Surface-enrichment with hydroxyapatite nanoparticles in stereolithography-fabricated composite polymer scaffolds promotes bone repair.

Fabrication of composite scaffolds using stereolithography (SLA) for bone tissue engineering has shown great promises. However, in order to trigger effective bone formation and implant integration, exogenous growth factors are commonly combined to scaffold materials. In this study, we fabricated biodegradable composite scaffolds using SLA and endowed them with osteopromotive properties in the absence of biologics. First we prepared photo-crosslinkable poly(trimethylene carbonate) (PTMC) resins containing 20 and 40wt% of hydroxyapatite (HA) nanoparticles and fabricated scaffolds with controlled macro-architecture. Then, we conducted experiments to investigate how the incorporation of HA in photo-crosslinked PTMC matrices improved human bone marrow stem cells osteogenic differentiation in vitro and kinetic of bone healing in vivo. We observed that bone regeneration was significantly improved using composite scaffolds containing as low as 20wt% of HA, along with difference in terms of osteogenesis and degree of implant osseointegration. Further investigations revealed that SLA process was responsible for the formation of a rich microscale layer of HA corralling scaffolds. To summarize, this work is of substantial importance as it shows how the fabrication of hierarchical biomaterials via surface-enrichment of functional HA nanoparticles in composite polymer stereolithographic structures could impact in vitro and in vivo osteogenesis. STATEMENT OF SIGNIFICANCE This study reports for the first time the enhance osteopromotion of composite biomaterials, with controlled macro-architecture and microscale distribution of hydroxyapatite particles, manufactured by stereolithography. In this process, the hydroxyapatite particles are not only embedded into an erodible polymer matrix, as reported so far in the literature, but concentrated at the surface of the structures. This leads to robust in vivo bone formation at low concentration of hydroxyapatite. The reported 3D self-corralling composite architecture provides significant opportunities to develop functional biomaterials for bone repair and tissue engineering.

[1]  Mahrokh Dadsetan,et al.  Evaluation of osteoconductive scaffolds in the canine femoral multi-defect model. , 2013, Tissue engineering. Part A.

[2]  A. Scherberich,et al.  Pericyte plasticity - comparative investigation of the angiogenic and multilineage potential of pericytes from different human tissues. , 2016, European cells & materials.

[3]  Sanat K. Kumar,et al.  Role of Casting Solvent on Nanoparticle Dispersion in Polymer Nanocomposites , 2014 .

[4]  Jan Feijen,et al.  The in vivo and in vitro degradation behavior of poly(trimethylene carbonate). , 2006, Biomaterials.

[5]  Jan Feijen,et al.  Preparation of a Designed Poly(trimethylene carbonate) Microvascular Network by Stereolithography , 2014, Advanced healthcare materials.

[6]  D. Grijpma,et al.  Preparation and mechanical properties of photo-crosslinked poly(trimethylene carbonate) and nano-hydroxyapatite composites. , 2015, Clinical hemorheology and microcirculation.

[7]  E. Schemitsch,et al.  The basic science of peri-implant bone healing , 2011, Indian journal of orthopaedics.

[8]  A. Bandyopadhyay,et al.  Bone tissue engineering using 3D printing , 2013 .

[9]  Huipin Yuan,et al.  Osteoinductive ceramics as a synthetic alternative to autologous bone grafting , 2010, Proceedings of the National Academy of Sciences.

[10]  Dong-Woo Cho,et al.  Development of 3D PPF/DEF scaffolds using micro-stereolithography and surface modification , 2009, Journal of materials science. Materials in medicine.

[11]  Metsger Ds,et al.  An autoradiographic study of calcium phosphate ceramic bone implants in turkeys. , 1993 .

[12]  Changqing Zhang,et al.  Three dimensionally printed mesoporous bioactive glass and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) composite scaffolds for bone regeneration. , 2014, Journal of materials chemistry. B.

[13]  D. Grijpma,et al.  Poly(trimethylene carbonate)-based composite materials for reconstruction of critical-sized cranial bone defects in sheep. , 2017, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.

[14]  J. Davies,et al.  Understanding peri-implant endosseous healing. , 2003, Journal of dental education.

[15]  Huipin Yuan,et al.  In vitro and in vivo bioactivity assessment of a polylactic acid/hydroxyapatite composite for bone regeneration. , 2014, Biomatter.

[16]  D. Cho,et al.  Bone regeneration using a microstereolithography-produced customized poly(propylene fumarate)/diethyl fumarate photopolymer 3D scaffold incorporating BMP-2 loaded PLGA microspheres. , 2011, Biomaterials.

