A simplified approach to simulate prescribed boundary layer flow conditions in a multiple controlled fan wind tunnel

Abstract The development of a method to simulate desired approach flow characteristics in a multiple controlled fan boundary layer wind tunnel (MCFWT) is described. A MCFWT uses flow control techniques to impart the desired turbulence characteristics in lieu of using a roughness grid upwind of the test section to generate a boundary layer. In contrast to other MCWFT techniques, the proposed approach (a) relies on the direct simulation of scaled wind speed and direction records and (b) implements a closed-loop proportional-integral-derivative controller to modulate the wind speed and control the turbulence characteristics. A case study is presented using a 1:10 scale model of the Full-Scale Test Facility at the Insurance Institute for Business & Home Safety Research Center. Simulation of marine, open and suburban approach boundary layer flow yields good agreement between the model and measured values, including mean velocity and turbulence intensity profiles, integral length scales and power spectra. Control of longitudinal and lateral fluctuations is considered herein; Good agreement between the target and measured vertical turbulence intensity profiles was also achieved after the longitudinal and lateral turbulence profiles were matched.

[1]  J. Counihan.  Adiabatic atmospheric boundary layers: A review and analysis of data from the period 1880–1972 , 1975 .

[2]  Akihide Hatanaka,et al.  Active generation of wind gust in a two-dimensional wind tunnel , 1992 .

[3]  Peter J. Vickery,et al.  Hurricane Gust Factors Revisited , 2005 .

[4]  Akira Nishi,et al.  Reproduction of wind velocity history in a multiple fan wind tunnel , 2001 .

[5]  Kishor C. Mehta,et al.  Texas Tech field experiments for wind loads part 1: building and pressure measuring system , 1992 .

[6]  Kishor C. Mehta,et al.  Texas tech field experiments for wind loads part II: meteorological instrumentation and terrain parameters , 1992 .

[7]  J. Bendat,et al.  Random Data: Analysis and Measurement Procedures , 1987 .

[8]  H. W. Teunissen,et al.  Simulation of the planetary boundary layer in a multiple-jet wind tunnel , 1972 .

[9]  Robert H. Scanlan,et al.  Active modeling of large-scale turbulence , 1983 .

[10]  A. Nishi,et al.  Computer-controlled wind tunnel for wind-engineering applications , 1995 .

[11]  M. E. Greenway.  An analytical approach to wind velocity gust factors , 1979 .

[12]  A. Nishi,et al.  Active control of turbulence for an atmospheric boundary layer model in a wind tunnel , 1999 .

[13]  P. Vickery,et al.  Toward Objective, Standardized Intensity Estimates from Surface Wind Speed Observations , 2010 .

[14]  Toshio Ueda,et al.  Active simulation of time histories of strong wind gust in a wind tunnel , 1994 .

[15]  Jun Kanda,et al.  Flow simulation by wind tunnel with computer-controlled multiple fans , 1999 .

[16]  J. Bendat,et al.  Random Data: Analysis and Measurement Procedures , 1971 .