论文信息 - Model-based Optimization of Battery Energy Storage Systems

Model-based Optimization of Battery Energy Storage Systems

Abstract A lithium-ion battery model based on the Single Particle Model (SPM) is formulated in MATLAB®. The model consists of a set of first-principle (algebraic and PDEs) and empirical equations that describe the dynamic behaviour of a Li-ion battery system. A sensitivity analysis is performed to identify the most important parameters and variables in the model. To assess the loss of battery capacity through cycling, the reduction of the electrolyte (ethylene carbonate) is considered as a side reaction. The battery is cycled until the end-of-life conditions are met: EODV (end of discharge voltage) below 3 V or capacity fading greater than 20% of the initial capacity of the battery. A gradient-based optimization is performed, identifying the maximum number of cycles within the simulated conditions. The influence of time of discharge, depth-of-discharge and ageing parameters is also assessed.

[1] G. F. Reed,et al. Survey of battery energy storage systems and modeling techniques , 2012, 2012 IEEE Power and Energy Society General Meeting.

[2] Ralph E. White,et al. Development of First Principles Capacity Fade Model for Li-Ion Cells , 2004 .

[3] Richard D. Braatz,et al. Modeling and Simulation of Lithium-Ion Batteries from a Systems Engineering Perspective , 2010 .

[4] Gan Ning,et al. Cycle Life Modeling of Lithium-Ion Batteries , 2004 .

[5] Rolf Findeisen,et al. Optimal charging strategies in lithium-ion battery , 2011, Proceedings of the 2011 American Control Conference.

[6] Ralph E. White,et al. Maximizing the Life of a Lithium-Ion Cell by Optimization of Charging Rates , 2010 .

[7] Ralph E. White,et al. Review of Models for Predicting the Cycling Performance of Lithium Ion Batteries , 2006 .

[8] Lide M. Rodriguez-Martinez,et al. Cycle ageing analysis of a LiFePO4/graphite cell with dynamic model validations: Towards realistic lifetime predictions , 2014 .