[17]  J. Feijen,et al.  Preparation of biodegradable networks by photo-crosslinking lactide, epsilon-caprolactone and trimethylene carbonate-based oligomers functionalized with fumaric acid monoethyl ester. , 2005, Biomaterials.

[18]  K. Fukushima,et al.  Poly(trimethylene carbonate)-based polymers engineered for biodegradable functional biomaterials. , 2016, Biomaterials science.

[19]  J. Feijen,et al.  In Vitro Degradation of Trimethylene Carbonate Based (Co)polymers , 2002 .

[20]  M. Mackay,et al.  Phase behavior of polymer/nanoparticle blends near a substrate. , 2008, The Journal of chemical physics.

[21]  M. Ramazanoglu,et al.  Osseointegration and Bioscience of Implant Surfaces - Current Concepts at Bone-Implant Interface , 2011 .

[22]  Cato T Laurencin,et al.  Biomedical Applications of Biodegradable Polymers. , 2011, Journal of polymer science. Part B, Polymer physics.

[23]  P Augat,et al.  In vivo investigations on composites made of resorbable ceramics and poly(lactide) used as bone graft substitutes. , 2001, Journal of biomedical materials research.

[24]  J. Davies,et al.  In vitro modeling of the bone/implant interface , 1996, The Anatomical record.

[25]  Todd Emrick,et al.  Self-directed self-assembly of nanoparticle/copolymer mixtures , 2005, Nature.

[26]  P Ducheyne,et al.  Bioactive ceramics: the effect of surface reactivity on bone formation and bone cell function. , 1999, Biomaterials.

[27]  Huipin Yuan,et al.  Heterotopic bone formation by nano-apatite containing poly(D,L-lactide) composites. , 2010, European cells & materials.

[28]  J. Feijen,et al.  Resorbable elastomeric networks prepared by photocrosslinking of high-molecular-weight poly(trimethylene carbonate) with photoinitiators and poly(trimethylene carbonate) macromers as crosslinking aids. , 2011, Acta biomaterialia.

[29]  Valeria Chiono,et al.  An Overview of Poly(lactic-co-glycolic) Acid (PLGA)-Based Biomaterials for Bone Tissue Engineering , 2014, International journal of molecular sciences.

[30]  Craig J Hawker,et al.  General Strategies for Nanoparticle Dispersion , 2006, Science.

[31]  D. Venkataraman,et al.  Polymer Nanoparticle Assemblies: A Versatile Route to Functional Mesostructures , 2015 .

[32]  M. Bohner,et al.  Calcium phosphate bone graft substitutes: Failures and hopes , 2012 .

[33]  Anna C Balazs,et al.  Using nanoparticles to create self-healing composites. , 2004, The Journal of chemical physics.

[34]  J. Davies,et al.  Bone bonding at natural and biomaterial surfaces. , 2007, Biomaterials.

[35]  D. Puleo,et al.  Understanding and controlling the bone-implant interface. , 1999, Biomaterials.

[36]  Eleftherios Tsiridis,et al.  Bone substitutes: an update. , 2005, Injury.

[37]  R. Legeros,et al.  Calcium phosphate-based osteoinductive materials. , 2008, Chemical reviews.

[38]  D. Kaplan,et al.  Porosity of 3D biomaterial scaffolds and osteogenesis. , 2005, Biomaterials.

[39]  J. Feijen,et al.  Biodegradable elastomers for biomedical applications and regenerative medicine. , 2014, Regenerative medicine.

[40]  D. Grijpma,et al.  Fabrication of patient specific composite orbital floor implants by stereolithography , 2015 .

[41]  J. Davies,et al.  Mechanisms of endosseous integration. , 1998, The International journal of prosthodontics.

[42]  Michael D. McGehee,et al.  Conjugated Polymer Photovoltaic Cells , 2004 .

[43]  U. Joos,et al.  Ultrastructural characterization of the implant/bone interface of immediately loaded dental implants. , 2004, Biomaterials.

[44]  Joseph C Wenke,et al.  Effect of calcium phosphate coating and rhBMP-2 on bone regeneration in rabbit calvaria using poly(propylene fumarate) scaffolds. , 2015, Acta biomaterialia.

[45]  D. Grijpma,et al.  Resilient amorphous networks prepared by photo-crosslinking high-molecular-weight D,L-lactide and trimethylene carbonate macromers: mechanical properties and shape-memory behavior. , 2012, Macromolecular bioscience.

[46]  A. U. Daniels,et al.  Six bioabsorbable polymers: in vitro acute toxicity of accumulated degradation products. , 1994, Journal of applied biomaterials : an official journal of the Society for Biomaterials.

[47]  Anna C. Balazs,et al.  Nanoparticle Polymer Composites: Where Two Small Worlds Meet , 2006, Science.