A moving-coil designed micro-mechanics tester with application on MEMS

A moving-coil designed micro-mechanics tester, named as MicroUTM (universal testing machine), is in-house developed in this paper for micro-mechanics tests. The main component is a moving coil suspended in a uniform magnetic field through a set of springs. When a current passes through the coil, the electromagnetic force is proportional to the magnitude of the current, so the load can easily be measured by the current. The displacement is measured using a capacitive sensor. The load is calibrated using a Sartorius BP211D analytical balance, with a resolution/range of 0.01 mg/80 g or 0.1 mg/210 g. The displacement is calibrated using a HEIDENHAIN CT-6002 length gauge with an accuracy of ±0.1 µm. The calibration results show that the load range is ±1 N and the displacement range is ±300 µm. The noise levels of the load and displacement are 50 µN and 150 nm, respectively. The nonlinearity of the load is only 0.2%. Several in-plane load tests of the MEMS micro-cantilever are performed using this tester. Experimental results, with excellent repeatability, demonstrate the reliability of the load measurement as well as the flexible function of this tester.

[1]  Dong-il Dan Cho,et al.  A novel electrostatic vertical actuator fabricated in one homogeneous silicon wafer using extended SBM technology , 2002 .

[2]  M. Skove,et al.  Device for simultaneously measuring stress, strain, and resistance in ‘‘whiskerlike’’ materials in the temperature range 1.5 K , 1991 .

[3]  T. Tsuchiya,et al.  Tensile testing of insulating thin films; humidity effect on tensile strength of SiO2 films , 1999 .

[4]  David T. Read,et al.  A tensile-testing technique for micrometer-sized free-standing thin films , 2005 .

[5]  S. Hong,et al.  Characterization of elastic moduli of Cu thin films using nanoindentation technique , 2005 .

[6]  Kozaburo Hayashi,et al.  Tensile Tests of Collagen Fibers Obtained from the Rabbit Patellar Tendon , 1999 .

[7]  P. Dario,et al.  An Instrumented Probe for Mechanical Characterization of Soft Tissues , 2001 .

[8]  Zhengwei Pan,et al.  Tensile tests of ropes of very long aligned multiwall carbon nanotubes , 1999 .

[9]  P. Dario,et al.  Design and fabrication of an electrostatically driven microgripper for blood vessel manipulation , 2006 .

[10]  Timothy P. Weihs,et al.  Mechanical deflection of cantilever microbeams: A new technique for testing the mechanical properties of thin films , 1988 .

[11]  C. J. Wilson,et al.  Fracture testing of silicon microcantilever beams , 1996 .

[12]  R. L. Edwards,et al.  A new technique for measuring the mechanical properties of thin films , 1997 .

[13]  Zhigang Suo,et al.  New directions in mechanics , 2005 .

[14]  D. Kwon,et al.  Film-thickness considerations in microcantilever-beam test in measuring mechanical properties of metal thin film , 2003 .

[15]  Sigitas Tamulevičius,et al.  Electronic speckle pattern interferometry for mechanical testing of thin films , 2004 .

[16]  S. Mall,et al.  Nanoindentation technique for characterizing cantilever beam style RF microelectromechanical systems (MEMS) switches , 2005 .

[17]  C. Lim,et al.  Novel approach to tensile testing of micro- and nanoscale fibers , 2004 .

[18]  David T. Read,et al.  Tensile properties of free-standing aluminum thin films☆ , 2001 .