DSP in the loop Implementation of the Control of a DFIG Used in Wind Power System

This work deals with the design and the implementation in DSP of the field oriented control of the grid connected doubly fed induction generator (DFIG) used in the wind power system. DFIG’s stator is coupled directly to the grid, whereas its rotor is linked via a cascade of converters to the grid. The idea is to implement a system for decoupled control of the powers generated by the stator in order to provide high performance and better system execution.To test the complete conversion system, a simulation study under Matlab/Simulink environment was performed. To approve the control strategies, its control algorithms were implemented in DSP as hardware in the loop.

[1]  Abdelhamid Benakcha,et al.  Performance of PI controller for control of active and reactive power in DFIG operating in a grid-connected variable speed wind energy conversion system , 2014 .

[2]  Elhassane Abdelmounim,et al.  DSP in the Loop Implementation of a Backstepping Controller for Wind Energy Conversion System Based on a Doubly Fed Induction Generator Connected to Grid , 2019 .

[3]  Eduard Muljadi,et al.  The History and State of the Art of Variable‐Speed Wind Turbine Technology , 2003 .

[4]  P.M.M. Bongers,et al.  Modeling and Identification of Flexible Wind Turbines and A Factorizational Approach to Robust Control Design , 1994 .

[5]  T. Ahmed-Ali,et al.  A combined high gain observer and high-order sliding mode controller for a DFIG-based wind turbine , 2010, 2010 IEEE International Energy Conference.

[6]  Khaled Elleuch,et al.  On the Wind Energy Conversion Systems , 2018, 2018 15th International Multi-Conference on Systems, Signals & Devices (SSD).

[7]  Lucy Pao,et al.  Optimal Control of Wind Energy Systems: Towards a Global Approach (Munteanu, I. et al.; 2008) [Bookshelf] , 2009, IEEE Control Systems.

[8]  E. Abdelmounim,et al.  Power Control of a Wind Energy Conversion System based on a Doubly Fed Induction Generator , 2019, Proceedings of the Third International Conference on Computing and Wireless Communication Systems, ICCWCS 2019, April 24-25, 2019, Faculty of Sciences, Ibn Tofaïl University -Kénitra- Morocco.

[9]  Elhabib Lotfi,et al.  DSP Implementation in the Loop of the Indirect Rotor Field Orientation control for the Three-Phase Asynchronous Machine , 2017, ICCWCS'17.

[10]  Ilhem Slama-Belkhodja,et al.  Power distribution law in a Doubly Fed Induction Machine , 2006, Math. Comput. Simul..

[11]  Elhassane Abdelmounim,et al.  Fuzzy Logic Control for Wind Energy Conversion System based on DFIG , 2019, 2019 International Conference on Wireless Technologies, Embedded and Intelligent Systems (WITS).

[12]  Charles J Mozina,et al.  Wind-Power Generation , 2011, IEEE Industry Applications Magazine.

[13]  Jie Wang,et al.  Active and reactive power control of the doubly fed induction generator based on wind energy conversion system , 2016 .

[14]  L. Freris.  Wind energy conversion systems , 1990 .

[15]  Elhassane Abdelmounim,et al.  DSP Implementation in the Loop of the Vector Control Drive of a Permanent Magnet Synchronous Machine , 2017, ICCWCS'17.

[16]  Elhassane Abdelmounim,et al.  Control Strategies for DFIG based on Wind Energy Conversion System using RST and Fuzzy Logic Controllers , 2019, 2019 International Conference of Computer Science and Renewable Energies (ICCSRE).