al.  Prediction of delamination in multilayer artist paints under low amplitude fatigue loading , 2013 .

[13]  Łukasz Bratasz,et al.  Allowable microclimatic variations for painted wood , 2013 .

[14]  M. Łukomski,et al.  Fatigue Damage of the Gesso Layer in Panel Paintings Subjected to Changing Climate Conditions , 2012 .

[15]  S. Linderoth,et al.  Strength and failure modes of ceramic multilayers , 2012 .

[16]  S. Turteltaub,et al.  Damage growth triggered by interface irregularities in thermal barrier coatings , 2009 .

[17]  Norman A. Fleck,et al.  Modelling of fatigue crack tunneling and delamination in layered composites , 2006 .

[18]  Michael Schilling,et al.  DICTATED BY MEDIA: CONSERVATION AND TECHNICAL ANALYSIS OF A 1938 JOAN MIRÓ CANVAS PAINTING , 2006 .

[19]  L. Freund,et al.  Thin Film Materials: Stress, Defect Formation and Surface Evolution , 2004 .

[20]  N. Fleck,et al.  Microbuckle tunnelling in fibre composites , 2000 .

[21]  A. Evans,et al.  Delamination of multilayer thermal barrier coatings , 1999 .

[22]  D. Marshall,et al.  Crack Initiation in Fiber‐Reinforced Brittle Laminates , 1996 .

[23]  James R. Rice,et al.  Elastic Fracture Mechanics Concepts for Interfacial Cracks , 1988 .

[24]  John W. Hutchinson,et al.  Crack Paralleling an Interface Between Dissimilar Materials , 1987 .

[25]  J. Dundurs Discussion: ``Edge-Bonded Dissimilar Orthogonal Elastic Wedges Under Normal and Shear Loading'' (Bogy, D. B., 1968, ASME J. Appl. Mech., 35, pp. 460-466) , 1969 .

[26]  J. Rice A path-independent integral and the approximate analysis of strain , 1968 .

[27]  M. Charalambides,et al.  Cracking in paintings due to relative humidity cycles , 2018 .

[28]  Christina Young Interfacial Interaction of Modern Paint Layers , 2006 .

[29]  Willem D. van Driel,et al.  Characterization and Modelling of Moisture Driven Interface Failures , 2004, Microelectron. Reliab..

[30]  N. Fleck,et al.  Crack tunneling and plane-strain delamination in layered solids , 2004 .

[31]  D. Timm,et al.  Prediction of thermal crack spacing , 2003 .

[32]  Spike Bucklow,et al.  THE DESCRIPTION OF CRAQUELURE PATTERNS , 1997 .

[33]  Colin Forno,et al.  Moiré fringe analysis of cradled panel paintings , 1997 .

[34]  J. Beuth Cracking of thin bonded films in residual tension , 1992 .

[35]  M. Mecklenburg,et al.  Mechanical Behavior of Paintings Subjected to Changes in Temperature and Relative Humidity , 1991 .

[36]  Z. Suo,et al.  Mixed mode cracking in layered materials , 1991 .