3D printing of hydroxyapatite/tricalcium phosphate scaffold with hierarchical porous structure for bone regeneration

[1]  Charlie C. L. Wang,et al.  Challenges and Status on Design and Computation for Emerging Additive Manufacturing Technologies , 2019, J. Comput. Inf. Sci. Eng..

[2]  Qifa Zhou,et al.  Recent Progress in Biomimetic Additive Manufacturing Technology: From Materials to Functional Structures , 2018, Advanced materials.

[3]  Yayue Pan,et al.  Mask Video Projection Based Stereolithography With Continuous Resin Flow to Build Digital Models in Minutes , 2018, Volume 1.

[4]  Qifa Zhou,et al.  3D‐Printed Biomimetic Super‐Hydrophobic Structure for Microdroplet Manipulation and Oil/Water Separation , 2018, Advanced materials.

[5]  Jimin Chen,et al.  3D printing of hydroxyapatite scaffolds with good mechanical and biocompatible properties by digital light processing , 2018, Journal of Materials Science.

[6]  A. J. Hamad.  Size and shape effect of specimen on the compressive strength of HPLWFC reinforced with glass fibres , 2017 .

[7]  Z. Qian,et al.  Artificial periosteum in bone defect repair—A review , 2017 .

[8]  Fei Yang,et al.  Effects of HAp and TCP in constructing tissue engineering scaffolds for bone repair. , 2017, Journal of materials chemistry. B.

[9]  Yong Chen,et al.  Micro-scale feature fabrication using immersed surface accumulation , 2017 .

[10]  C. Domingo,et al.  Synthetic scaffolds with full pore interconnectivity for bone regeneration prepared by supercritical foaming using advanced biofunctional plasticizers , 2017, Biofabrication.

[11]  Chengtie Wu,et al.  3D-printed bioceramic scaffolds with antibacterial and osteogenic activity , 2017, Biofabrication.

[12]  Xuetao Shi,et al.  Fabrication of β-tricalcium phosphate composite ceramic sphere-based scaffolds with hierarchical pore structure for bone regeneration , 2017, Biofabrication.

[13]  Jianzhong Fu,et al.  Bone regeneration in 3D printing bioactive ceramic scaffolds with improved tissue/material interface pore architecture in thin-wall bone defect , 2017, Biofabrication.

[14]  Xuan Song,et al.  Porous Structure Fabrication Using a Stereolithography-Based Sugar Foaming Method , 2017 .

[15]  K. Shung,et al.  Piezoelectric component fabrication using projection-based stereolithography of barium titanate ceramic suspensions , 2017 .

[16]  Warren L. Grayson,et al.  Comparison of 3D-Printed Poly-ɛ-Caprolactone Scaffolds Functionalized with Tricalcium Phosphate, Hydroxyapatite, Bio-Oss, or Decellularized Bone Matrix. , 2016, Tissue engineering. Part A.

[17]  C. V. van Blitterswijk,et al.  Toward mimicking the bone structure : design of novel hierarchical scaffolds with a tailored radial porosity gradient , 2017 .

[18]  Wenyao Xu,et al.  Mass Customization: Reuse of Digital Slicing for Additive Manufacturing , 2016, J. Comput. Inf. Sci. Eng..

[19]  Tsz-Ho Kwok,et al.  A Reverse Compensation Framework for Shape Deformation in Additive Manufacturing , 2016 .

[20]  Wei Zhao,et al.  Effects of firing temperature on the microstructures and properties of porous mullite ceramics prepared by foam-gelcasting , 2016 .

[21]  Kartik V. Bulusu,et al.  A synergistic approach to the design, fabrication and evaluation of 3D printed micro and nano featured scaffolds for vascularized bone tissue repair , 2016, Nanotechnology.

[22]  Chengtie Wu,et al.  Graphene-oxide-modified β-tricalcium phosphate bioceramics stimulate in vitro and in vivo osteogenesis , 2015 .

[23]  Xuan Song,et al.  Ceramic Fabrication Using Mask-Image-Projection- based Stereolithography Integrated with Tape-casting , 2015 .

[24]  Jingzhou Yang,et al.  Structure design and manufacturing of layered bioceramic scaffolds for load-bearing bone reconstruction , 2015, Biomedical materials.

[25]  Chee Meng Benjamin Ho,et al.  A review on 3D printed bioimplants , 2015 .

[26]  A. Bandyopadhyay,et al.  SrO- and MgO-doped microwave sintered 3D printed tricalcium phosphate scaffolds: mechanical properties and in vivo osteogenesis in a rabbit model. , 2015, Journal of biomedical materials research. Part B, Applied biomaterials.

[27]  Gang Li,et al.  Three-dimensional CaP/gelatin lattice scaffolds with integrated osteoinductive surface topographies for bone tissue engineering , 2015, Biofabrication.

[28]  Sophie C Cox,et al.  3D printing of porous hydroxyapatite scaffolds intended for use in bone tissue engineering applications. , 2015, Materials science & engineering. C, Materials for biological applications.

[29]  Manuel F. C. Pereira,et al.  Fabrication of individual alginate-TCP scaffolds for bone tissue engineering by means of powder printing , 2015, Biofabrication.

[30]  E. Gutmanas,et al.  β-TCP-polylactide composite scaffolds with high strength and enhanced permeability prepared by a modified salt leaching method. , 2014, Journal of the mechanical behavior of biomedical materials.

[31]  V M Gaspar,et al.  Manufacture of β-TCP/alginate scaffolds through a Fab@home model for application in bone tissue engineering , 2014, Biofabrication.

