A fully-integrated self-healing power amplifier

A fully-integrated self-healing mm-wave power amplifier heals process variation, load mismatch, and transistor failure with on-chip sensors, actuators and an integrated digital algorithm ASIC without external calibration. Measurements of 20 chips showed increased RF power up to 3dB, or reduced DC power by 50% in backoff at 28 GHz. Healing 4-1 VSWR load mismatch for RF and DC power improvement was verified, and healing after laser induced transistor failure increased RF power up to 4.8dB.

[1]  Kaushik Sengupta,et al.  On-chip sensing and actuation methods for integrated self-healing mm-wave CMOS power amplifier , 2012, 2012 IEEE/MTT-S International Microwave Symposium Digest.

[2]  A. Pham,et al.  RF Characterization of SiGe HBT Power Amplifiers Under Load Mismatch , 2007, IEEE Transactions on Microwave Theory and Techniques.

[3]  Mau-Chung Frank Chang,et al.  A V-band self-healing power amplifier with adaptive feedback bias control in 65 nm CMOS , 2011, 2011 IEEE Radio Frequency Integrated Circuits Symposium.

[4]  Zoya Popovic,et al.  Adaptive tuning for handheld transmitters , 2009, 2009 IEEE MTT-S International Microwave Symposium Digest.

[5]  E. Nowak,et al.  High-performance CMOS variability in the 65-nm regime and beyond. IBM J Res And Dev , 2006 .