The assembly of a silicone strip sensor with microcable and the readout chip is called in the CBM STS collaboration a “module”. To connect the double-sided CBM sensor with 1024 channels on each side via microcables to the CBM STS-XYTER chip the tab-bonding process was chosen. One microcable has 64 channels with a pitch of 116 μm and a lead width of 46 μm. The thickness of the aluminium lead is 14 μm and the thickness of the polyimide substrate is 10 μm. Consequently the microcable is easily floating, fragile and not easy to handle without tooling. For the assembly of the chip or of the sensor to the microcable, the microcable has to be moved in two translational and one rotational directions (see Fig. 1). Therefore