[32]  Miguel Castilho,et al.  Direct 3D powder printing of biphasic calcium phosphate scaffolds for substitution of complex bone defects , 2014, Biofabrication.

[33]  Wei Huang,et al.  Fabrication of HA/β‐TCP scaffolds based on micro‐syringe extrusion system , 2013 .

[34]  Chi Zhou,et al.  Digital material fabrication using mask‐image‐projection‐based stereolithography , 2013 .

[35]  Vamsi Krishna Balla,et al.  Microwave‐sintered 3D printed tricalcium phosphate scaffolds for bone tissue engineering , 2013, Journal of tissue engineering and regenerative medicine.

[36]  Jinku Kim,et al.  Rapid-prototyped PLGA/β-TCP/hydroxyapatite nanocomposite scaffolds in a rabbit femoral defect model , 2012, Biofabrication.

[37]  Y. Zuo,et al.  Fabrication of Hydroxyapatite/Ethylene-Vinyl Acetate/Polyamide 66 Composite Scaffolds by the Injection-Molding Method , 2011 .

[38]  A. Roosen,et al.  Effect of powder, binder and process parameters on anisotropic shrinkage in tape cast ceramic products , 2010 .

[39]  Frederik L. Giesel,et al.  3D printing based on imaging data: review of medical applications , 2010, International Journal of Computer Assisted Radiology and Surgery.

[40]  N. Kuboyama,et al.  A biodegradable porous composite scaffold of PGA/beta-TCP for bone tissue engineering. , 2010, Bone.

[41]  Chi Zhou,et al.  Optimized Mask Image Projection for Solid Freeform Fabrication , 2009, DAC 2009.

[42]  S. Hollister.  Scaffold Design and Manufacturing: From Concept to Clinic , 2009, Advanced materials.

[43]  I G Turner,et al.  Fabrication of HA/TCP scaffolds with a graded and porous structure using a camphene-based freeze-casting method. , 2009, Acta biomaterialia.

[44]  Y. Chai,et al.  Stem Cell Property of Postmigratory Cranial Neural Crest Cells and Their Utility in Alveolar Bone Regeneration and Tooth Development , 2009, Stem cells.

[45]  M. Jordán,et al.  Influence of firing temperature and mineralogical composition on bending strength and porosity of ceramic tile bodies , 2008 .

[46]  S. Girod,et al.  Embryonic origin and Hox status determine progenitor cell fate during adult bone regeneration , 2008, Development.

[47]  Jian Li,et al.  Mechanical and biological properties of hydroxyapatite/tricalcium phosphate scaffolds coated with poly(lactic-co-glycolic acid). , 2008, Acta biomaterialia.

[48]  Marisa A. Sambito,et al.  Increased osteoblast functions on undoped and yttrium-doped nanocrystalline hydroxyapatite coatings on titanium. , 2006, Biomaterials.

[49]  Byung-Soo Kim,et al.  Poly(lactide-co-glycolide)/hydroxyapatite composite scaffolds for bone tissue engineering. , 2006, Biomaterials.

[50]  S. Milz,et al.  Hydroxyapatite scaffolds for bone tissue engineering made by 3D printing , 2005, Journal of materials science. Materials in medicine.

[51]  John W. Halloran,et al.  Freeform Fabrication of Ceramics via Stereolithography , 2005 .

[52]  A. Nakahira,et al.  Fabrication of Porous Hydroxyapatite Using Hydrothermal Hot Pressing and Post‐Sintering , 2005 .

[53]  Amit Bandyopadhyay,et al.  Pore size and pore volume effects on alumina and TCP ceramic scaffolds , 2003 .

[54]  A Boyde,et al.  Autologous bone marrow stromal cells loaded onto porous hydroxyapatite ceramic accelerate bone repair in critical-size defects of sheep long bones. , 2000, Journal of biomedical materials research.

[55]  A. Boccaccini,et al.  In Situ Characterization of the Shrinkage Behavior of Ceramic Powder Compacts during Sintering by Using Heating Microscopy , 1998 .

[56]  William Hoffman,et al.  Intracranial Migration of Microplates Versus Wires in Neonatal Pigs After Frontal Advancement , 1998, The Journal of craniofacial surgery.

[57]  S. Zissi,et al.  Stereolithography and microtechniques , 1996 .

[58]  Jack C. Yu,et al.  An Experimental Study of the Effects of Craniofacial Growth on the Long‐Term Positional Stability of Microfixation , 1996, The Journal of craniofacial surgery.

[59]  Frisch,et al.  Lattice gas automata for the Navier-Stokes equations. a new approach to hydrodynamics and turbulence , 1989 .

[60]  Jie Jin,et al.  3D Printing Temporary Crown and Bridge by Temperature Controlled Mask Image Projection Stereolithography , 2018 .

[61]  B. Basu.  Natural Bone and Tooth: Structure and Properties , 2017 .

[62]  Peter Beike,et al.  Beyond Anova Basics Of Applied Statistics , 2016 .

[63]  Jason A Inzana,et al.  3D Printing of Calcium Phosphate Ceramics for Bone Tissue Engineering and Drug Delivery , 2016, Annals of Biomedical Engineering.

[64]  L. Witek.  Extrusion-based, three-dimensional printing of calcium-phosphate scaffolds , 2015 .

[65]  R. Rice,et al.  Comparison of stress concentration versus minimum solid area based mechanical property-porosity relations , 1993, Journal of Materials Science.

[66]  Paul F. Jacobs,et al.  Rapid Prototyping & Manufacturing: Fundamentals of Stereolithography , 1992 .