An empirical validation of the daylighting algorithms and associated interactions in building energy simulation programs using various shading devices and windows

Empirical validation of building energy simulation programs is an important technique in examining the effectiveness and accuracies of implemented algorithms. In recent years, daylighting algorithms incorporated in building energy simulation programs have become increasingly sophisticated in their abilities to predict the illuminance, light power reductions, and the associated thermal load interactions. The focus of this study was to examine measured and simulated light levels in an actual building constructed for research purposes. Daylighting models were constructed in EnergyPlus and DOE-2.1E and the predicted illuminance and light power were compared with measurements; an assessment of heating and cooling interactions using a variable-air-volume reheat (VAVRH) system was also performed by analyzing reheat coil powers for the VAV boxes. The average differences from EnergyPlus for reference point daylight illuminance, light power, and reheat coil power predictions were within 119.2%, 16.9%, and 17.3%, respectively. DOE-2.1E predicted reference point daylight illuminances were within 114.1%, light powers were within 26.3%, and reheat coil power were within 25.4%.

[1]  Leon Jay Gleser,et al.  Assessing uncertainty in measurement , 1998 .

[2]  Kevin J. Lomas,et al.  Empirical validation of building energy simulation programs , 1997 .

[3]  H. Manz,et al.  Empirical validation of models to compute solar irradiance on inclined surfaces for building energy simulation , 2007 .

[4]  P. Strachan,et al.  Model validation using the PASSYS Test cells , 1993 .

[5]  Steve Gates,et al.  Daylighting analysis for classrooms using DOE-2.1B , 1984 .

[6]  Gregory M. Maxwell,et al.  An Empirical Validation of Modeling Solar Gains Through a Glazing Unit Using Building Energy Simulation Programs , 2006 .

[7]  Paul Strachan,et al.  Series of experiments for empirical validation of solar gain modeling in building energy simulation codes—Experimental setup, test cell characterization, specifications and uncertainty analysis , 2006 .

[8]  Magali Bodart,et al.  Global energy savings in offices buildings by the use of daylighting , 2002 .

[9]  Gregory M. Maxwell,et al.  Economizer Control Tests for the Empirical Validation of Building Energy Analysis Tools A Report of Task 22, Subtask D Building Energy Analysis Tools Project D Empirical Validation , 2004 .

[10]  Sergio Sibilio,et al.  De-Light: a software tool for the evaluation of direct daylighting illuminances both indoors and outdoors—comparison with Superlite 2.0 and Lumen Micro 7.1. , 2000 .

[11]  R. D. Judkoff,et al.  Validation of building energy analysis simulation programs at the solar energy research institute , 1988 .

[12]  Stephen Selkowitz,et al.  Daylighting simulation in the DOE-2 building energy analysis program , 1985 .

[13]  Gordon H. Hart,et al.  The use of DOE-2 to determine the relative energy performance of daylighted retail stores covered with tension supported fabric roofs , 1984 .

[14]  Kjeld Johnsen.  Daylight in buildings, collaborative research in the International Energy Agency (IEA Task 21) , 1998 .

[15]  Peter Gregory Loutzenhiser.  Empirical validations of the DOE-2.1E building simulation software for daylighting and economizer controls , 2003 .

[16]  J. Michalsky,et al.  Modeling daylight availability and irradiance components from direct and global irradiance , 1990 .

[17]  Danny H.W. Li,et al.  Daylighting and its effects on peak load determination , 2005 .

[18]  Gregory M. Maxwell,et al.  Daylighting - HVAC Interaction Tests for the Empirical Validation of Building Energy Analysis , 2003 .

[19]  George N Walton,et al.  Thermal Analysis Research Program reference manual , 1983 .

[20]  P. Ineichen,et al.  The importance of correct albedo determination for adequately modeling energy received by tilted surfaces , 1987 .

[21]  Andreas K. Athienitis,et al.  Workplane illuminance prediction method for daylighting control systems , 2003 .

[22]  P. Wouters,et al.  The use of outdoor test cells for thermal and solar building research within the PASSYS project , 1993 .

[23]  Som S Shrestha.  EMPIRICAL VALIDATION OF BUILDING ENERGY SIMULATION SOFTWARE: ENERGYPLUS , 2006 .

[24]  Gregory M. Maxwell,et al.  A comparison of DOE-2.1E daylighting and HVAC system interactions to actual building performance , 2006 .

[25]  Fabio Bisegna,et al.  Daylighting with external shading devices: design and simulation algorithms , 2006 .

[26]  Søren Østergaard Jensen,et al.  Validation of building energy simulation programs: a methodology , 1995 .

[27]  Gregory M. Maxwell,et al.  An empirical validation of modelling solar gain through a glazing unit with external and internal shading screens , 2007 .